Patch is out
- Thread starter Meshman
- Start date
Here's a link to the release announcement: http://www.prepar3d.com/news/2014/02/4845/.
Crusader
SOH-CM-2022
I changed my starting point from freezing my arse off in Ohio to Ford Island and palm trees . I've only flown " The Stear " a few t & g's at NPS so far but what I've seen ladies and gents , your really going to like the changes . Take my word for it . 
Certainly looks like a keeper and I sincerely thank LM for all the excellent service and hard work they put into this v2.1 update . Serious flying tomorrow (all over the world).Rich
Certainly looks like a keeper and I sincerely thank LM for all the excellent service and hard work they put into this v2.1 update . Serious flying tomorrow (all over the world).Rich
Last edited:
I have to admit that while reading the list of fixes, there were scant few that really pertained to anything I had run into up to this point. A lot of them were over my head (technically) so I have no clue what they were for. To me, the sim looks no different than it did last night when I did some MP Hops and I'm not sure it was supposed to look any different really. So, I have added the fixes, restarted the sim and flown a few hops. . . .right off the bat, it won't retain any mapped buttons on my joystick or throttle. I spent the better part of an hour going over and over the same setups that I had before the patch was applied and not once did it retain any of them. That's not gonna hack it because I don't use keystrokes to fly. That will be my first post on the LM Forums tomorrow. I'll try again in the morning.
CG_1976
Ret. US Coastie/RCAF
Thanks for the HU on the Patch. Certainly my Pro Plus V2.1 is running much smoother on my GT610 2Gb card. Even my custom USCG/CCG AI for Sea and Air is taxing the frames. Jim's Corpus Christi CGAS is happy as pie with 2.1 and no more drop sticks in mid-flight. Now where did I leave my Iris C27J from the last flight?? Now all that's needed is to get Instant Scenery compatible in 2.1.
Awesome, thanks for the head up. I stopped my scenery development because of the patch. I think we have a better re-starting point now.
Cheers,
Mark
Cheers,
Mark
Of course, after I do the patch installation, I go back this morning and find a post that says basically. . ."Oh, by the way, it would be a good idea to delete the files/content of these 4 folders to ensure a good install". Maybe that should have been mentioned as part of the patch process? lol. . .
Also. . .anyone know where to find these? I got the first one. . .but the others, I don't find anything close on my system. . .and yes I have hidden files showing.
%PROGRAMDATA%\Lockheed Martin\Prepar3D v2. . . .saved backup/deleted content.
%LOCALAPPDATA%\Lockheed Martin\Prepar3D v2. . . can't find
%APPDATA%\Lockheed Martin\Prepar3D v2. . . . . . . can't find
%USERPROFILE%\Documents\Prepar3D v2 Files. . . . can't find
Also. . .anyone know where to find these? I got the first one. . .but the others, I don't find anything close on my system. . .and yes I have hidden files showing.
%PROGRAMDATA%\Lockheed Martin\Prepar3D v2. . . .saved backup/deleted content.
%LOCALAPPDATA%\Lockheed Martin\Prepar3D v2. . . can't find
%APPDATA%\Lockheed Martin\Prepar3D v2. . . . . . . can't find
%USERPROFILE%\Documents\Prepar3D v2 Files. . . . can't find
Crusader
SOH-CM-2022
Ed , when I copied and pasted each line into the Windows Start (then into the search box) it took me right to the folder . I am running Windows 7 64 bit . The second line was the Shaders Folder , the 3rd line was the folder containing the dll.xml , exe.dll , and Prepar3D.cfg and the 4th line was where all your Saved Flights are . fxml and WX files . Sorry for the very non-tech explanation . Maybe someone with more knowledge than me can make an easier explanation .
Hope this gets you to where you want to be . I just did the update without the above deletions you gave which LM stated you can do if you are not experiencing any issues which so far I'm not . (Other than the FSDT Hawaiian Airports I have loaded and this I experienced in FSX and v1.4 . From what I've read it is a Add On Manager issue that FSDT uses and not P3D) . I'm still contemplating downloading the 10Gig+ Full Installer and starting from scratch . It just means a heck of a lot of reinstalling but I like the idea of a fresh install and gradually piece AC and scenery into v2.1 . I still have v1.4 on the HHD so it shouldn't be too bad of a task , just time consuming .
DOH!! Thanks. . .I never use the "Windows Start" option. . .never thought about that. Thanks!
Well, uninstalling current version 2 with the patch applied and downloading the 10Gig full install. The sim will not hold any of the mapping I had for my throttle or joystick. I can go into the "Control" setting menu. . .setup all the buttons for various functions, save the settings, come back out to the sim and they're gone. So dumping the sim and starting over from scratch. Not happy right now.
Navy Chief
Senior Member
With all the problems reported with this update, I am glad I didn't rush to download and install it.
Is there a text file with the download that tells exactly what to do, prior to installing this??
If not, can someone post a link to a forum thread that does give instructions on this?
thanks, NC
Is there a text file with the download that tells exactly what to do, prior to installing this??
If not, can someone post a link to a forum thread that does give instructions on this?
thanks, NC
Here ya go.
http://www.prepar3d.com/forum-5/?mingleforumaction=viewtopic&t=5415
This explains the process if you already have 2.0 and are applying the patch. Hope this helps.
Navy Chief
Senior Member
Here ya go.
http://www.prepar3d.com/forum-5/?mingleforumaction=viewtopic&t=5415
This explains the process if you already have 2.0 and are applying the patch. Hope this helps.
Exactly what I was searching for. Thank you, Ed!
Well, not getting any better. Here's what I've done. Uninstalled the old 2.0+patch. Removed every remnant from the HDD. Installed the new 10gig download. Loaded P3D Ver2.1 and loaded the F-22. Went into the "controls" setup and set the button mapping just for the joystick (12 buttons). Got out and flew a circuit in the Raptor. . .all the buttons functioned correctly. Landed and loaded the f-35. . .shot some T&G's a few circuits to do some sightseeing and all the buttons continued to function. Landed, checked the controls menu for the button mapping. All was still as it should be. Loaded the T-6 TexanII and took off and things didn't seem right. I checked the controls setup and none of the buttons were mapped anymore. Very frustrating.
CG_1976
Ret. US Coastie/RCAF
Can you explain that a bit more please? Being curious as a polar bear chilling in Texas
.
luckydog
Charter Member 2014
Can you explain that a bit more please? Being curious as a polar bear chilling in Texas
.....continuous problems/patches that will eventually require an extreme investment in computer modification...........
andersel
Charter Member 2014
I've been flying v2.0 "right out of the box" (with the exception of a few added aircraft). No problems so far.
After reading about the problems some folks seem to be having with the v2.1 patch, I think I'll hold off on installing it. I guess, like so many software "upgrades", it might behoove one to let whatever glitches are extant have a bit of time to shake themselves out.
We'll see...
LA
After reading about the problems some folks seem to be having with the v2.1 patch, I think I'll hold off on installing it. I guess, like so many software "upgrades", it might behoove one to let whatever glitches are extant have a bit of time to shake themselves out.
We'll see...
LA