• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

MV22B Rel1.0 released

Gauge Problem

Why do my gauges only show parcial screen Other than that love the aircraft. Fly's great.
 

Attachments

  • 2017-5-6_10-14-58-708.jpg
    2017-5-6_10-14-58-708.jpg
    61.1 KB · Views: 0
MV-22B Paint/Livery

Postbaer61 said:
Just installed in FSX ACC Win7 64 without Problems
works fine

ScreenShot03-10-17at06.55PM001.jpg


ScreenShot03-10-17at06.55PM.jpg


ScreenShot03-10-17at06.56PM.jpg


ScreenShot03-10-17at06.58PM.jpg
Click to expand...
Hi Postbaer61, I've been admiring your screenshots of the new MV-22B by Maryadi.
I particularly like the VC shot with the black background. All the versions of the MV-22Bthat I have found so far have a gray background to the interior views. So my question is: Does the USAF 0030 come with that black interior and, if so, where can I get it from?
In the Aircraft.cfg, the section [fltsim.0] is titled "CV-22B Osprey USAF" and the 'texture' line is just "texture= ". Other lines show: atc_id=0033; atc_airline=Air Force; atc_flight_number=0033 and ui_variation="grey".
P3D does not show an aircraft for [fltsim.0]. Is this meant to be just a basis for third-party liveries?
 
speedy70 said:
Hi Maryadi and welcome to the forum.

Thank you for your super model.I am 79 and with one bit of help have managed to take off,hover and fly your model wonderful.

Your gift is greatly appreciated.

Cheers Chris
Click to expand...

Hi Chris,
I completely agree with your comments on Maryadi's MV-22B - super only begins to describe it!
Just to trump your ace: You're just a lad! I'm 85 and still able to grapple with the intricacies of flight simulation. Keeps the "Little Grey Cells" chugging along, as Hercule Poirot says.
I see you live in Devon. I come from Salisbury but have lived in Canada for the last 50 years - with absolutely no regrets...
And, yes, we are all deeply indebted to Maryadi for his kindness and workmanship. What a labour of love!

Cheers,

Mark
 
freded said:
Hi Chris,
I completely agree with your comments on Maryadi's MV-22B - super only begins to describe it!
Just to trump your ace: You're just a lad! I'm 85 and still able to grapple with the intricacies of flight simulation. Keeps the "Little Grey Cells" chugging along, as Hercule Poirot says.
I see you live in Devon. I come from Salisbury but have lived in Canada for the last 50 years - with absolutely no regrets...
And, yes, we are all deeply indebted to Maryadi for his kindness and workmanship. What a labour of love!

Cheers,

Mark
Click to expand...

Thank you Mark and all of you. without you all I just nothing

Big Thank you to Allah SWT that give me life, time and chance.
 
freded said:
Hi Postbaer61, I've been admiring your screenshots of the new MV-22B by Maryadi.
I particularly like the VC shot with the black background. All the versions of the MV-22Bthat I have found so far have a gray background to the interior views. So my question is: Does the USAF 0030 come with that black interior and, if so, where can I get it from?
QUOTE]

Hi Mark,

The black interior comes from my reshade settings ( Shader tool ), which darkened the shadows.
I have the same gray textures like you.

ScreenShot04-29-17at05.03PM.jpg


and ui variation="Grey", refers to the color of this repaint variant.
Click to expand...
 
AutoPilot

Can't get autopilot to work. Manual doesn't seem to help me. Would appreciate any help. When hit the on switch it just beeps. The A/C is outstanding.
 
Postbaer61 said:
freded said:
Hi Postbaer61, I've been admiring your screenshots of the new MV-22B by Maryadi.
I particularly like the VC shot with the black background. All the versions of the MV-22B that I have found so far have a gray background to the interior views. So my question is: Does the USAF 0030 come with that black interior and, if so, where can I get it from?
QUOTE]

Hi Mark,

The black interior comes from my reshade settings ( Shader tool ), which darkened the shadows.
I have the same gray textures like you.

and ui variation="Grey", refers to the color of this repaint variant.
Click to expand...

Hi Postbaer61,

1. Is your Shader tool available anywhere?

2. I didn't make clear what my other problem is. In Aircraft.cfg, there are 5 [fltsim.x], and only 4 of them show up in P3D's Select Vehicle list. They are the models that represent [fltsims.1, 2, 3, & 4], all of which are Marines aircraft.

[fltsim.0], which is 'title=CV-22B Osprey USAF', does not appear at all in the Select Vehicle list. Its complete entry in Aircraft.cfg is:-

[fltsim.0]
title=CV-22B Osprey USAF
sim=MV-22B
model=
panel=
sound=
texture=
kb_checklists=
kb_reference=
atc_id_color=0xff000000
atc_id=0033
atc_airline=Air Force
atc_flight_number=0033
atc_parking_types=RAMP
ui_manufacturer="Bell-Boeing"
ui_type="cv22b Osprey"
ui_variation="grey"
ui_typerole="Tilt Rotor"
ui_createdby="Maryadi"
description="First operational Tilt Rotor"

- and you can see that there is no entry for 'texture'.

I am wondering if this is correct, or if my Aircraft.cfg has become corrupted?

3. I cannot find any repaints of the CV-22B in other than Marines livery. Do you have any US Air Force repaints available or do you know where I can find any?

Mark
Click to expand...
 
wltaylor said:
Can't get autopilot to work. Manual doesn't seem to help me. Would appreciate any help. When hit the on switch it just beeps. The A/C is outstanding.
Click to expand...


Hi wltaylor,

I have no problems with the auto pilot, it works as it should.
But if you mean the function together with Rob's
refuelling gauge,as far as i know you can't set the Ap manualy,
because the Ap is powered and controlled by this tool.
You only have to set and activate the speed.
 
wltaylor said:
Can't get autopilot to work. Manual doesn't seem to help me. Would appreciate any help. When hit the on switch it just beeps. The A/C is outstanding.
Click to expand...

autopilot prevented by VTOL in VTOL mode. mean make sure nacelles at 0 (Zero) position to make Autopilot work.

Regards, Maryadi
 
Postbaer61 said:
Hi wltaylor,

I have no problems with the auto pilot, it works as it should.
But if you mean the function together with Rob's
refuelling gauge,as far as i know you can't set the Ap manualy,
because the Ap is powered and controlled by this tool.
You only have to set and activate the speed.
Click to expand...

Hi wltaylor,

If you are trying to activate the Autopilot when on the ground, it just beeps (10 times!) and turns off. You have to be actually flying to engage the A/P.

I think this is mentioned in the manual.

Mark
 
Hi Mark,

1. I use reshade : https://reshade.me/ , but i use FSX Acc and not P3D, so i don't know how it works for you.
For P3D user i recommend http://ultimaterealismpack.weebly.com/

2. Your entry is correct, if there is no entry after texture= , it describes the default aircraft texture folder
in this case the ui_variation="grey" USAF ( see in post #256 )
See post # 267 for another USAF repaint. ( i think is still WIP )
 
Sorry for the delay in uploading this one, wifey had a list to do. Found a few minor details to touch up and ill upload this week.

Bill



P.S. PostBaer61, thanks for the link to Reshade,im gonna have to try it
 

Attachments

  • thumbnail.jpg
    thumbnail.jpg
    27.5 KB · Views: 0
wltaylor said:
Can't get autopilot to work. Manual doesn't seem to help me. Would appreciate any help. When hit the on switch it just beeps. The A/C is outstanding.
Click to expand...

From the Manual:

6.1.3 AUTOPILOT. Autopilot functions are disabled at S/VTOL mode.

Meaning that if you set the AutoPilot Master ON while the nacelles are > 0, it will be auto-forced OFF again.
Which is the beeping you hear ...

Note that making a full-fledged AutoPilot as in the real aircraft, while in V(S)TOL configuration, is probably a project on it's own ...LoL
One exception though: if you install my addon (see previous posts), you have a Hover Hold function in VTOL configuration; but that doesn't require the AP Master ON.


Rob
 
No,thank you Kalong for a wonderful model. Thank you Rob for your work on this model. The re painting is pretty strait forward, what you guys do with models etc is amazing. Plus all the people who helped out with mods to their repaints . Sure feels like a cool bunch of people making this a great model.

Bill
 
You must log in or register to reply here.
Back
Top