• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

Cessna 140 released

Thanks Cees, appreciated.

Everyone, there's a new patch gone up to the vendors. Customer feedback suggested we transpose the fuel gauges and air vent positions to reflect the more common position and we've corrected some model issues to improve the floats and a few other things. There's a small adjustment to the aircraft config (contacts) and we've improved the performance curve of the engine a tad. It should be with all the vendors very soon. For those who bought from us, we have the patch up and available. Thanks.:engel016:
 
​I have purchased this beauty but recently got a new MB in my computer but it won't run my flight sims so still grounded.
 
Hi, Id like to ask the other users of C140 and .... antialiasing here (tested in P3Dv4.5 1.0v), especially users P3Dv4.4+ version (textures with PBR).
Maybe this only on my spec and on P3Dv4. :indecisiveness:

I noticed very poor antialising on this model (especially on lines for sure) - on external and internal textures. Whole model "flickers" for me if You change the angle of view. I cant solve it by biggest antialising settings (like 8xSSAA) in P3D but its present still.
Strange because I didn't notice this symptom on my other models. I use 4xSSAA what is very good kind of antialiasing for me for Prepar3D and it's enough for me.

Most visible poor antialising is on Well-used skin:

ZlVGUKf.jpg




I wrote about it in P3D corner http://www.sim-outhouse.com/sohforu...140-released?p=1186350&viewfull=1#post1186350 + I find solution: this repaint didnt use MipMaps.
The difference is a huge as You can see (default texture and the same created by me, please see both parts of the model and lines):

pJdL6WX.jpg


For sure I can make over all textures with MipMaps but if You noticed the same its a bigger problem and it needs to be solved by developer directly.


What did You think? Did You notice the same antialising problem on C140 compared the others?

Here is example with MiPMaps (I did it as example):



As You see line are very good and no antialising problem here.



Btw. I didnt notice the same with other models and models of AH before He-111 (AH changed kind of textures from He-111).

Regards!
 
Concerning the new V 1.2 This is about the FSX version

Once again I downloaded the newest patched version (V 1.2) of the little C140 with great anticipation. Problem......with the new download in the polished skins, the gap for the non existent landing light on the right wing is back. Which in reality doesn't bother me much because the shine on the polished versions are like chrome..........I've fooled with the alpha and that is not the problem........I mean it's a problem for me, because I can't seem to get any good results with the alpha. What is the fuse A texture used for in the FSX modeling??? If anyone can tell me how to dull down the polished skin a bit or if anyone can come up with a realistic aluminum finish and do it with no markings or trim at all, for FSX, I'll be in your debt. Thanks to all who are interested in this. I am delighted with Baz's customer service and in no way and I disappointed with the cute little model. I just have a hard time with gaps in then wing and aluminum finishes I can't really see as realistic. I absolutely go gaga over polished or even, once polished, now dull aluminum and red schemes.

Thanks for reading

Barry
 
Hi Barry,

This first shot is what you should be looking at if you have installed V1.2 correctly. The example HB-CAD is or was owned by Stephane Baillard who kept his aeroplane extremely highly polished. Here's a shot of the real HB-CAD in the Alps and our model also in the virtual Alps. Fiddle away as you will on the polished examples but I can promise you they, and many more examples, do exist like that. We do include a well-worn alloy example as well.

BTW, please use our help desk if you experience problems, it is the fastest way we can get to you. We are not always around here because we're busy working.:engel016:

attachment.php
attachment.php
attachment.php
 

Attachments

  • Cessna140-HBCAD-01-ExpNoF,large.1532624406.jpg
    Cessna140-HBCAD-01-ExpNoF,large.1532624406.jpg
    80.6 KB · Views: 7
  • PolishedCessna.jpg
    PolishedCessna.jpg
    75 KB · Views: 7
  • SwissD.jpg
    SwissD.jpg
    62 KB · Views: 7
Thanks Bazzer, I appreciate your thoughtful answer and I'll use the support route from now on. I am grateful for the effort to produce such a nice model of one of my favorite light planes. Thanks again

Barry
 
Not to everyone's taste. Also, quite a bit of baggage by way of polys and textures to make him realistic enough. He might come back one day if he ever gets out of the pub.:engel016:
 
I posed a question using the "Contact Us" form on AH 's website that hasn't been answered yet, but I'm wondering how many others feel as I do. There are two bodies in the cockpit and a hotspot in the cockpit that "controls the pilots". However all it does is remove "both" or add "both". I asked if it would be possible to allow the removal of just the passenger so that the pilot would remain. Maybe the pilot could be removed as part of the "Secure Aircraft" function.

Anyone else?
 
A couple of places I've been with the Cessna 140. A terrific experience. . .great job AH!

[FONT=&quot]

[/FONT]
[FONT=&quot]


[/FONT]
 
I posed a question using the "Contact Us" form on AH 's website that hasn't been answered yet, but I'm wondering how many others feel as I do. There are two bodies in the cockpit and a hotspot in the cockpit that "controls the pilots". However all it does is remove "both" or add "both". I asked if it would be possible to allow the removal of just the passenger so that the pilot would remain. Maybe the pilot could be removed as part of the "Secure Aircraft" function.

Anyone else?

Yep answered on 30 may to a cableone.net email. Common problem with emails. People contact us then we respond and they cant get them because of anti-spam. Ho hum. I'll add a bold thing to the FAQ on "please check the spam folder ".

In this actual case The email was

Its not a bad idea and as such we are doing it for the socata to come. The issue is that the amount of work and time to remake certain parts of the exterior for this feature is quite considerable. "

There was another bit but I have been told my humour is odd.


:engel016:
 
Yep answered on 30 may to a cableone.net email. Common problem with emails. People contact us then we respond and they cant get them because of anti-spam. Ho hum. I'll add a bold thing to the FAQ on "please check the spam folder ".

In this actual case The email was

Its not a bad idea and as such we are doing it for the socata to come. The issue is that the amount of work and time to remake certain parts of the exterior for this feature is quite considerable. "

There was another bit but I have been told my humour is odd.


:engel016:
Thanks for the answer, unfortunate, but I understand the reasoning I guess. I can tell you, as keen as I was to get an answer to that.. .I've checked every day since it was sent. . .both Inbox and Junk/Spam and it never arrived.
 
A few textures issues

Aeroplane Heaven site photos of the aircraft do not have these issues in pictures posted
purchased at Just Flight all versions down loaded V1.0 for FSX

attachment.php
wings are two different colors... sorry did not check every paint for issues...
gap on right wing is on all aircraft including Floats



The VC has a few issues as well
attachment.php


maybe just flight didn't get final version

She gonna be a keeper! :applause::applause::applause:

Were these VC issues improved?

:wavey:

Cees
 
Barry,

Could you take another look? I have no single VC without a texture flaw...I made some eight screenies and these all show flaws.

Cees
 
It has been fixed and tested Cees. We know exactly what was causing the issue and have corrected it for the update. If you have the update there is no way you should be seeing the issue you show. Trust me. Also, please, as I have said here before, can people please use our help desk for support issues rather than this forum. Thanks.
 


Is it any additional australian skin of C140 for this model in the net? I need it for my new FTX AU v2 :wavey:?
 
Back
Top