Spitfire Mk.II Series Aircraft Set
This package contains a total of 25 Spitfire Mk.IIs. The primary variants represented are:
Spitfire Mk.IIA (Rotol Airscrew) -18 aircraft
Spitfire Mk.IIA(LR) (Rotol Airscrew) -3 aircraft
Spitfire Mk.IIB (De Havilland Airscrew) -4 aircraft
Within these variants are numerous sub variants showing the development of the Mk.II over its frontline career. These include the use of various ammunition types, variants with either fabric- or metal-covered ailerons - each with their own unique handling characteristics, aircraft with and without the Shilling Orifice installed for improved engine performance under negative g forces, and a progression of radio equipment from HF radio, to VHF radio, to VHF radio with IFF antenna.
The paint schemes included cover the Spitfire Mk.II's entire frontline career, from the Battle of Britain through early 1942, representing pilots from Britain, Australia, Belgium, Canada, Czechoslovokia, France, Poland, and the United States.
The package also introduces the CFS3 Real Systems Module. The Real Systems Module allows highly detailed modeling of aircraft systems and cockpit controls for a much more realistic flying experience. New features aircraft systems added by the module include:
-Fully clickable cockpit!
-Fully functional Mk.II Reflector Gunsight with all controls modeled.
-Working radiator shutter with realistic effect upon engine temperatures - including engine failures due to overheating.
-Compressed air emergency undercarriage deployment system.
-More realistic gun and cannon operation, including a gun safety switch, gun jams, and freezing (pilot must use radiator to supply adequate heat to the guns).
-Realistic British-style pneumatic brake system.
-Re-loadable Coffman starter system with five cartridges.
-Realistic engine starting procedure.
-Two-position mixture control.
-Detailed fuel system management.
-Fully modeled pneumatic system which releases pressure with system operation, recharges pressure by an engine driven pump, can be damaged, and causes system failures when pressure gets too low either through use or damage.
-Pilot controlled lighting, including landing lights, navigation lights, and cockpit lighting.
-Realistic bailout procedure (must open canopy first, canopy will not open at high airspeeds, pilot cannot exit the aircraft while experiencing high g-forces or if badly wounded).
-Detailed animations of cockpit controls including numerous new sound effects.
-Support for TrackIR head-tilt for ALL CFS3 aircraft when using the Real Systems Module.
-Many other new features.
-Detailed manuals and checklists to aid you in learning to fly the Spitfire.
It is strongly recommended (though not required) that you install the latest (2019 or later) release of Ankors Shaders before installing this package, as many of the new features of the Real Systems Module, as well as many visual enhancements are only active if the shaders are installed.
Link to October 2019 Release of Ankor's Shaders:
http://www.sim-outhouse.com/sohforum...2_oct_2019.zip
***The following people are responsible for the package***
External CFS3 model original by Josh Zyax (Spitfire mk5) then converted and upgraded to MkII by Stephen (Sdsbolt) Seybolt.
CFS3 VC originally by Pat Didier then upgraded by Clive (Pat Pattle) Moorely then converted to later marks and upgraded by Stephen (Sdsbolt) Seybolt.
All Textures by John (Bravo/4) Whelan.
Mos File by Daniel (Gecko) Holtz. (includes new oil stains, revised bullet holes and blood splatter)
XDP compilation, historical content, plane set construction by Rob (Capt. Winters) Stevenson.
Help files by Rob (Capt. Winters) Stevenson.
Front page History of the Spitfire’s Design and Development. (By Trevor Dean, with information courtesy of Military Magazines UK and the Solent Sky Museum Southampton)
Flight Model based on AvHistory V4.00.164 Spitfire MK XIVc modified to Spitfire Mk.II specification by Daniel (Gecko) Holtz.
Effects (weapons, and damage) by Daniel (Gecko) Holtz. This set has blood splatter and bullet holes for virtual cockpit views and introduces progressive oil leaks over the windscreen and fuselage as damage increases. new weapons to replicate system failures.
Externally run Module files for clickable cockpit and additional game animations by Daniel (Gecko) Holtz and Stephen (Sdsbolt) Seybolt. Includes revised TrakIR compatability which enables full 6 degrees of motion range (adds in head tilting in addition to rotation and elevation).
Weapons and pylons by AvHistory, Stephen (Sdsbolt) Seybolt, Rob (Capt. Winters) Stevenson, Daniel (Gecko) Holtz, with new textures by John (Bravo/4) Whelan.
Revised sounds for 20mm Hispano MkII and .303 mg's for standalone weapons for spitfire MkII model set.
New Engine sounds by Daniel (Gecko) Holtz. Some high-speed propeller sounds by Nigel Richards and used by permission. This set introduces various sounds for compressors and superchargers as well as low rpm rough running sounds.
Guy "fox" Greenburg made the dr_ prefixed effect textures. (Most will have these already from MAW and ETO and RS etc but they have been included for completeness.)
Testing: Brav0/4, Gecko, Capt. Winters, Sdsbolt.
Special Thanks to Ankor for his updates to his DX9 Shaders which support many of the special features included in this package.
Freeware items not to be loaded onto any web site without the written permission of Steve Seybolt.
Use at your own risk.
This package contains a total of 25 Spitfire Mk.IIs. The primary variants represented are:
Spitfire Mk.IIA (Rotol Airscrew) -18 aircraft
Spitfire Mk.IIA(LR) (Rotol Airscrew) -3 aircraft
Spitfire Mk.IIB (De Havilland Airscrew) -4 aircraft
Within these variants are numerous sub variants showing the development of the Mk.II over its frontline career. These include the use of various ammunition types, variants with either fabric- or metal-covered ailerons - each with their own unique handling characteristics, aircraft with and without the Shilling Orifice installed for improved engine performance under negative g forces, and a progression of radio equipment from HF radio, to VHF radio, to VHF radio with IFF antenna.
The paint schemes included cover the Spitfire Mk.II's entire frontline career, from the Battle of Britain through early 1942, representing pilots from Britain, Australia, Belgium, Canada, Czechoslovokia, France, Poland, and the United States.
The package also introduces the CFS3 Real Systems Module. The Real Systems Module allows highly detailed modeling of aircraft systems and cockpit controls for a much more realistic flying experience. New features aircraft systems added by the module include:
-Fully clickable cockpit!
-Fully functional Mk.II Reflector Gunsight with all controls modeled.
-Working radiator shutter with realistic effect upon engine temperatures - including engine failures due to overheating.
-Compressed air emergency undercarriage deployment system.
-More realistic gun and cannon operation, including a gun safety switch, gun jams, and freezing (pilot must use radiator to supply adequate heat to the guns).
-Realistic British-style pneumatic brake system.
-Re-loadable Coffman starter system with five cartridges.
-Realistic engine starting procedure.
-Two-position mixture control.
-Detailed fuel system management.
-Fully modeled pneumatic system which releases pressure with system operation, recharges pressure by an engine driven pump, can be damaged, and causes system failures when pressure gets too low either through use or damage.
-Pilot controlled lighting, including landing lights, navigation lights, and cockpit lighting.
-Realistic bailout procedure (must open canopy first, canopy will not open at high airspeeds, pilot cannot exit the aircraft while experiencing high g-forces or if badly wounded).
-Detailed animations of cockpit controls including numerous new sound effects.
-Support for TrackIR head-tilt for ALL CFS3 aircraft when using the Real Systems Module.
-Many other new features.
-Detailed manuals and checklists to aid you in learning to fly the Spitfire.
It is strongly recommended (though not required) that you install the latest (2019 or later) release of Ankors Shaders before installing this package, as many of the new features of the Real Systems Module, as well as many visual enhancements are only active if the shaders are installed.
Link to October 2019 Release of Ankor's Shaders:
http://www.sim-outhouse.com/sohforum...2_oct_2019.zip
***The following people are responsible for the package***
External CFS3 model original by Josh Zyax (Spitfire mk5) then converted and upgraded to MkII by Stephen (Sdsbolt) Seybolt.
CFS3 VC originally by Pat Didier then upgraded by Clive (Pat Pattle) Moorely then converted to later marks and upgraded by Stephen (Sdsbolt) Seybolt.
All Textures by John (Bravo/4) Whelan.
Mos File by Daniel (Gecko) Holtz. (includes new oil stains, revised bullet holes and blood splatter)
XDP compilation, historical content, plane set construction by Rob (Capt. Winters) Stevenson.
Help files by Rob (Capt. Winters) Stevenson.
Front page History of the Spitfire’s Design and Development. (By Trevor Dean, with information courtesy of Military Magazines UK and the Solent Sky Museum Southampton)
Flight Model based on AvHistory V4.00.164 Spitfire MK XIVc modified to Spitfire Mk.II specification by Daniel (Gecko) Holtz.
Effects (weapons, and damage) by Daniel (Gecko) Holtz. This set has blood splatter and bullet holes for virtual cockpit views and introduces progressive oil leaks over the windscreen and fuselage as damage increases. new weapons to replicate system failures.
Externally run Module files for clickable cockpit and additional game animations by Daniel (Gecko) Holtz and Stephen (Sdsbolt) Seybolt. Includes revised TrakIR compatability which enables full 6 degrees of motion range (adds in head tilting in addition to rotation and elevation).
Weapons and pylons by AvHistory, Stephen (Sdsbolt) Seybolt, Rob (Capt. Winters) Stevenson, Daniel (Gecko) Holtz, with new textures by John (Bravo/4) Whelan.
Revised sounds for 20mm Hispano MkII and .303 mg's for standalone weapons for spitfire MkII model set.
New Engine sounds by Daniel (Gecko) Holtz. Some high-speed propeller sounds by Nigel Richards and used by permission. This set introduces various sounds for compressors and superchargers as well as low rpm rough running sounds.
Guy "fox" Greenburg made the dr_ prefixed effect textures. (Most will have these already from MAW and ETO and RS etc but they have been included for completeness.)
Testing: Brav0/4, Gecko, Capt. Winters, Sdsbolt.
Special Thanks to Ankor for his updates to his DX9 Shaders which support many of the special features included in this package.
Freeware items not to be loaded onto any web site without the written permission of Steve Seybolt.
Use at your own risk.
