-
Please see the most recent updates in the "Where did the .com name go?" thread. Posts number 16 and 17.
-
IMPORTANT DOWNLOADING INFORMATION - ALL MEMBERS PLEASE READ
Please see this thread for updates. Update Thread
SOH ADMINISTRATION
Af lst +af lct ?
- Thread starter ckissling
- Start date
Oglivie
Charter Member
I don't know (never tried it), but if a ship dp file is like an aircraft dp file the LCT maybe added to the LST's dp file like pilots, drop tanks and weapons are for aircraft.
These sections are what you may need in the LST's dp file to test the theory:
[HARDPOINTS]
mount.0=0,0.72,0.52 //lateral,vertical,longitudinal (meters)
[PAYLOAD.0]
; Payload = LCT
mount.0=AF_LCT, 1, 1 //need correct LCT folder name, here I used AF_LCT as sample.
Hardpoint mount.0 locations would have to be adjusted for correct location.
These sections are what you may need in the LST's dp file to test the theory:
[HARDPOINTS]
mount.0=0,0.72,0.52 //lateral,vertical,longitudinal (meters)
[PAYLOAD.0]
; Payload = LCT
mount.0=AF_LCT, 1, 1 //need correct LCT folder name, here I used AF_LCT as sample.
Hardpoint mount.0 locations would have to be adjusted for correct location.
Well, I can add a boat to an aircraft dp, but I did not seem to be having any success adding one to a ship dp.
Remember this one? http://www.sim-outhouse.com/sohforums/showthread.php?t=20550
Ck, you might wanna make a [platform] in the ships cfg file, then alter the ships.dp Misc entry to make it a carrier. You can then load practically anything onto the platform and drive it off.
regards Collin:ernae:
Oglivie
Charter Member
Jagdflieger
Jr. Admin
Platforms
Here is the data for the AF LST to make it usable with a helicopter. Ought to work with your LCIs.
DP File:
[MISC_DATA]
unit_family=7
category=13
allegiance=1
min_speed=0
cruise_speed=20
max_speed=25
entered_service=12/1/41
Ship.cfg file:
[platform.0]
; Flight Deck
vertex.0=10.5149904,6.0,-103.6484592
vertex.1=-10.2114096,6.0,-103.6484592
vertex.2=-12.1014744,6.0,-99.7165392
vertex.3=-12.4672344,6.0,-88.7132592
vertex.4=-12.4672344,6.0,-48.7234992
vertex.5=-12.4672344,6.0,36.0109008
vertex.6=-11.7661944,6.0,50.4279408
vertex.7=-11.0651544,6.0,77.9513808
vertex.8=-9.6630744,6.0,91.4845008
vertex.9=-8.8401144,6.0,96.1784208
vertex.10=-6.4626744,6.0,105.7186608
vertex.11=6.4626744,6.0,105.7186608
vertex.12=8.8078056,6.0,96.1784208
vertex.13=9.4478856,6.0,91.4845008
vertex.14=10.9414056,6.0,77.9513808
vertex.15=11.7034056,6.0,50.4279408
vertex.16=12.4654056,6.0,36.0109008
vertex.17=12.4654056,6.0,-48.7234992
vertex.18=12.4654056,6.0,-88.7132592
vertex.19=12.0996456,6.0,-99.7165392
Baldy came up with this data for use with his helicopters.
Here is the data for the AF LST to make it usable with a helicopter. Ought to work with your LCIs.
DP File:
[MISC_DATA]
unit_family=7
category=13
allegiance=1
min_speed=0
cruise_speed=20
max_speed=25
entered_service=12/1/41
Ship.cfg file:
[platform.0]
; Flight Deck
vertex.0=10.5149904,6.0,-103.6484592
vertex.1=-10.2114096,6.0,-103.6484592
vertex.2=-12.1014744,6.0,-99.7165392
vertex.3=-12.4672344,6.0,-88.7132592
vertex.4=-12.4672344,6.0,-48.7234992
vertex.5=-12.4672344,6.0,36.0109008
vertex.6=-11.7661944,6.0,50.4279408
vertex.7=-11.0651544,6.0,77.9513808
vertex.8=-9.6630744,6.0,91.4845008
vertex.9=-8.8401144,6.0,96.1784208
vertex.10=-6.4626744,6.0,105.7186608
vertex.11=6.4626744,6.0,105.7186608
vertex.12=8.8078056,6.0,96.1784208
vertex.13=9.4478856,6.0,91.4845008
vertex.14=10.9414056,6.0,77.9513808
vertex.15=11.7034056,6.0,50.4279408
vertex.16=12.4654056,6.0,36.0109008
vertex.17=12.4654056,6.0,-48.7234992
vertex.18=12.4654056,6.0,-88.7132592
vertex.19=12.0996456,6.0,-99.7165392
Baldy came up with this data for use with his helicopters.