ATSimulations Cri-Cri Update released

Gonna do some checking, but I don't see any difference, especially where the flap animation is concerned. From the VC view the left flap drops the right remains stationary, just as it did in the original release, so unless Simmarket got the wrong upload, that problem still hasn't been fixed.

The installer says this is V1.01 as does the original installer dated 9/7/2017:dizzy: ATS is looking into it. Looks like the Store upload for purchase has been updated, however my Account Download has not. . .at least not yet.

If you have FB and have the ATSimulation Site available, let Andrey know if you were able to download a V1.03 or if yours is also still 1.01. He's in touch with Simmarket trying to get it resolved.
 
I don't know if an uninstall is required but when I try, I am told that "I do not have sufficient access" to use the uninstaller? UAC is off.
 
Roger said:
I don't know if an uninstall is required but when I try, I am told that "I do not have sufficient access" to use the uninstaller? UAC is off.
Click to expand...
There is another uninstaller in the "Roaming\ATSimulations" sub-folder. Use that uninstaller and it will work. I had the same problem and that's how I got it to uninstall. Not sure why that one works and the other doesn't though.
 
Here are a few shots of this very well designed airplane. . .the Cri-Cri (Cricket). The update has corrected the flap animation problem when viewed in the VC, but then some additional "extras" were added, like a flashlight that illuminates the panel and a tent that automatically sets up with a single click once you've landed and need a place to get some shuteye, lol:

Cri-Cri-VC.jpg

Nicely modeled VC

Cri-Cri-Flashlight.jpg

Flashlight shows when you click on the holding bracket click again to turn it on/off

Cri-Cri-Tent.jpg

Tent is stored behind the seat. Cut the engine, set the brakes and click on the tent behind the seat. The tent will automatically set up with the pilot asleep in his sleeping bag.
Nicely done Andrey and thanks for the update.
 
I have taken my Cri-Cri into the hangar to do some updates of my own, such as: an Autopilot, Nav and Beacon Lights and a landing light. Along with the nifty flashlight, I'm enjoying some night flying as well now.
 
Hi Ed.
Yes I have done an autopilot etc but would like a copy of the lights if you are prepared to let me have it.

Cheers Chris
 
speedy70 said:
Hi Ed.
Yes I have done an autopilot etc but would like a copy of the lights if you are prepared to let me have it.
Cheers Chris
Click to expand...
Chris, currently I am using the Shockwave Lights which are way too bright for such a small airplane. I'm going to swap those out for the default effects which will probably mean some adjustments to the positioning. Once I get that complete I'll post the light section here. . .probably later this evening. I also did a set of switches on a pop-up to handle each one of the lights, plus a Nav/GPS switch.
 
Here are the numbers for the lights. . .I couldn't find a default landing light to suit me so that one remains a shockwave effect. If you can find one you like it's easy enough to change though:

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing,
light.1 = 1, -8.250, 0.000, 2.570, fx_beacon
light.2 = 3, -.00, 8.00, 0.10, fx_navgre
light.3 = 3, -.00, -8.00, 0.10, fx_navred
light.4 = 5, 5.30, 0.00, 0.15, fx_shockwave_landing_light_narrow

I was going to add a VC light as well, but the flashlight was just too cool to mess with.
 
You must log in or register to reply here.
Back
Top