FS Global Ultimate - Asia, Oceania

blanston12

blanston12

SOH-CM-2024
Has anybody used FS Global Ultimate - Asia, Oceania?
Does it work with P3D V4?
Is it worth the money?
Is it compatible with FTX Global.

Thanks in advance.
 
blanston12 said:
Has anybody used FS Global Ultimate - Asia, Oceania?
Does it work with P3D V4?
Is it worth the money?
Is it compatible with FTX Global.

Thanks in advance.
Click to expand...

I have installed and it makes a huge difference, however they have just released ultimate 2018, which im upgrading to tonight all 66gb download worth

And yes it compatible FTX, if you keep you their airports you are restricted to 10ms for most of them otherwise you will get floating houses
 
Last edited:
After reading I am not clear as to the difference betweem "FSGlobal Ultimate-Next Gen FTX" and "FS Global 2018 FTX."

Both sound like they should be completely compatible with Orbx and what is the Mesh size difference between them ?
 
I really wish ORBX would release Global Vector for V4, since I already own it, but will probably be flying into this region before its available so an alternative is in order. I have to admit toposim eastern hemisphere looks very interesting. IF FSGlobal is the basis for global vector I may just wait for global vector.

Thanks all.
 
greenie said:
After reading I am not clear as to the difference betweem "FSGlobal Ultimate-Next Gen FTX" and "FS Global 2018 FTX."

Both sound like they should be completely compatible with Orbx and what is the Mesh size difference between them ?
Click to expand...

from my understanding,2018 range are the newer version of the ultimate NG and ftx global, (maybe just a rename and package) next gen is definitely a new version of the mesh

the normal ftx global mesh is the lower mesh res while the ultimate is the higher res mesh, which is more suited for V4

people with pre v4 suffered OOMs if they increased their mesh res too much

ultimate claims you can set it at 1m and will have 1m res (in some regions)

anyway in short, if you set ultimate at less than 10m you will definitely see the difference, if you set the normal one at less than 10 you may not see any difference at however its more detailed than stock mesh

does that make sense?
 
Thank you Jeansy , makes sense- I think !

Never realised people had OOMs from mesh.

I happen to own a 4yr old copy of FS Global Ultimate mesh and wondering if the difference between that and the 2018 range is worth the money ( a bit subjective, I know) . I wonder about the visual difference in the hills and mountain ranges.

Always looking for improved visuals.

Cheers
Alan
 
blanston12 said:
Has anybody used FS Global Ultimate - Asia, Oceania?
Does it work with P3D V4?
Is it worth the money?
Is it compatible with FTX Global.

Thanks in advance.
Click to expand...


Actually , I might just go ahead and install my copy into the sim and see what happens , probably tomorrow .

Thanks for starting the thread , I forgot about the mesh being so wrapped up in V4 and really enjoying the flying ( with PTA and AS16)
 
greenie said:
Thank you Jeansy , makes sense- I think !

Never realised people had OOMs from mesh.

I happen to own a 4yr old copy of FS Global Ultimate mesh and wondering if the difference between that and the 2018 range is worth the money ( a bit subjective, I know) . I wonder about the visual difference in the hills and mountain ranges.

Always looking for improved visuals.

Cheers
Alan
Click to expand...

phew i re read it & i confused myself

however when i finish downloading the new ultimate I will let you know, Im hoping that im not re purchasing the same thing I already have with a new name , as I all the ultimate regions installed


btw, SE Asia comes alive with ultimate, the Philippines and volcanic region of Java is incredible compared to plain pilots global 2010
 
No success here in installing FSGU . Loaded up the 5 dvd's and at the very last operation of installation ( tying all the dvd's up and activating I guess ) a window popped up " executing action 64 failed" or words to that effect.

I noticed FSGU is not supported in V4 and it seems their support not the best anyway , from what I have read.

No free updates here. Can't win them all

I will give it another try
 
greenie said:
No success here in installing FSGU . Loaded up the 5 dvd's and at the very last operation of installation ( tying all the dvd's up and activating I guess ) a window popped up " executing action 64 failed" or words to that effect.

I noticed FSGU is not supported in V4 and it seems their support not the best anyway , from what I have read.

No free updates here. Can't win them all

I will give it another try
Click to expand...

Isn't this a mesh product? If so, it is just scenery blg files. Load it in to V3 or FSX and then just point to the root folder with the scenery library in PD3 V4 or use one of the scenery cfg programs floating around. The 64 bit PD3 doesn't care where it is or if it was designed for a 32 bit program.
 
greenie said:
No success here in installing FSGU . Loaded up the 5 dvd's and at the very last operation of installation ( tying all the dvd's up and activating I guess ) a window popped up " executing action 64 failed" or words to that effect.

I noticed FSGU is not supported in V4 and it seems their support not the best anyway , from what I have read.

No free updates here. Can't win them all

I will give it another try
Click to expand...

I used 7zip to open the dvd files then copied and pasted the bgls into the folder of choice

Sorry i forgot to mention the installers dont support v4
 
Tonight before i install next gen i will post some screen shots of ulitmate and then some of next gen
 
jmig said:
Isn't this a mesh product? If so, it is just scenery blg files. Load it in to V3 or FSX and then just point to the root folder with the scenery library in PD3 V4 or use one of the scenery cfg programs floating around. The 64 bit PD3 doesn't care where it is or if it was designed for a 32 bit program.
Click to expand...

Thanks jmig
I don't have FSX or V3 installed - ditched everything for v4- but I do have a fsx.exe somewhere on backup. I guess I can do a bit of trickery .

Before that though I'll wait for Jeansy's results then decide if I want to upgrade or not .
 
jmig said:
Isn't this a mesh product? If so, it is just scenery blg files. Load it in to V3 or FSX and then just point to the root folder with the scenery library in PD3 V4 or use one of the scenery cfg programs floating around. The 64 bit PD3 doesn't care where it is or if it was designed for a 32 bit program.
Click to expand...

I did exactly the same with FreemeshX. I had it installed for v3. Then in v4 I just pointed to the same folders and it worked right away. Nothing 64bit about mesh. Btw, I'm really happy with FreemeshX and you can not beat the price.

http://ninetwopro.com/
 
Dimus said:
I did exactly the same with FreemeshX. I had it installed for v3. Then in v4 I just pointed to the same folders and it worked right away. Nothing 64bit about mesh. Btw, I'm really happy with FreemeshX and you can not beat the price.

http://ninetwopro.com/
Click to expand...

Nice price but apparently a 38m mesh . The latest FSglobal offerings seem to be somewhere between 1m and 10m, worth paying for imo .
 
I dont think I will be able to do both lots of shots tonight i will do the older version of Ultimate Asia/Oceanic then once installed I will do the comparison

Next gen looks like its going to take a while to install and I need to remove the older ultimate regions to make room on the HD

when i started doing some shots the funnest thing i dont see much difference in that location the Philippines , so im looking like a bit of a real dick here im going to have to go thru my install and see if I have any other installs as i was throwing everything into v4 to see work,

so im going to wipe my scenery.cfg and only add to for the purpose of the images so please bare with me

so to make things easier is there any particular region you are interested in (Airport ID would be great )
 
Sounds a bit tedious please dont do it on my account although I know you have to go this way.

You feel like a dick, how about me !. I just installed FSGlobal Ultimate , bought in feb 2013, into V4

At the beginning you get a choice at pointing it towards P3D or fsx . First time around I selected P3d and it failed .

I forgot and happen to have the migration tool . So second time I selected fsx and she loaded up on a different drive I picked . Right at the end I had another failure but I could see the .bgl files sitting there . So via scenery library we're home and hosed !

I am still interested to hear how you feel about Next G . Not interested in a specific area but I fly only in Orbx regions so maybe give us your thoughts after using it for a while

Cheers and thanks for your time ...Alan
 
so to make things easier is there any particular region you are interested in (Airport ID would be great )[/QUOTE]


On second thoughts ..
I guess a general of European Alps or Alaska - that sort of thing but there is a little airport that I go to for training or messing about I enjoy and thats Corryong, Victoria, Oz - YCRG . Up in the high country. :)
 
I Decided to give TopoSim a try. There was one island I wanted to fly around in far eastern Russia where the coast line was very different between my V3 with FTX Global vector and V4. Toposim made the terrain look much better but did not change the coast line, and the little airport I was creating with Airport Design Editor is now down in a canyon. There is a wide flat plane between where the coast line should be and where V4 thinks it should be.
 
You must log in or register to reply here.
Back
Top