• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

Milton's SOH Team Grummans Released

LOL Tom ... I promise. :)

Here are some handy links:

DOWNLOAD LINKS:

S2F-3: http://www.sim-outhouse.com/sohforums/local_links.php?catid=6&linkid=5308

S2F-3 Optional Flight Model Update to make Pitch Adjustments less Sensitive or Coarse:
http://www.sim-outhouse.com/sohforums/local_links.php?catid=6&linkid=5325

E-1B: http://www.sim-outhouse.com/sohforums/local_links.php?catid=6&linkid=5309

C-1A: http://www.sim-outhouse.com/sohforums/local_links.php?catid=6&linkid=5318

S2A-CDF and S2AL-CDF: http://www.sim-outhouse.com/sohforums/local_links.php?catid=6&linkid=5319

S2T-CDF: WIP
S2T-Mil: WIP


PAINT KITS

E-1B Paint Kit: http://www.flightsimonline.com/Grumman/E-1B-PaintKit.zip

C-1A Paint Kit: http://www.flightsimonline.com/Grumman/soh-c1a-paintkit.zip

S2F-3 Paint Kit: http://www.flightsimonline.com/Grumman/s2f-3_paintkit.zip
 
Very nice Grumman C1A, it handles beautifully. Nice looking out the left at that big radial pulling along at a very nice clip. Going to have to try out that Tracker.

Thanks for such a nice Grumman. You guys did a very fine job on this one.

P.S. - Very well done animation of the crew too, they look like they are communicating with each other as well as observing. Looks natural and very real.

And - Those engine sounds are GREAT Nigel!
 
I love 'em. :applause: They're all I've flown since they were released!

Did want to point one small thing, if I might...

During the time of the blue paint scheme, the C-1A was still called the TF-1. Also, VF-24 was out of Port Lyautey (transferred from RAF Hendon in 1950) and detached to Naples when the TF-1's started coming in during 1955; NAS Sigonella wasn't opened until 1959.

No flaming intended (God knows there's enough of THAT going on in flight sim these days!) -- just a respectful correction.

Marc
 
I have been inovolved with this one for some time, but of the many outstanding items in the kit, Nigels sound set really helps give a feel of the aircraft.

T
 
Yeah! Once you've gotten out of the startup smoke (boy, does it smoke) there's a great little aural surprise as the engine beat settles into the warmed-up note.
Nice touch, Nigel.
 
fliger747 said:
I have been inovolved with this one for some time, but of the many outstanding items in the kit, Nigels sound set really helps give a feel of the aircraft.

T
Click to expand...

Tom,

I am very happy that you have pulled us through on the many flight models for both FSX and FS9. Doing both is yeomen's duty, but doing both for 5 aircraft is dedication beyond the call of duty. All the reports back have praised these flight models. Thank you so much! :applause: :medals:

Nigel's sounds are just different, and really do give you that sense of "settling in". The changes in th eprop and engines sounds through the flight envelop are very impressive. :applause::medals:

Then cap that off with the awesome textures on all the aircraft and you have a very sweet package. Thanks to mgr, johnh_049, Snurdley, Duckie, and tankerguy72, and Matt for kicking it all off only to be side-tracked with computer issues. :applause::medals:

Thanks to Scott Thomas for the panel and gauge setup ... lots of tedious work in building all the textures, gauges, bmps, and code for the 5 panel areas plus the 2D cockpit and popups.
:applause::medals:

And guess what, there is more to come for the S2Turbine variants from tankerguy72, Lazerbeak, and ferondoe, plus Nigel's all new sound set for those engines. :wiggle: Hang on for a few more weeks on these.

Thanks everyone for your support and and help to get this project in "Gold status".
 
Wing_Z said:
Yeah! Once you've gotten out of the startup smoke (boy, does it smoke) there's a great little aural surprise as the engine beat settles into the warmed-up note.
Nice touch, Nigel.
Click to expand...

I love that start up smoke! It's just right in getting those cold engines warmed up after sitting with so much oil seeped past the rings. Takes a bit to burn off the oil and get some heat into those monsters.

What is really fun to do and watch is crank up the left engine using the VC starter switch and cycle quickly to front quarter spot view and watch and wait while that engine gets warmed up and settle down to idle, ....then jump back into the VC to hit the right engine switch and jump back out and watch standing by with the fire bottles. That is so cool!
 
Yes, very cool indeed. Nigel did the extra smoke thing for us. That man can do anything I believe. :)

I wanted to add the slow cranking engine effect that we used for the A26B Invader, and did, but took it out once Nigel had the excellent cranking sounds ready. It's just a shame we can't have the slow cranking and the excellent sounds for startup.

Also, if I recall correctly, parts of that would not work in FSX.
 
well having just discharged myself from hospital (Had a minor meniscopy yesterday at around 1500GMT, still got 90% or so of meniscus:icon_lol:) it's time for me to break out the spray guns and do an 'Outhouse Scheme'

to all the team.... well done, beers on me :ernae:
 
Milton Shupe said:
Yes, very cool indeed. Nigel did the extra smoke thing for us. That man can do anything I believe. :)

I wanted to add the slow cranking engine effect that we used for the A26B Invader, and did, but took it out once Nigel had the excellent cranking sounds ready. It's just a shame we can't have the slow cranking and the excellent sounds for startup.

Also, if I recall correctly, parts of that would not work in FSX.
Click to expand...

If you change the normalized starter torque to = 0.020 the engine will turn over a couple times before firing. And changing propeller moi to = 42.0 makes the prop stop at the same time as the shut down sound. Just makes it look a little more realistic for what it's worth.
 
Terry said:
If you change the normalized starter torque to = 0.020 the engine will turn over a couple times before firing. And changing propeller moi to = 42.0 makes the prop stop at the same time as the shut down sound. Just makes it look a little more realistic for what it's worth.
Click to expand...

I've adjusted those values on several recip's to get better start up and shut down visuals. With starter torque you just need enough to spin the engine to 500 rpm in order to get it fired up in MS FlightSims.
 
Try the startup effect on the F7F, it looks much better as the smoke is blown back rather than slowly drifting back.
 
No Screens in this Thread!

Soon fix that... that hinge is a work of art, eh?

SOHGrummansS2F3.jpg


Thank you Duckie, very nicely done

SOHGrummansfs92012-02-2513-20-51-18.jpg


And it flies very well, thanks Mr. Fliger sir.

SOHGrummansfs92012-02-2513-16-35-89.jpg
 
Good evening Milton's team,
I can't tell you how grateful I am as the Tracker is one of my favourite aircraft of all time!!! Fantastic 3D model and panel, FPS friendly, stunning sounds and flight model... nothing's missing on this award winner!!!
What could I ask for? Well... if I could I would ask for a Netherlands Navy repaint (as I don't know how to do it myself unfortunately!) to suit the superb R81 "Karel Doorman" aircraft carrier which comes with wonderful animations (working meatball, marshallers...) and available at avsim.com (file: [FONT=verdana, sans-serif][FONT=verdana, sans-serif]r81r8-v10.zip)[/FONT][/FONT]... BTW this ship was created by someone I think you know: Marcel Ritzema!
Many thanks again to you all, best regards,

Stéphane.
 
You must log in or register to reply here.
Back
Top