Oh no!!!

NachtPiloten

NachtPiloten

Kurier auf Stube...pauke!
Staff member
My external backup HD just stopped- It took with it everything I have.........:pop4: So hopefully I can find someone to recover the data if not it has been a great ride all these years.
 
NachtPiloten said:
My external backup HD just stopped- It took with it everything I have.........:pop4: So hopefully I can find someone to recover the data if not it has been a great ride all these years.
Click to expand...

I have had this happen to two external hard drives over the years. In both cases I removed the hard drive from the case and installed it in the desk top computer as the second or third hard drive, which ever fits your set up. I have been lucky, all of the information was still on the hard drives and not harmed in any way. In my case the problem was not the hard drive but the interface built into the external drive case.
External drive cases Without the drives, are available at very reasonable prices from Fry's, Newegg and many other places,for both notebook and desk top hard drives. Before I spent big bucks to have an expert recover the folders and files I would try the above. Good Luck!!!
Chuck
 
I agree with Chuck68, I've also had two external HDD failures, both were traced to failures of the connectors in the external case. It's certainly worth a shot at trying it in the desktop. If the HDD is toast, it won't hurt anything.
 
Agree with the last 2 posters. Just because the drive does not spin up doesn't mean it's bad.

Simply disconnect it from the motherboard for an hour, you might even remove it.

Then reconnect it it and try again. I have had 7-8 units do the same thing when I was managing 130 computers in a network.
They all started working again usually within 30 minutes of hauling them to my office.

If you get it working, do a backup to an external or other physical drive periodically.
 
Hopefully it is just a problem with the external case.

There are a number of desperation moves that can be attempted- only when your last step is to use the HD as a paperweight-
These can be fully researched on Google so not going to go step by step.

Two that have worked for me:

Put the drive in the freezer. This has worked twice for me out of maybe 5 tries. Drive only works for a short time so know ahead of time what the most important files to grab are.
You may be able to repeat the process, one pass was all I ever got.

Rapidly power cycle the HD on and off. This is easier to do with an external enclosure (and does not stress the rest of your PC). I've done this with a number of internal hard drives (work computers) and probably about 40% success rate.
Again this "shocking" the drive will likely only work for a short time.

Make sure whatever you hope to move the data to is connected and ready to transfer.
 
That's a case of "Oh No!!" indeed!

When you say "backup", does that mean there 's still a working copy around on your internal HD? [he asked hopefully].
A bit late to close the barn door but I always try to keep at least two copies of my files on separate disks; my working copy on my internal HD and a daily (automated) backup on an external HD. If not, I can only say we 've all been there at one time or another and offer you (and the community) my sincere condolances with a major loss of CFS3 wealth (but I still keep my fingers crossed!).

PS. Don't forget gmax' Autobak function. If used, you 'll have at least a version of the latest project you were working on... (unless that is saved to the unlucky HD too...)
 
Bad news Ted, hope you can get it back again.

PS. Don't forget gmax' Autobak function. If used, you 'll have at least a version of the latest project you were working on... (unless that is saved to the unlucky HD too...)
Click to expand...

Good idea Joost, if I remember rightly Gmax stores the BAK files in the main programme folder, may be worth a look.
 
I was having trouble with a new SSD dropping dead. It turned out to be a bad SATA cable.

When my external hard drive stopped working it was just a bad power connection.

Sometimes it pays to be lucky.
 
Terrible news from one of our best modelers. I hope all is not lost . Been through a major crash and don't want it repeated again. Now i have backups of backups.
 
Hi Nachtpiloten, I really hope you can recover your incredible number of hours' hard work from your HDD.

Wayland said:
I agree with Chuck68, I've also had two external HDD failures, both were traced to failures of the connectors in the external case. It's certainly worth a shot at trying it in the desktop. If the HDD is toast, it won't hurt anything.
Click to expand...

I had the same experience with an external HDD. When I opened it up, to my surprise it was just a plastic case with some bodgy connecters to an internal HDD. So I was able to connect it via a SATA lead direct to the motherboard, and so instead of an external HDD, I've had an internal 1Tb HDD ever since.....

I'm really hoping your HDD problem is easily fixed.
 
Hope all is well and your data was recovered. Sad news if not. You are one of the best out there and it's a huge loss for all of us that use your great work. You are much appreciated here at SOH.
 
Update

Thanks for the kind words and advice. Have a new 2tb external and was able to transfer the contents of the older drive:jump:
 
WOOHOOO! I'm sure our excitement pales in comparison to your own though. Glad your work is safe.
 
You must log in or register to reply here.
Back
Top