Redux lights for Duke?

[Wing Nut]

Anyone have the coordinates for Redux lights for the RealAir Duke? They dont seem to be in the data base.

 

[gajit]

Hi

I have only worked on the landing and taxi lights - this is the best I have got at the moment.


Put this in the panel config in the [VCockpit01]
gauge13=shockwave_lights!SW Lights_gear, 1,1,1,1 //shockwave light

Put these in your Aircraft config - add after/below the existing in the [LIGHTS]
light.10 = 5, 2.50, -0.5, -2.0, Fx_shockwave_landing_light // Shockwave light
light.11 = 5, -6.4, 4.8, -1.5, Fx_shockwave_landing_light // Shockwave light
light.12 = 5, -6.4, -4.8, -1.5, Fx_shockwave_landing_light // Shockwave light

This is Ok but someone might be able to work out why in some angles you dont see all the lights - I tried other lights as options but they did not appear at all.

To make the front light go off when the gear is retracted i had to call it a Landing - not a taxi light.

Cheers

 

[Wing Nut]

Thanks gajit.

 

[gajit]

Hi Wing Nut

I see this topic has now developed - I have not tried the additional tweaks.

http://a2asimulations.com/forum/viewtopic.php?f=32&t=14620

 

[Tako_Kichi]

You are welcome to try my settings for the A2A lights.....

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=Taxi, 7=Recognition, 8=wing, 9=logo, 10=cabin
light.0 = 3, -6.40, -19.70, 1.01, fx_shockwave_navred
light.1 = 3, -6.40, 19.70, 1.01, fx_shockwave_navgre
light.2 = 3, -26.50, 0.00, 2.20, RASDuke_NavWh
light.3 = 2, -6.20, -19.66, 1.01, fx_shockwave_strobe
light.4 = 2, -6.20, 19.66, 1.01, fx_shockwave_strobe_2
light.5 = 1, -27.68, -0.01, 8.70, fx_shockwave_beaconh_l
light.6 = 7, -7.42, 1.944, -1.49, fx_shockwave_beaconb_nl
light.7 = 10, -7.80, 0.00, 1.50, RASDuke_vclight
light.8 = 8, -6.20, -13.20, 1.03, RASDuke_wing //de-icing Boots left wing
light.9 = 8, -6.20, 13.20, 1.03, RASDuke_wing //de-icing boots right wing
light.10 = 6, 1.25, -0.27, -1.85, fx_shockwave_landing_light_narrow
light.11 = 5, -7.20, 4.85, -1.40, fx_shockwave_landing_light_narrow
light.12 = 5, -7.20, -4.85, -1.40, fx_shockwave_landing_light_narrow
​

To make the lights go out when the gear is raised you need to add the following lines to the end of the [VCockpit01] section of the panel.cfg file.....

gauge13=shockwave_lights!SW Lights_taxi_gear, 1,1,1,1 //shockwave light
gauge14=shockwave_lights!SW Lights_gear, 1,1,1,1 //shockwave light
​