• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

Sceney Issues

S

Steven KLein

Members +
On one of my Installs, when I go to Free Flight, half the objects are in the water on Bases near the shorelines but other objects are not and the other issue is when I select a base and try to load the Scenery, I get a CTD. This happens though only maybe 2% of the time. For the most part when I go to FF or QC, it doesn't happen at all and the scenery where it does happen is Add-On, not stock. I tried rearranging the Scenery in the Library, but that doesn't seem to work. Any ideas on the cause of the above and how to fix it would be appreciated.:confused::confused:
 
So little info on which to go on :dejection:

Are you using stock mesh or Rhumbas new world mesh?
Any watermasks in use? Are these new or old?
Does the CTD happen at the same base - which base?

Waterlogged bases - sounds like you're using Rhumbas new watermasks with a scenery package that is much older - as such the scenery will work best with a stock install.

CTD - I've had occasional issues with older add-on bases under WIN 7 when these same bases loaded fine when created (under WIN XP) - it might be the scenery bgls need to be refined, maybe XP was more forgiving than later OS for elevation issues, misaligned or "unsquare" background bitmaps. But unless we know which base, we'll never fix it.
More likely is it's just one of CFS 2's occasional hissy fits :p87: , it never did like too many things being changed/added between flights :pop4:
 
Scenery Issues

UncleTgt said:
So little info on which to go on :dejection:

Are you using stock mesh or Rhumbas new world mesh?
Any watermasks in use? Are these new or old?
Does the CTD happen at the same base - which base?

Waterlogged bases - sounds like you're using Rhumbas new watermasks with a scenery package that is much older - as such the scenery will work best with a stock install.

CTD - I've had occasional issues with older add-on bases under WIN 7 when these same bases loaded fine when created (under WIN XP) - it might be the scenery bgls need to be refined, maybe XP was more forgiving than later OS for elevation issues, misaligned or "unsquare" background bitmaps. But unless we know which base, we'll never fix it.
More likely is it's just one of CFS 2's occasional hissy fits :p87: , it never did like too many things being changed/added between flights :pop4:
Click to expand...

I am using Rhumbas mesh, but not his new watermasks and I think I am using some newer masks in the install. I'll check on that. The Scenery in question is from your Marshalls Scenery on Kwajalein and another Base from that Scenery. The CTD is from MR Papua New Guinea Borbase Island but on two of other installs this Scenery loaded fine. Thanks for replying to me about my problem. It should help me to try and fix it on my own. I let you know what happens. My OS is Win8.1 for you info.
 
You could also....

Yo Steven:

You could also:

Open the main CFS2 folder
Locate the file: ERROR.log
Open it with Notepad
Read the reason for the crash.

This is the easiest way to locate most problems.

I hope this it is of some help.
 
Scenery Issues

Steven KLein said:
I am using Rhumbas mesh, but not his new watermasks and I think I am using some newer masks in the install. I'll check on that. The Scenery in question is from your Marshalls Scenery on Kwajalein and another Base from that Scenery. The CTD is from MR Papua New Guinea Borbase Island but on two of other installs this Scenery loaded fine. Thanks for replying to me about my problem. It should help me to try and fix it on my own. I let you know what happens. My OS is Win8.1 for you info.
Click to expand...

Still get Objects in the Water in the Kwajalein and Eniwitok Islands Bases. Nothing I do seems to fix it. As of now, I just won't use those 2 bases for anything.
 
Sounds like a watermask hierarchy issue, or you're using a PTO watermask layer when you don't need to (my 2020 Marshalls came complete with all the watermaskes & scenery excludes you need, so no need to have any other watermasks active).
 
Scenery Issues

UncleTgt said:
Sounds like a watermask hierarchy issue, or you're using a PTO watermask layer when you don't need to (my 2020 Marshalls came complete with all the watermaskes & scenery excludes you need, so no need to have any other watermasks active).
Click to expand...

I did some checking since I originally posted my problem. I am using Rhumba Mesh Set LOD 5,7 and 8 and as far as I can tell, no Watermasks at all, either old or newer in the Install where I have some of the Infrastructure in the water . Also, I have not yet Installed the GSL Scenery in this Install. Your scenery looks great, I wish that part of it would'nt be waterlogged. Could something else in my Install be causing a problem with the Coastlines? I still have the Stock Scenery for Kwajelain Airbase in the Install and when I go the Base on Free Flight my Plane is not on the Runway but gets placed in the Air over the Base. Hope the above gives you more information about my problem. Thanks.
 
Steven KLein said:
I did some checking since I originally posted my problem. I am using Rhumba Mesh Set LOD 5,7 and 8 and as far as I can tell, no Watermasks at all, either old or newer in the Install where I have some of the Infrastructure in the water . Also, I have not yet Installed the GSL Scenery in this Install. Your scenery looks great, I wish that part of it would'nt be waterlogged. Could something else in my Install be causing a problem with the Coastlines? I still have the Stock Scenery for Kwajelain Airbase in the Install and when I go the Base on Free Flight my Plane is not on the Runway but gets placed in the Air over the Base. Hope the above gives you more information about my problem. Thanks.
Click to expand...

I just Kwajelain scenery last week with no problems.

You issue with the objects in the water is because you didn't put in the GSL scenery yet.When you do that they will replace the other objects and be put in the right area.Remember the new scenery has been relocated and the old objects are not.

Since you still have stock Kwajelain scenery installed this causes the plane to be in the air and not at base.

If you did everything according to the readme everything should be in place.I think you may have missed something,so recheck everything.

TheBookie
 
Scenery Issues

TheBookie said:
I just Kwajelain scenery last week with no problems.

You issue with the objects in the water is because you didn't put in the GSL scenery yet.When you do that they will replace the other objects and be put in the right area.Remember the new scenery has been relocated and the old objects are not.

Since you still have stock Kwajelain scenery installed this causes the plane to be in the air and not at base.

If you did everything according to the readme everything should be in place.I think you may have missed something,so recheck everything.

TheBookie
Click to expand...

Adding the GSL Scenery did the trick. Thanks so Much! I'll still use the Older Scenery for Free Flight over the Airbases.
 
You must log in or register to reply here.
Back
Top