The Alps, The Storch and underground runways.

M

monk1

Charter Member
I'm trying to do some winter flying in the Alps with Tim's Storch. My European scenery is bone stock and it seems I have several runways in France and Switzerland in the valleys of the Alps that are below ground level. Is this something in my setup or an FS problem? Before I load up Holger's Alps mesh I was wondering if anyone knows of a flatten or some other fix for airports in this region?

View attachment 63281
 
They may be grass runways camouflaged by your winter textures. Have a look at the airports in question with AFCAD2 and see what the runway surfaces are listed as - or post the airport ID's and someone here can do it.
 
Tom Clayton said:
They may be grass runways camouflaged by your winter textures. Have a look at the airports in question with AFCAD2 and see what the runway surfaces are listed as - or post the airport ID's and someone here can do it.
Click to expand...

These were all paved strips Tom. I started on the runway at a few of them with very odd visuals. I take off then pop up out of the ground. I haven't messed with AFCAD but that sounds like a good suggestion. I'll also get a list of a few of the offending airports.
 
Hey Tom,
I might have confused you with the picture. That's just another shot of Tim's great Storch, it was not meant to show the issue I'm having, sorry. :banghead:
 
As I said in another topic, together with the Mesh from Holger, you should install the swizzerland landclass nammed ebch3tot.zip. It will definitely improve the way Swiss looks :)
 
Daube said:
As I said in another topic, together with the Mesh from Holger, you should install the swizzerland landclass nammed ebch3tot.zip. It will definitely improve the way Swiss looks :)
Click to expand...

Thanks for the recommendation. Going to load it up soon! Some of the airports I'm having a problem with are:
LIMW Italy
LSTS Switzerland
LSGK Switzerland
LSGL Switzerland
LSGS Switzerland

There seem to be quite a few in this area. Holger's mesh helped somewhat. The giant hill in the middle of the runway at LSGS is still there but smaller. Is there good payware scenery for this area? UT Europe maybe?
 
Monk,

Where did you get that fantastic winter cammo paint scheme? I had a model of a Storch just like that when I was a little kid. Have wanted that for Tim's Storch for ages...

We need some cool little castle ruins for in the Alps. Fictional of course, but cool to use as landmarks. Those and some cool Challet's.


Bill
 
Perhaps this will be right what you are looking for Bill, available at www.avsim.com

Screenshot is my own, taken last night.

File Description:
This is a collection of landmark objects from Switzerland, mainly historic buildings, mountain shelters, hospital and other objects. All models are build using gmax and as close to the respective originals as possible. Use these landmarks for VfR flight or just for fun. The mounting shelters can all be reached by helicopters. All objects tested with Switzerland Professional 2004 scenery only (www.flylogicsoftware.com).



Filename: jj_swiss_bits.zip
License: Freeware, limited distribution
Added: 26th July 2008
Downloads: 1789
Author: Jannik Uhlmann
Size: 24303kb

Cheers! Mike :wavey:
 
Lionheart said:
Monk,

Where did you get that fantastic winter cammo paint scheme? I had a model of a Storch just like that when I was a little kid. Have wanted that for Tim's Storch for ages...

We need some cool little castle ruins for in the Alps. Fictional of course, but cool to use as landmarks. Those and some cool Challet's.


Bill
Click to expand...

Hi Bill,

I just did that paint job, I wanted some winter camo for the Alps. I'm still putting some final touches on it. I'm an amateur painter at best but I can email it to ya when I'm done if you want. One drawback is the top of the fuselage and cowl aren't mapped separately from the fuselage so the spots look more like zebra stripes on top. BTW, I took the Storch to Courchevel France and it dawned on me that the Kodiak would be a perfect plane for that airport. Gonna try that next.

Excellent tip Flyboy, gonna load that up. Thanks.

-Bob
 
Hey Bob,

Roger that. I would be honoured to have a copy. That is one well done cammo scheme.

FlyBoy,

Thanks for the heads up on that Swiss scenery. Off to download it.



Bill
 
If you've got a hill in the middle of Sion, then something's definitely out of whack. Unfortunately, I've never had issues with my scenery, so I've never had any dealings with repair methods. Hopefully, someone here can offer a fix.
 
Tom Clayton said:
If you've got a hill in the middle of Sion, then something's definitely out of whack. Unfortunately, I've never had issues with my scenery, so I've never had any dealings with repair methods. Hopefully, someone here can offer a fix.
Click to expand...

Thanks for checking Tom. At least now I know the problem is on my end. I figured there were too many messed up airports for it to be FS. Think I'll try reloading Europe and see if that helps.
 
Tom Clayton said:
If you've got a hill in the middle of Sion, then something's definitely out of whack.
Click to expand...

Amen Tom,
During the work-up to last year's RTW Race I had to do a night descent thru the goo into Sion.. sure glad there was no hump/hill/mountain to ruin a perfectly good Bearcat. Went out the next day to see it in the sunshine.. nope.. no hill

Rob
 
I've been in love with Sion ever since FS2002 when it was used for the "Alps Approach" canned flight. I also love taking off to the west from there, hugging the deck through the point where the canyon turns north, then heading out over the lake to Geneva. It's lots of fun in a go-fast like Wozza's 'Stang!:d
 
I reloaded the FS9 European scenery and that solved my problem. Everything back to normal and looking good. Thanks for the help. :applause:
 
I donl't have Holgar's Alps

This is FSGenesis mesh, 76-meter DEM for most of Europe, 19-meter DEM for the Alps. Would it interfere or would Holgar's mesh interfere with it?

I also have GE pro correlated with Active Sky 6.5 and Ultimate Terrain - Europe.

Caz
 
Cazzie said:
This is FSGenesis mesh, 76-meter DEM for most of Europe, 19-meter DEM for the Alps. Would it interfere or would Holgar's mesh interfere with it?

I also have GE pro correlated with Active Sky 6.5 and Ultimate Terrain - Europe.

Caz
Click to expand...

That looks great Cazzie. Holger's works well too but it creates some of the same problems I have with the Alaska mesh I'm using, some airfields wind up in trenches. I guess the more accurate mesh elevations don't always match up with the default airport altitudes. Courchevel wound up in a bit of a pit with Holger's mesh so I took it off temporarily. Any problems along those lines with FSGenesis? Or with UT Europe? Are you using the two concurrently?
 
You must log in or register to reply here.
Back
Top