wop fw190 p47 to huub

[greycap]

wop 190/ p47

hi
I was looking through my saved download discs from a fair time ago and came across the wop 190/p47 downloads. I only fly locally at whatever airport im at and don't need to see ordinance. these two aircraft have them a lot .I discovered that in the p47 I could swop the airfile to one that has no tanks etc . this wont work on the 190 ive tried swapping textures ,renaming etc and nothing ive tried works. so the query is is there a way to get clean 190s
thanks
greycap

 

[greycap]

hi
I was looking through my saved download discs from a fair time ago and came across the wop 190/p47 downloads. I only fly locally at whatever airport im at and don't need to see ordinance. these two aircraft have them a lot .I discovered that in the p47 I could swop the airfile to one that has no tanks etc . this wont work on the 190 ive tried swapping textures ,renaming etc and nothing ive tried works. so the query is is there a way to get clean 190s
thanks
greycap

airfile should read MODEL file

 

[huub vink]

Greycap,

You are talking in riddles for me. The each WOP P47 model has only one single model file and they all come with ordinance according what I see. Most WOP FW190 models only come with a single 300 liter droptank.
You can make a the ordinance on the P47 disappear like you can drop the droptank on the FW190 models, but this an animation and not a different model file......

So I wonder with what file did you swap the P47 file and what are you trying to achieve with the FW190?

A puzzled Huub

 

[Priller]

hi
I was looking through my saved download discs from a fair time ago and came across the wop 190/p47 downloads. I only fly locally at whatever airport im at and don't need to see ordinance. these two aircraft have them a lot .I discovered that in the p47 I could swop the airfile to one that has no tanks etc . this wont work on the 190 ive tried swapping textures ,renaming etc and nothing ive tried works. so the query is is there a way to get clean 190s
thanks
greycap

Try going into the aircraft.cfg file, find the [WEIGHT_AND_BALANCE] section and set the entry for the external tank to zero.

Priller

 

[greycap]

wop

Greycap,

You are talking in riddles for me. The each WOP P47 model has only one single model file and they all come with ordinance according what I see. Most WOP FW190 models only come with a single 300 liter droptank.
You can make a the ordinance on the P47 disappear like you can drop the droptank on the FW190 models, but this an animation and not a different model file......

So I wonder with what file did you swap the P47 file and what are you trying to achieve with the FW190?

A puzzled Huub

the p47 has numbered model files I picked model no 30 as that was the one that has no ordinance . alter that number in each aircraft cfg and the rocket rails disappear. that doesn't work on the 190 . how to drop the tank on the 190 I couldn't see that in the manual? or in the aircraft

 

[huub vink]

Well I now understand what you have done, but actually I'm even more puzzled. Why do you purchase a package with 7 more or less authentic differents model from various sub-models from the P-47 the and replace them all by one single model?

The keys to drop your drop tanks for any model are set in FS2004. Use the drop down menu options from FS2004, select controls and assignments look for the drop tanks options and choose the option you want and the keys you want to assign. This work for any model which has the option to drop its tanks.

Cheers,
Huub

 

[greycap]

hi huub
couldn't get the reply option to work
the reason I brought the package was back when I had a few quid to spare . when I couldn't get clean aircraft or to fly as I like I stored them on a disc until two weeks ago.
the reason for using the same model 30 file is that the rocket tubes stayed on until I used that file, that doesn't seem to work in the 190 . I tried to activate drop tank option in 2004 that doesn't work on either aircraft !
so, until I can find out how to swap and rename bmp files in textures and entries in cfg files im stuck with only three clean options for wop190 aircraft to fly as I like.
cheers
greycap

 

[huub vink]

As you can see I have merged both threads into one.

Attached you will find a zip file with the tank texture. I have "alpha-ed" the tank texture. Place the included texture in all the FW190 texture folders. The tank is still there only you can see in anymore.

I will have a look whether I can do the same for the P-47.

Cheers,
Huub

View attachment 79335

 

[greycap]

As you can see I have merged both threads into one.

Attached you will find a zip file with the tank texture. I have "alpha-ed" the tank texture. Place the included texture in all the FW190 texture folders. The tank is still there only you can see in anymore.

I will have a look whether I can do the same for the P-47.

Cheers,
Huub

View attachment 79335

hi huub
thanks for your time. but for some reason I cant get your zip to open into my computer it just downloads as an attachment and when I try to open it just stays as an attachment that only opens as another attachment. any clue as to what I should do or what im doing wrong so near and yet so far away.
try not to give up on me
thank you
greycap

 

[huub vink]

As I can download and unzip the file without any problem, I haven't got a clue why you can't. Can anyone else download the file and check whether it can be opened? Thanks.

 

[Priller]

No problem here Huub. Downloaded and extracted? Just one problem: I don't run FS9 anymore...

Priller

 

[Dangerousdave26]

Don't try to open it when the attachment message pops up. Simply download it to your PC. Then go to your downloads folder and use 7zip to unzip it.

 

[greycap]

Don't try to open it when the attachment message pops up. Simply download it to your PC. Then go to your downloads folder and use 7zip to unzip it.

hi
downloaded 7zip . the attachment is in my downloads file . I managed to get it to unzip into a file then opened the file and there was the attachment tried to open it and it just opened with a message open or save or save as and it just keeps repeating to attachment.
cheers for your time
greycap

 

[huub vink]

The problem is that I don't have clue what you are doing and therefore I simply don't know is going wrong. The process is quite straight forward and even without a compressing program like 7zip, winrar or winzip you should be able to use this file. I have the feeling you have downloaded the link instead of the file.

When you click the link in my post it automatically starts the download. The file is now automatically saved somewhere on your PC where you normally save your downloads. the file is called "tank_FW190.zip" and is 106 kB in size. When you double click it with you left mouse button you can see the contents, which is one single file called "tank.bmp". Now click on it with your right mouse button an select "copy".

Now you can copy the file where ever you like.

Cheers,
Huub

 

[greycap]

The problem is that I don't have clue what you are doing and therefore I simply don't know is going wrong. The process is quite straight forward and even without a compressing program like 7zip, winrar or winzip you should be able to use this file. I have the feeling you have downloaded the link instead of the file.

When you click the link in my post it automatically starts the download. The file is now automatically saved somewhere on your PC where you normally save your downloads. the file is called "tank_FW190.zip" and is 106 kB in size. When you double click it with you left mouse button you can see the contents, which is one single file called "tank.bmp". Now click on it with your right mouse button an select "copy".

Now you can copy the file where ever you like.

Cheers,
Huub

thanks for all your efforts. I have eventually found where the file is , sadly it only opens in the inside of the file in computer language so I had this problem a while ago and im missing some sort of protocol all other files open ok . I thought it was fixed
cheers for your help
greycap

 

[Shessi]

Just tried it out, on my Win10 pc and works fine, also on my XP pc.

Go to the original zip file, and click on it to open it, but don't use the unzip command, just drag the folder/file onto a blank area of the screen, this should do the trick OR

I've attached the tex non-zipped, so just download, and change the extension from .jpg to .bmp, simples...

Cheers

Shessi

 

[greycap]

Just tried it out, on my Win10 pc and works fine, also on my XP pc.

Go to the original zip file, and click on it to open it, but don't use the unzip command, just drag the folder/file onto a blank area of the screen, this should do the trick OR

I've attached the tex non-zipped, so just download, and change the extension from .jpg to .bmp, simples...

Cheers

Shessi

hi again
I got the zip from your file by dragging and dropping put it in the texture ,didn't work, renamed it and deleted the original same result got your non zip picture changed it to bmp put it in the texture file in another aircraft that partially worked but now I have a tank shaped light bulb effect . so i'm obviously corrupting the file . you say you have win 10 /xp I have win 7 so there must be some conflict. or I need a new computer. thank you very much for your time. I will now delete all the attachments, zips and files and have another go ,after a cup of tea !
best wishes
greycap

 

[huub vink]

For .zip files there is no real difference between both Windows version. The way a .bmp file is displayed is the sim is controlled by the model and FS9, from which we both have the same versions.
So there is definitely something you do wrong and there is no better way I can explain what you have to do than what I already did.

Cheers,
Huub

 

[greycap]

For .zip files there is no real difference between both Windows version. The way a .bmp file is displayed is the sim is controlled by the model and FS9, from which we both have the same versions.
So there is definitely something you do wrong and there is no better way I can explain what you have to do than what I already did.

Cheers,
Huub

hi again .
one last try if you don't mind. I finally got your attachment on my screen but it only opens in code any idea what protocol im missing
thanks again
greycap

 

[huub vink]

What do you have on the screen? The .zip file or the image which was in it? Judging your message I think you are looking at the binary code of the image. In more common language; the ones and zeros how a computer stores an image. This means you are opening the texture, which is a step too far.

Ensure you have the complete tank_FW190.zip file on you desktop and just do what I described in my post from yesterday's evening at 23:56

Cheers,
Huub