• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

CP-140 Aurora P3Dv4

K

kbt

Charter Member
Canada_CP140_L.jpg

cp140_p3d_lighting.jpg


P3Dv4 model only / 1.5 MB zip file
https://drive.google.com/open?id=1ow5vVQgZ-AbX3axqQLEsP_9aIwZmpOV4



P3Dv4 CP-140 Aurora set / 33 MB zip file/ (P3C ORION FSX is required.)
https://drive.google.com/open?id=1C_0G3hbgWqYNo-RU9r25YPMvuersezBV
 

Attachments

  • Canada_CP140_L.jpg
    Canada_CP140_L.jpg
    62 KB · Views: 4
Beautiful!

A question. Has anyone figured out how to extend/retract the boarding ladder and open/close the bomb bay doors? I believe these problems were mentioned by FS KBT when they released their FSX port over, but have never read of a fix for either. Thanks, NC
 
Navy Chief said:
Beautiful!

A question. Has anyone figured out how to extend/retract the boarding ladder and open/close the bomb bay doors? I believe these problems were mentioned by FS KBT when they released their FSX port over, but have never read of a fix for either. Thanks, NC
Click to expand...


These problems will mostly be solved by using "Door Open / Close Gauge" or other similar gauges.
I have installed the freeware "Door Open / Close Gauge". Although it is unknown whether this influence, even key operation which does not use this gauge works reliably. Of course it works even if you use a gauge.

Thank you
 
kbt said:
These problems will mostly be solved by using "Door Open / Close Gauge" or other similar gauges.
I have installed the freeware "Door Open / Close Gauge". Although it is unknown whether this influence, even key operation which does not use this gauge works reliably. Of course it works even if you use a gauge.

Thank you
Click to expand...

Thank you so much for your repky! NC
 
kbt said:
These problems will mostly be solved by using "Door Open / Close Gauge" or other similar gauges.
I have installed the freeware "Door Open / Close Gauge". Although it is unknown whether this influence, even key operation which does not use this gauge works reliably. Of course it works even if you use a gauge.

Thank you
Click to expand...

Well, I have tried, but not able to get the ladder to extend. As mentioned, key operation (Ctrl + Shift + W) does not work for me either. Anyone else have success? Thanks. NC
 
Navy Chief said:
Well, I have tried, but not able to get the ladder to extend. As mentioned, key operation (Ctrl + Shift + W) does not work for me either. Anyone else have success? Thanks. NC
Click to expand...

Yeah, but this is in FSX, not P3D. Shift+E+2 doesn't do it for you?

Canuck P-3 ladder extended.jpg
 
Navy Chief said:
All.that does is the same as Shift + E (Open/close door)
Click to expand...
This is all starting to sound familiar. I remember checking my P-3C a few months ago when you first mentioned no ladder extension. I found that to be true then and just now as I tested the P-3C again. Shift+E opens the door and Shift+E+2 just closes the door. Now, I have the CP-140 Aurora in it's own folder (borrowed the panel and sound folders from the P-3C and discarded the P3D aircraft.cfg) and the ladder works fine. Go figure!

Are your two aircraft together in the same aircraft folder or separate?
 
MrZippy said:
This is all starting to sound familiar. I remember checking my P-3C a few months ago when you first mentioned no ladder extension. I found that to be true then and just now as I tested the P-3C again. Shift+E opens the door and Shift+E+2 just closes the door. Now, I have the CP-140 Aurora in it's own folder (borrowed the panel and sound folders from the P-3C and discarded the P3D aircraft.cfg) and the ladder works fine. Go figure!

Are your two aircraft together in the same aircraft folder or separate?
Click to expand...

The Aurora is in its own folder, but I will try your other steps. Will report back. Thanks! NC

UPDATE: No go. I must have a different panel than the one you have. Still same problem. :banghead: NC
 
Navy Chief said:
The Aurora is in its own folder, but I will try your other steps. Will report back. Thanks! NC

UPDATE: No go. I must have a different panel than the one you have. Still same problem. :banghead: NC
Click to expand...
The panel I'm using came with the FSX P-3C. Folder is called the general purpose virtual cockpit for the p-3 series.
 
Corvette99 said:
Sorry to jump in here but I was wondering , since seeing the v4 updates for the F-2 and P-3, is there any plan to update the Super Hornet and Growler for P3Dv4 ?
Thanks , Scott
owner of Miramar Flying Club
www.miramarflyingclub.com
Click to expand...

Our FA 18 was created using FSDS.
Currently the FSDS source of FA 18 does not exist. Therefore, it can not be done because there is no base source.
 
Last edited:
I'm sure I'm not the only one but I don't follow what I'm supposed to do with the downloaded files cp-140ab_kbt_v1_1. I'm running P3D V4 but I don't understand why the file has 2 aircraft config files and 2 model folders.
I have the previous P-3C Orion on my hard drive.
Can some one explain please?

MIke
 
CavOk said:
I'm sure I'm not the only one but I don't follow what I'm supposed to do with the downloaded files cp-140ab_kbt_v1_1. I'm running P3D V4 but I don't understand why the file has 2 aircraft config files and 2 model folders.
I have the previous P-3C Orion on my hard drive.
Can some one explain please?

MIke
Click to expand...



What do you mean?
 
Last edited:
CavOk said:
I'm sure I'm not the only one but I don't follow what I'm supposed to do with the downloaded files cp-140ab_kbt_v1_1. I'm running P3D V4 but I don't understand why the file has 2 aircraft config files and 2 model folders.
I have the previous P-3C Orion on my hard drive.
Can some one explain please?

MIke
Click to expand...


Mike, what I did was this: rename the "model" folder to model.bak, and the "Aircraft.cfg" file to Aircraft.bak. Then rename both the p3dv4 Aircraft.cfg and p3dv4 Model folder to just Aircraft and Model.

Worked for me, except I still have the problem with the ladder not extending/retracting. NC
 
Navy Chief said:
Mike, what I did was this: rename the "model" folder to model.bak, and the "Aircraft.cfg" file to Aircraft.bak. Then rename both the p3dv4 Aircraft.cfg and p3dv4 Model folder to just Aircraft and Model.

Worked for me, except I still have the problem with the ladder not extending/retracting. NC
Click to expand...



I am grateful for NavyChief's follow up.

Hiroaki

Let's talk about the ladder at another opportunity.:wavey:
I sent you an e-mail.
 
Last edited:
You must log in or register to reply here.
Back
Top