Update Douglas_C-47_Beta_V3.14 feedback and support topic

In case anyone is interested, I flew this plane in a VATSIM event last month & took some video. Not all of it was in-cockpit but a good chunk of it was. It is the v3.14 with Manfred's speech system bugfix from Feb 14th, plus the engine sound package from Mike Maarse.
Check it out here: https://youtu.be/8e1q6JcDfMc
 
any chances of a FSE fix/plugin? i really like this c-47 over justflights and would love to be able to use it with fse so i can switch to the two "center" auxillary tanks.
 
SkyHawk024 said:
any chances of a FSE fix/plugin? i really like this c-47 over justflights and would love to be able to use it with fse so i can switch to the two "center" auxillary tanks.
Click to expand...

You could have asked in the FSE forum and you would have got this... it's a work-around.

Manfred Jahn's (Sim Outhouse) fuel transfer system is not compatible with the FSE client, the lower gauges and the transfer system DO NOT work with the client.
The fix below will still require you to "manually" move the fuel in the FSX fuel menu. But otherwise the client will load and calculate the correct amount of fuel.
When your low fuel lights on the upper panel come on, or with ver 3.214 and the vintage VC, you'll need to watch the fuel gauge, pause, go to the fuel menu and swap the 4 sets of numbers you see there. Move the low numbers to the slots where the high numbers are and visa versa, make sure to not change the total amount of fuel. Go back to the cockpit, un-pause and your upper fuel guage will read full again, which means you can now use the remaining 400 gallons and continue flying.
Copy & paste the fuel configuration below in your aircraft.cfg


[fuel] // AMM TCDS 6a2
// standard fuel tank config: 804 gal
LeftMain = -20.04, -4.0, -2.5, 202.0, 4.0 // left fwd center
RightMain= -20.04, 4.0, -2.5, 202.0, 4.0 // right fwd center
center1= -22.99, -4.0, -2.5, 200.0, 9.0 // left aft center (aux)
center2= -22.99, 4.0, -2.5, 200.0, 9.0 // right aft center (aux)
//tanks set with same distance fwd/bwd at main spar


// additional R4D8 wing tanks: 822 gal
// LeftTip= -22.68, -17.0, -2.1, 411.0, 2.0 // left outer wing
// RightTip= -22.68, 17.0, -2.1, 411.0, 2.0 // right outer wing
 
Alky said:
You could have asked in the FSE forum and you would have got this... it's a work-around.

Manfred Jahn's (Sim Outhouse) fuel transfer system is not compatible with the FSE client, the lower gauges and the transfer system DO NOT work with the client.
The fix below will still require you to "manually" move the fuel in the FSX fuel menu. But otherwise the client will load and calculate the correct amount of fuel.
When your low fuel lights on the upper panel come on, or with ver 3.214 and the vintage VC, you'll need to watch the fuel gauge, pause, go to the fuel menu and swap the 4 sets of numbers you see there. Move the low numbers to the slots where the high numbers are and visa versa, make sure to not change the total amount of fuel. Go back to the cockpit, un-pause and your upper fuel guage will read full again, which means you can now use the remaining 400 gallons and continue flying.
Copy & paste the fuel configuration below in your aircraft.cfg


[fuel] // AMM TCDS 6a2
// standard fuel tank config: 804 gal
LeftMain = -20.04, -4.0, -2.5, 202.0, 4.0 // left fwd center
RightMain= -20.04, 4.0, -2.5, 202.0, 4.0 // right fwd center
center1= -22.99, -4.0, -2.5, 200.0, 9.0 // left aft center (aux)
center2= -22.99, 4.0, -2.5, 200.0, 9.0 // right aft center (aux)
//tanks set with same distance fwd/bwd at main spar


// additional R4D8 wing tanks: 822 gal
// LeftTip= -22.68, -17.0, -2.1, 411.0, 2.0 // left outer wing
// RightTip= -22.68, 17.0, -2.1, 411.0, 2.0 // right outer wing
Click to expand...

This does not work with the client i have. Ive tried.
 
SkyHawk024 said:
This does not work with the client i have. Ive tried.
Click to expand...

You must not be doing it exactly as outlined above, I've been with FSE since the beginning and have been using MJ's C-47 since it came out, it works for me and countless other users there.
 
[h=2]Installation MJ C47 v 3.1406 for P3Dv4 posted by Paughco...[/h]
Thanks for that, but the forum needs a valid registration and you have to be logged in to see the page... only problem is: you cannot register anywhere on the site...

I've been wanting a decent guide on how to get the new DC-3 into V4 for ages :(

Andrew
 
That's odd, Andrew. I clicked on the link in Paughco's post and it took me straight to the registration page asking me to create a username and create a password. I didn't do that because I use FSX, not P3Dv4, but are you saying that registration link does not work for you...or you don't see it like I do?

Randy
 
A2A shockwave 3D lights

Hi Folks,

I wonder if anyone has A2A shockwave lights profile for the C-47 V3.14 Beta?, I managed it with the C-47 V2 but V3 con.fig file is somewhat different and I don't wish to mess up the internal Red lights or gauge lighting, any help would be wonderful!!!
 
C47-3.14 interactive checklist

Hi,

I am a new member and hope posting in the correct section!

I have a question regarding C47-3.14 interactive checklist!

I can't hear the copilot! Callout option is turned on.I can also hear a hissing sound in the background.I reinstalled as admin. but still no joy!
P3D 4.1
Window 7 64
Asus Xonar DSX Soundcard
Any help would be appreciated!

Best Regards
Rainer
 
auto pilot c47

¿Hay alguna posibilidad de saber si podemos contar con el próximo piloto automático c47 en el futuro cercano? Muchas gracias
 
One question.. when I switch on the main fuel pumps, I get both the C47 fuel pump sound, but the standard C172 fuel pump soound as well. The aux fuel pump sound works as intended.. any ideas..?
 
Add

[fuel_pump]
maximum_volume=1000

to the sound.cfg (if it isn't present; otherwise change the value).
 
Hello everyone, someone could put the link to the update 3.1406 I only have the 1405 and I can not find the last anywhere, sorry for my English, use translator, thanks
 
You must log in or register to reply here.
Back
Top