• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

Martin Baker

gedm

gedm

SOH-CM-2022
I dont know if anyone in the basement has been following the thread over at the FS2004 forum about the Alphasim M.B.5 repaints.
http://www.sim-outhouse.com/sohforums/showthread.php?t=18167

But SOH member NickB had done up some sweet "what if" repaints for the FS9 version with a follow up alpha channel tweak for FSX by Rich. As luck would have it the FSX alpha channel adjustment also worked in the old uncivil sim (ours) so I took the liberty of tweaking the airfile and dp. for the CFS2 conversion by Shessi.
The dp. is for the prototype model since it has no wingtanks.

Once I adjust the reticle in the 2d panel I'll upload.

Cheers

G
 
Hi G, been using the RAF662 version, built for cfs2, with a good dp.

Just waiting for some lovely fella to make a navalised version with folding wings and a hooky.

regards Collin:ernae:
 
No folding wings or visual tailhook but the Alphasim version has a tailhook in the aircraft.cfg so it might work in CFS2 with the tailhook key, I have'nt got CFS2 installed so can't check it.
 
Sorry just rechecked the origional MB5 download and it does not have the tailhook entry in aircraft.cfg, I added one to mine for use in FSX with the cat facility also, the cat I suspect will not work in CFS2 but the tailhook should.

This is my tailhook entry, you may want to try it just copy/paste it into your CFS aircraft.cfg maybe right at the bottom.

[tailhook]
tailhook_length = 4.5
tailhook_position = -18.0, 0.0, 0.0
cable_force_adjust=1.0
 
Er... Could you make one for the U.S. Navy to try out on evaluation. With bright shiny blue paint and the letter "L" on the tail and the wings.
Only wishing...
 
Helldiver said:
Who do you want to have me kill?
Click to expand...
I''ll have a think about that and get back to you.

In the meantime, I have to tidy a few details before these are ready to upload. Rich or someone else will still have to make the necessary changes for them to work properly in FSX and CFS2 as I have neither of these.
 
As long as your tidying up, take the "L" on the tail and make it twice as large and centered on the tail. If you can, put a new car shine on the paint. On the F6-F the Navy found that they got 15 MPH when they went to gloss paint.
For this, I may commit to do away wih two people.
 
Nick, the bit to fix is MB5BANDP.bmp if you can get it to me. less than a minutes work or if you have any of my fixed versions open MB5BANDP.bmp with DXTbmp open the alpha channel click edit, sellect all, copy then open your new paint with DXTbmp, open the alpha channel click edit then paste it should give you 2 black squares, click save in DXTbmp click Alpha then refresh Alpha then save it as 32 bit/DXT3 or whatever, you should then have the prop and canopy fixed.
 
Collin said:
Hi G, been using the RAF662 version, built for cfs2, with a good dp.
regards Collin:ernae:
Click to expand...


Collin are you tellin me the cfs2 conversion already had a dp. with a weapons loadout?
If so, then I wonder why my cfs2 M.B. didnt have any oridinance in the dp.?
What ever the case, thanks for the info and no point in re-inventing the wheel as they say.. :ernae:

G
 
gedm, Re no point in re-inventing the wheel as they say, there is as that is a entirely different model it is not a conversion of the alpha model, the RAF662 version is pretty old now and the dp probably would not work on the alphasim model

gedm said:
Collin are you tellin me the cfs2 conversion already had a dp. with a weapons loadout?
If so, then I wonder why my cfs2 M.B. didnt have any oridinance in the dp.?
What ever the case, thanks for the info and no point in re-inventing the wheel as they say.. :ernae:

G
Click to expand...
 
AHH..that would be the problem, I was unaware of the other M.B.5. I assumed Collin was talking about the Alphasim bird...my mistake.

Thanks Rich

G
 
gedm, be aware Tim Conrad has also done a MB5 model so there are at least 2 beside the Alphasim model
 
Gedm and all....

RAF662 MB5 can be found here
http://www.raf662.com/modules.php?n...download&cid=32&min=10&orderby=titleA&show=10

Alphasim's thingy is here, (but I keep getting the 'time-out' page).
http://library.avsim.net/search.php?SearchTerm=alpha_martin-baker_mb5_fs9.zip

Piglets version is here, (but you get the 'Page Error' message).
http://www.sim-outhouse.com/index.p...ype=cfs2-aircraft&page=downloads&Category=BRI

I think this lot are for cfs2, well, they say they are.:icon_lol:

Are Piglets and Alphasim the same one?

Back at the turn of the century (luv that phrase but makes me sound a right git), I had a email conversation with the grandson of Martin Baker, (Andrew I think his name is). Upshot was, while there were no official plans made, navalising the aircraft would have entailed a slight increase in wing length between the undercarriage root and the first inboard gun to house the wing fold mechanism, and a hook similar to a Firefly's.

Skinners please note Rolls Royce badge went near the spinner and Griffon went under the exhaust (though the latter may well be painted over).

Great shame this aircraft never went into production.
Still that never stopped a cfs2 simmer...below are 2 piccies from a BPF experimental campaign and a picture of the replica in America.:icon_lol:

regards Collin:ernae:
 
Hi Collin

Collin said:
Gedm and all....

RAF662 MB5 can be found here
http://www.raf662.com/modules.php?n...download&cid=32&min=10&orderby=titleA&show=10

While this was done for CFS2 that was I think about 9 years ago so a much older model

Alphasim's thingy is here, (but I keep getting the 'time-out' page).
http://library.avsim.net/search.php?SearchTerm=alpha_martin-baker_mb5_fs9.zip

This is because Avsim has been down for over a month but it can be found on Flightsim.com while the Alphasim model is not CFS2 a conversion was done by Shessi I think

Piglets version is here, (but you get the 'Page Error' message).
http://www.sim-outhouse.com/index.p...ype=cfs2-aircraft&page=downloads&Category=BRI

I think that link goes to avsim also so the reason for the page error is the same as for the Alphsim at avsim

I think this lot are for cfs2, well, they say they are.:icon_lol:

Are Piglets and Alphasim the same one?

No they are 2 entirely different things, Piglets model is also older than the Alphasim

Back at the turn of the century (luv that phrase but makes me sound a right git), I had a email conversation with the grandson of Martin Baker, (Andrew I think his name is). Upshot was, while there were no official plans made, navalising the aircraft would have entailed a slight increase in wing length between the undercarriage root and the first inboard gun to house the wing fold mechanism, and a hook similar to a Firefly's.

Skinners please note Rolls Royce badge went near the spinner and Griffon went under the exhaust (though the latter may well be painted over).

Great shame this aircraft never went into production.
Still that never stopped a cfs2 simmer...below are 2 piccies from a BPF experimental campaign and a picture of the replica in America.:icon_lol:

regards Collin:ernae:
Click to expand...
 
Please note, the paint files for the MB5 that NickB has uploaded to SOH Fs 2004 repaints are for Fs 2004 and will still have the black prop and the canopy is not transparent, for CFS2 download these files the black prop and canopy has been fixed in them

All paints uploaded in a single pack including racers, still waiting for a password to upload to SOH so for the time being they are only availiable in the single pack at CBF.

This is to fix the black prop textures in FSX and it works in CFS2 there is no claim the model is FSX or CFS2 but Shessi did a conversion to CFS, it works ok I am told. While they will work in Fs9 I think it makes the prop and canopy a little to transparent so for Fs9 use stick with Nicks textures.

Included is settings for carrier ops both Cat (not CFS) and trap, there is no visible hook on the model but since there are some FAA paints I added virtual hook.



http://classicbritishfiles.com/index...leinfo&id=1335
 
Oldest maybe, but I find the RAF662 version still the best for cfs2 and works well as AI. In a early and altered DCG campaign my wingmen soon became high scoring aces using this version.

This is not to say that the others are bad, they certainly look good, but in cfs2 its the combat and the fps for the guys out there with the small computers.

regards Collin:ernae:
 
You must log in or register to reply here.
Back
Top