• There seems to be an up tick in Political commentary in recent months. Those of us who are long time members of the site we know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religiours commentary out of the fourms.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politicion will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment amoung members. It is a poison to the community. We apprciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

Attention Yago

Artist types do tend to have extreme personalities, overly sensitive, twitchy feelings, easy to fly off the handle, etc. One of the large forums I frequeunt for my CGI art work is full of these types. Not a day goes by without one of them complaining that they didn't get the attention they deserved in the numerous galleries, or no one answered their post quick enough, or that they feel singled out for some reason or another. My point is, it's the same for people in this community that create, we have all types and need to realize that not everyone is going to see eye to eye or react in a way that makes sense to you.

Personally, I am surprised this thread is even this long and I didn't understand the reason it was started in the first place as no one was questioning anyones talent in the closed thread, just certain peoples behavior. Keep in mind that just because a person has a talent, that does not give them the right to behave any better or worse than someone without any talent.

In keeping with the OP, thanks for the great paints Yago, much appreciated. :ernae:
 
I started the thread and wanted to say that I appreciate Yago's work. The guy has done some incredible paint schemes.

:ernae:


<--- also a photo real fan :engel016: I wish I was talented enough to make my work look like the actual plane.
 
MCDesigns said:
Artist types do tend to have extreme personalities, overly sensitive, twitchy feelings, easy to fly off the handle, etc. One of the large forums I frequeunt for my CGI art work is full of these types. Not a day goes by without one of them complaining that they didn't get the attention they deserved in the numerous galleries, or no one answered their post quick enough, or that they feel singled out for some reason or another. My point is, it's the same for people in this community that create, we have all types and need to realize that not everyone is going to see eye to eye or react in a way that makes sense to you.

Personally, I am surprised this thread is even this long and I didn't understand the reason it was started in the first place as no one was questioning anyones talent in the closed thread, just certain peoples behavior. Keep in mind that just because a person has a talent, that does not give them the right to behave any better or worse than someone without any talent.

In keeping with the OP, thanks for the great paints Yago, much appreciated. :ernae:
Click to expand...
Well put Michael
there are many talented people here
just different talents
I believe the Staff here try to Moderate the behavior of anyone
regardless of who!
H
 
After playing in bands, I found you have to be at least a little bit goofy to be creative.

And drummers were the worst!

Bob
 
Great painter or not, there's no reason to be an @ss.

The guy was an @ss on another thread (now closed), now he gets a thread worshipping him. I love his repaints too and have many of them, but don't support such attitude.

Sorry to spoil the thread guys.
 
guzler said:
Great painter or not, there's no reason to be an @ss.

The guy was an @ss on another thread (now closed), now he gets a thread worshipping him. I love his repaints too and have many of them, but don't support such attitude.

Sorry to spoil the thread guys.
Click to expand...
I think you are missing the point!
we are all @sses sometimes
is that not a Staff matter?
im not defending or supporting
but are not posts like yours the same?
i can see this thread just disappearing
i have some of the same talents as tommy cooper!
disappears Just like that:pop4::pop4:
H
 
Ok,thank you for this post regardless of good or the bad it,s been said about my work and me.I do apeciate honesty in such matters.I know I am.Some you may call it brutal honesty ,some rudness or even
borderline nut case.
I have to admit it was a time when I could it hold it better. But I never handled it with tact.Couldn,t ,it,s not me.Face to face or not ,you interact with me in a bad way I will let you know..
Sorry that few persons could spolied the mood of so many ,it is uncanny and for that reason i,m sorry ..But i wont apologise for what I said or why I did it..Long story short,it was more than justified
and I can anytime prove it.Nobody wants that,I know..
I think it equaly sad when so many persevere on spoiling the mood of the few ,for no other reason that there are working for them, for free. Sure ,most of you had no idea about the whole story
behinde a conflict so it,s normal to assume what you all do:"Drama queen over reacting, let it go, bend over and take it like a man "..Sure ,..but i can,t so the only solution I see it,s for me to stop
sharing..but that would be bad for those good people whom request and like my stuff for years ? It would be 100% wrong..now it,s only 50 % wrong, by fending the evil ones with one hand and sharing with the
other.For how long ? Not long,that,s for sure.
Sure you can always bann me ,this way I wont be blamed for not sharing..I don,t know.I,may volunteer for that.Thank you again for this post and all your comments.
I,ll will like take this opportunity to say thank you to my wife Amy ,my extended familly and co-workers for been such good troopers and supporting me during the good times and bad times!....God Bless America !!
Thank you!!!


kidding..i want to promote this..

uk129a.jpg



and a future bare metal..

met1.jpg



met2.jpg
 
Love that aluminum work Yago.


Ive been on the edge of letting go many times with emails and all. It can be trying. When you get 100 or 200 emails and a few are rough edged, it can take it out of yah.

:ernae:


Bill
 
Nice work, but I really want that airport in the background, what/where is it please?

uk129a.jpg
 
MCDesigns said:
Nice work, but I really want that airport in the background, what/where is it please?
Click to expand...

My best gues would be to try find it on avsim.ru.Tarmac is photoshop edited so dont expect that part..still looks good and worth having.

form the scenery Read Me file:

Scenery of Sokol airport (UHMM), Russia, Magadan
Andrew Bolovin <bolovin@mail.ru>
For FSX
Version 1.01 (1.10.2008)
 
Keep going Yago mate, you've got more friends and admirers of your work than enemies!! Its a shame no one is allowed to repaint the Mirage 2000, I was looking forward to seeing what you'd have done with it mate!!
 
Hello :wavey:

I read your post Yago and my English is not really TOP, I think that you has write good things, I like very much the honest persons and I am satisfied to find you with us, I don't want to make of politics on this forum but I was able to read on your "Avatar" that you are American, I have many friends in the USA.

If the moderators don't like this post you you can delete it .......
This time I don't spoken about FSX but about another passion than I like very much: I am a big passionate person of American locomotives and the American history and I have moreover many locomotives G-scales that I bought in the USA.
I am also member of the Web site: http://www.mylargescale.com, this Web site concerns the American locomotives G-scales and with this forum I have many friends who are as you Americans and who helped a lot me.

If I write these some lines it's because in the end of your post has write: God Bless America !!
And as I am a passionate person of the American history since I am a child, because I have many friends in the USA and especially because even though I do not agree with the French politics(policy) ( my country) I wanted to say to you that I lived in live at the TV the terrorist attack of the 9 - 11 - 2001 and that never I could forget these horrible images and this horrible day, I cried when I saw this horeur in the TV in Live.
Then even though I am French I am OK with you to say: God Bless America !!

Now I think that we can speak about FSX ......... Congratulation for your work.

Here my locomotives collection US: http://1stclass.mylargescale.com/skullleader/Last%20Photos/My%20collection.jpg (sorry for the poor quality, it's an old photo).


Best regards, Skulleader :ernae:
 
Skullleader..

NICE trains....YUP..I like trains too !

We will not remove anything you said...

Thanks for your appreciation of the USA....

YUP....9-11 was a terriable day..I had to leave work I was so upset over the events....It was a tough day for the world to watch.....Thank you.!
 
Wow, the bare metal czech one looks unreal.

If you're looking for future inspiration (and I hope you do), this L-39 would be very very welcome ...

l39v-171.jpg


It's one used by the former GDR (you know, "east germany") as a trainer for the NVA. As for the tail logo ...

180px-Emblem_of_aircrafts_of_NVA_(East_Germany).svg.png


Sorry about the bad image quality, shots of those are really rare. And here is an image of a 1:48 scale model to show the top...

680-7808.jpg


The bottom of the wings is the same as the top.
 
You must log in or register to reply here.
Back
Top