First to report - Epic LT 1.8 out now!

Question:

As I have customised and high-res interior textures, I am always wary of upgrading the rev for my Epic. For 1.8, can I keep all my interior DDS files that works for 1.7, especially around the panel area? Do I gain anything if I use 1.8 panel textures?
 
Another question:

Is the new G1000 still as FPS friendly as before? So far, Lionheart's is about the only complete glass system that can run on my 4-year-old PC with reasonable FPS.
 
Hey guys,

In this update, the Garmin surround bazel is upgraded, and a new nightmap for it has been created (glowing fonts on the face of the panel).

The NAV lights are also reverted back to stock illumination. Alot of people complained that the new NAV lights were to difficult to see, so I reset them to their original brightness.

Unfortunately, the manual has not been updated so for those buying it now, there is no manual. There is a simple ReadMe that comes with it, but thats it. I should have a revised manual (PDF file) out soon.


Bill
 
I've been recently working overtime and haven't even had time to fly in my precious sim. So today I finally had a change to do a complete flight and I took my Epic on a trip to Alaska at pale moonlight. And it was as relaxing as it all gets out. Nothing's more soothing than listening that turbo prop buzzing and watching the moonlit mountains pass you by:medals::medals:. Once again remembered why this is one of the best hobbies in the world:engel016:.

epic_night.jpg


epic_panel.jpg
 
Nice shots Pekka..

I love flying at night in the sim as well. But man, with Alaska, you're missing out on all that beautiful scenery below. Unless its a full moon. :d



Bill
 
Just discovered that the taxi light leaks through into the cabin. This problem may have existed long time ago.
 
For those in need of the optional larger fuel tank offered by Epic, here is what you can change in the "Aircraft.cfg" file under the [fuel] section.

Original:

[fuel]
//Longitudinal (feet), Lateral (feet), Vertical (feet), Usable(gallons), Unusable (gallons)
fuel_type = 2
number_of_tank_selectors = 1
electric_pump = 1
LeftMain = 0, -10, -1, 144, 0
RightMain = 0, 10, -1, 144, 0

Extended range:

[fuel]
//Longitudinal (feet), Lateral (feet), Vertical (feet), Usable(gallons), Unusable (gallons)
fuel_type = 2
number_of_tank_selectors = 1
electric_pump = 1
LeftMain = 0, -8.228571429, -0.822857143, 175, 0 // Long range fuel tank installed:
RightMain = 0, 8.228571429, -0.822857143, 175, 0 // 350 gal. total.

The coordinates have been proven to maintain the perfect balance of the plane.
 
Lionheart said:
But man, with Alaska, you're missing out on all that beautiful scenery below. Unless its a full moon. :d
Click to expand...


The trick to make great night flying is to set the time in winter and full moon. Scenery will look outstanding. I gotta say that Epic and Kodiak have some of the best night lightings in their VCs that I've seen. That ambient glow created by the glass panels looks very realistic:medals:
 
Lionheart said:
Hey guys,

In this update, the Garmin surround bazel is upgraded, and a new nightmap for it has been created (glowing fonts on the face of the panel).

The NAV lights are also reverted back to stock illumination. Alot of people complained that the new NAV lights were to difficult to see, so I reset them to their original brightness.

Unfortunately, the manual has not been updated so for those buying it now, there is no manual. There is a simple ReadMe that comes with it, but thats it. I should have a revised manual (PDF file) out soon.


Bill
Click to expand...
Thanks Mr. Bill!

Could you do a A2A Shockwave Lights for the Epic LT (and even the Kodiak) variation?
 
JamesChams said:
Thanks Mr. Bill!

Could you do a A2A Shockwave Lights for the Epic LT (and even the Kodiak) variation?
Click to expand...
I include my light config settings with all my Epic repaints James but just in case they don't appeal to you my data is below:

[lights]

//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing 6=taxi, 7=recognition, 8=wing, 9=logo 10=cabin

light.0 = 3, -1.99, -21.26, 0, fx_shockwave_navred //fx_navred
light.1 = 3, -1.99, 21.31, 0, fx_shockwave_navgre //fx_navgre
light.2 = 3, -23.65, 0, 7.31, fx_shockwave_navwhi //fx_navwhi
light.3 = 3, -2.25, -21.31, 0.03, fx_shockwave_strobe //fx_strobe
light.4 = 3, -2.25, 21.34, 0.05, fx_shockwave_strobe_2 //fx_strobe

light.5 = 5, -1.59, -21.06, 0, fx_shockwave_landing_light_small // landing light ball
light.6 = 5, -1.59, 21.06, 0, fx_shockwave_landing_light_small // landing light ball

light.7 = 6, 8.00, 0.25, -2.0, fx_shockwave_landing_light_narrow_down_22// taxi light
light.8 = 6, 8.00, -0.25, -2.0, fx_shockwave_landing_light_narrow_down_22// taxi light

light.9 = 7, -2.64, 0, 2.02, fx_vclight // pax cabin overhead
light.10 = 7, -6.34, 0, 1.72, fx_vclight // pax cabin overhead
light.11 = 2, 1.78, 0, 1.77, fx_vclight // cockpit overhead

​
You will also need to add this line to the [vcockpit01] section of either the 'panel' panel.cfg file or the 'panel.ws' panel.cfg file depending on which panel you use:
gauge09=shockwave_lights!SW Lights_taxi_gear, 1,1,1,1 //shockwave light

​
I can't help you with the Kodiak as I don't have that aircraft....yet.
 
Thanks Mr. Larry "Tako_Kichi"! :wavey:
and Thank you Mr. Pekka "Bushpilot"! :wavey:
 
Thanks Wombat for the heads up on the taxi lights and the long range fuel tanks.

Can I post that on my news Blog?


That interior in your screenshot must be the one BananaRammaBob did. Those brochures on the table look brilliant!



Bill
 
Question for Lionheart

Hi Bill,
Downloaded what I thought was version 1.8 from the link provided in the e-mail. When I run the installer, it says it's installing version 1.7. Re-downloaded the installer and have the same issue when running.
Is there a separate 1.8 installer available, or is it just a typo in the current installer?
 
DaveKDEN said:
Hi Bill,
Downloaded what I thought was version 1.8 from the link provided in the e-mail. When I run the installer, it says it's installing version 1.7. Re-downloaded the installer and have the same issue when running.
Is there a separate 1.8 installer available, or is it just a typo in the current installer?
Click to expand...

Hey Dave,

hmm... Thats odd. I may have missed a notation somewhere in the installer.

Can you create a Temp folder on your desktop, then run the installer and direct it to install to the Temp folder, then open the 'aircraft.cfg' file and read at the top. It should say Build 1.8.

Also, in the 'informations window' it will say Build 1.8 as well.


Bill
 
Bill,

If I run the texture re-sizer, will that mess up any of the new modifications made in the upgrade to 1.8? Thanks in advance!!
 
Lionheart said:
Hey Dave,

hmm... Thats odd. I may have missed a notation somewhere in the installer.

Can you create a Temp folder on your desktop, then run the installer and direct it to install to the Temp folder, then open the 'aircraft.cfg' file and read at the top. It should say Build 1.8.

Also, in the 'informations window' it will say Build 1.8 as well.


Bill
Click to expand...

Thanks Bill,
Checked it out, says it's build 1.7 in the aircraft.cfg
 
Felixthreeone said:
Bill,

If I run the texture re-sizer, will that mess up any of the new modifications made in the upgrade to 1.8? Thanks in advance!!
Click to expand...

Hey FelixThreeOne,

You should be fine. You can reduce the texture sizes and convert the 32bit textures to DXT3 or DDS 16bit DXT5.

Just make sure they are proper sizes of course; 1024, 512, 256...


Bill
 
You must log in or register to reply here.
Back
Top