Question

It is a matter of opening the aircraft.cfg

Look for the contact points section ( This example is annotated, yours might look different)

Code: 
[contact_points]
//0  Class
        //1  Longitudinal Position        (feet)
        //2  Lateral Position             (feet)
        //3  Vertical Position            (feet)
        //4  Impact Damage Threshold      (Feet Per Minute)
        //5  Brake Map                   (0=None, 1=Left, 2=Right)
        //6  Wheel Radius                (feet)
        //7  Steer Angle                         (degrees)
        //8  Static Compression           (feet)  (0 if rigid)
        //9  Max/Static Compression Ratio
        //10 Damping Ratio               (0=Undamped, 1=Critically Damped)
        //11 Extension Time              (seconds)
        //12 Retraction Time             (seconds)
        //13 Sound Type
        //14 Airspeed limit for retraction (KIAS)
        //15 Airspeed that gear gets damage at (KIAS)
//GEAR
point.0 = 1,  0.82,  0.00, -3.96, 1600, 0, 0.633, 40, 0.42, 2.5, 0.90, [COLOR=red]3.0[/COLOR], [COLOR=red]3.0[/COLOR], 0, 152, 180
point.1 = 1, -8.04, -4.79, -3.96, 1600, 1, 0.886,  0, 0.50, 2.5, 0.85, [COLOR=red]4.1[/COLOR], [COLOR=red]4.3[/COLOR], 2, 152, 200
point.2 = 1, -8.04,  4.79, -3.96, 1600, 2, 0.886,  0, 0.50, 2.5, 0.85, [COLOR=red]4.3[/COLOR], [COLOR=red]4.1[/COLOR], 3, 152, 200
//SCRAPES
point.3=  2, -6.20,-18.91,  0.50,  800, 0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0
point.4=  2, -6.20, 18.91,  0.50,  800, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0, 0
point.5=  2,-24.04,  0.00, -0.50,  800, 0, 0, 0, 0, 0, 0, 0, 0, 9, 0, 0
point.6=  2,  0.40,  0.00, -1.24,  800, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0
Set the extention and retraction times to 0 and the retracting gear will be disabled, Now please tell me why you wish to do this?
 
You must log in or register to reply here.
Back
Top