• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Please see the most recent updates in the "Where did the .com name go?" thread. Posts number 16 and 17.

    Post 16 Update

    Post 17 Warning

Aircraft engines turned off now at start-up!

V

vmx12

Charter Member
Help please! :icon_eek:

My son was playing FSX earlier today and must have hit a button or otherwise saved something incorrectly, because now when I start-up FSX and go to a jet or other aircraft in free flight, it starts with the engines off.

I did go to the default Cessna 172 and save this flight with the engines running, but this does not automatically transfer to other aircraft when I start them up in free flight. I can't imagine I have to save 40 or so different flights to get the engines on at start-up for each aircraft, since this just started happening today.

Prior to today, I would simply fire up FSX, select ANY aircraft - add-on or default - and the aircraft would start in free flight with the engines running.

And here's the rub...some aircraft are so high-end and realistic (VRS Superbug) that the CTRL-E option does not fire up the aircraft correctly and I have not yet mastered it manual start-up procedure, so I can't simply go through the start-up and save an aircraft like the Superbug as a default flight.

It seems there's a simple button or settings feature I need to tweak to undo what my son may have done.

Any assistance is greatly appreciated. Thanks!

VMX12
 
vmx12 said:
Help please! :icon_eek:

My son was playing FSX earlier today and must have hit a button or otherwise saved something incorrectly, because now when I start-up FSX and go to a jet or other aircraft in free flight, it starts with the engines off.

I did go to the default Cessna 172 and save this flight with the engines running, but this does not automatically transfer to other aircraft when I start them up in free flight. I can't imagine I have to save 40 or so different flights to get the engines on at start-up for each aircraft, since this just started happening today.

Prior to today, I would simply fire up FSX, select ANY aircraft - add-on or default - and the aircraft would start in free flight with the engines running.

And here's the rub...some aircraft are so high-end and realistic (VRS Superbug) that the CTRL-E option does not fire up the aircraft correctly and I have not yet mastered it manual start-up procedure, so I can't simply go through the start-up and save an aircraft like the Superbug as a default flight.

It seems there's a simple button or settings feature I need to tweak to undo what my son may have done.

Any assistance is greatly appreciated. Thanks!

VMX12
Click to expand...

Try going back to the original AC that Microsoft used, the trike and save that with the engines running and see if that will work. I have had the same problem. Also see if he turned the fuel off. It needs to be left on if you want to change plains with the engines running. Several times I had to do a repair on flighsim to make it work again. Try installing SP1 first though and SP2 or Accleration again before the Flightsim repair. Nothing will change on the repair of Flightsim. Have had to do it several times.

Bobr2:isadizzy:
 
Sounds like the FSX start up issue.
Changing the default starting flight can cause problems when starting with another aircraft.
If you delete all your saved flights, FSX "should" reset the default starting flight with the Trike.
 
heres an easier solution than deleting everything.. go into your fsx.cfg file. and search for situation. You should find

[USERINTERFACE]
PageID=1
SHOW_MISSION_CAPTIONS=0
PAUSE_ON_LOST_FOCUS=0
PROMPT_ON_EXIT=1
SITUATION=C:\Users\Warchild\Documents\Flight Simulator X Files\default

Delete everything on the line after Situation=. that will reset the default loadup for FSX ( you'll start with the trike again ) and should make it possible for you to have running engines..
 
heres an easier solution than deleting everything.. go into your fsx.cfg file. and search for situation. You should find

[USERINTERFACE]
PageID=1
SHOW_MISSION_CAPTIONS=0
PAUSE_ON_LOST_FOCUS=0
PROMPT_ON_EXIT=1
SITUATION=C:\Users\Warchild\Documents\Flight Simulator X Files\default

Delete everything on the line after Situation=. that will reset the default loadup for FSX ( you'll start with the trike again ) and should make it possible for you to have running engines..​
Click to expand...

Even better. Thanks.
 
All you need to do is delete your "Default" Flight from it's location on your hard drive. Then start FSX back up. It will recreate it automatically. This solves the "engines not starting" issue, and most other "issues" with regards to aircraft systems suddenly and inexplicably not working. :)
 
000rick000 said:
All you need to do is delete your "Default" Flight from it's location on your hard drive. Then start FSX back up. It will recreate it automatically. This solves the "engines not starting" issue, and most other "issues" with regards to aircraft systems suddenly and inexplicably not working. :)
Click to expand...

Thanks, Rick! It worked! It took me back to the default hang-glider aircraft and then I saved another aircraft and location in its spot. It seemed to work fine, but then it started again with the non-runnig engines at start-up. I will tweak some more.
 
robert41 said:
Sounds like the FSX start up issue.
Changing the default starting flight can cause problems when starting with another aircraft.
If you delete all your saved flights, FSX "should" reset the default starting flight with the Trike.
Click to expand...

Yes, this advice did work! But then when I went to save a different aircraft as default, it started again. Perhaps I should just leave the Trike as default then?
 
Bobr2 said:
Try going back to the original AC that Microsoft used, the trike and save that with the engines running and see if that will work. I have had the same problem. Also see if he turned the fuel off. It needs to be left on if you want to change plains with the engines running. Several times I had to do a repair on flighsim to make it work again. Try installing SP1 first though and SP2 or Accleration again before the Flightsim repair. Nothing will change on the repair of Flightsim. Have had to do it several times.

Bobr2:isadizzy:
Click to expand...

Where would I check to see if he turned off fuel? Would this be in the aircraft itself or some setting in FSX?
 
Deleted default aircraft

Okay, Gentlemen! Thank you All for your replies. I deleted the default flight and now it's back to the default Glider. I went ahead and saved this as the default flight. So now when I start-up, the glider is on the splash screen again, just like when I first flew the sim. I can now choose any aircraft - default or add-on - and it will put me in the same "flight" as the glider is in, where I'm soaring over the trees of "Harbour."

Now, like before, I'd like to create a new default flight, where I can begin the flight (in whatever aircraft I choose) on the runaway at some airport, for instance, with the engines running. I did select my P-51, for example, and put in on the active runway at some airport and saved it as default, and by Golly, my default flight is now the P-51, siting on the runway with its engines running.

But then, I went to one of my other aircraft (an add-on jet), and it started up on the same runway (all is good so far) and I shutdown the engines. I did manage to get them started again and flew a little but then ended the flight and chose another aircraft, which was also set on the same runway - but the dreaded engines were off. Ugh!

It's here that I'm doing something wrong, I think. :icon_eek:
 
Yes, this advice did work! But then when I went to save a different aircraft as default, it started again. Perhaps I should just leave the Trike as default then?
Click to expand...

Yes, if you want to start a flight with the aircraft ready to go. But of course you can start at any airport, any time/date, and weather setting. Once loaded, then just switch to an aircraft that you want to fly.

Some like a cold and dark start. Shut down the engine, fuel, batt, radio, lights, ect. Save this as default and starting a flight the aircraft will be cold and dark.
 
The problem I have had is that different airplanes have different levels of complexity. A simply GA flyer, when you shut it down,only deals with the ignition switch. More complex aircraft separate switches for master power switch, sub-battery switch, magneto(s), fuel pumps, and on and on. It's been more than once I have shut down a complex aircraft, only to not be able to start a simple one later. You have to figure out which complex aircraft you shut down, reload it, start it, and then reload the simple aircraft. It drives me nuts. But it could be worse!
 
You must log in or register to reply here.
Back
Top