-
There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.
If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.
Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.
The Staff of SOH
FAB - Brazilian Air Force 1941
- Thread starter UncleTgt
- Start date
Jagdflieger
Jr. Admin
Nice! Pepi should like those.
UncleTgt
SOH-CM-2025
Brazilian NA72 Harvard UT.zip
A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - Other
Description: AB NA72 Harvard by UncleTgt
This is a reworking of Oldwheat's A27 Harvard for CFS 2. It's meant to represent an NA72(NA44) Harvard advanced trainer of the newly formed Brazilian Air Force in 1941.
It's a combination of Oldwheat's A-27 & Warwick Carter's Harvard model & air files, & I tweaked the model so the untextured parts were the correct shading & added a kelti style prop transparency & exhaust effect, as well as the striking repaint.
All I've done is to build on the original hard work done by Wozza, Oldwheat & others. The real credit goes to these people.
To install, unzip the download and place your chosen files in the relevant aircraft model folders within the aircraft folder in your CFS2 Main Directory.
Thanks to
Warwick Carter for the original a/c
Oldwheat for his reworking to fill an unusual gap in early WW2.
This is freeware and subject to the usual conditions.
UncleTgt,
JUN 2013
To check it out, rate it or add comments, visit Brazilian NA72 Harvard UT.zip
The comments you make there will appear in the posts below.
A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - Other
Description: AB NA72 Harvard by UncleTgt
This is a reworking of Oldwheat's A27 Harvard for CFS 2. It's meant to represent an NA72(NA44) Harvard advanced trainer of the newly formed Brazilian Air Force in 1941.
It's a combination of Oldwheat's A-27 & Warwick Carter's Harvard model & air files, & I tweaked the model so the untextured parts were the correct shading & added a kelti style prop transparency & exhaust effect, as well as the striking repaint.
All I've done is to build on the original hard work done by Wozza, Oldwheat & others. The real credit goes to these people.
To install, unzip the download and place your chosen files in the relevant aircraft model folders within the aircraft folder in your CFS2 Main Directory.
Thanks to
Warwick Carter for the original a/c
Oldwheat for his reworking to fill an unusual gap in early WW2.
This is freeware and subject to the usual conditions.
UncleTgt,
JUN 2013
To check it out, rate it or add comments, visit Brazilian NA72 Harvard UT.zip
The comments you make there will appear in the posts below.
UncleTgt
SOH-CM-2025
Brazilian Boeing P12 repaints UT.zip
A new entry has been added to Add-Ons Library, category CFS 2 Skins - Other
Description: AB Boeing P12 revamp by UncleTgt
This is a repaint of Pepe's Brazilian Boeing P12 pack for CFS 2.
I tweaked the model & dp to use Wolfis US pilot, & added a kelti style prop transparency & exhaust effect, as well as new silver & green repaints.
All I've done is to build on the original hard work done by Paul Clawson, Pepe & others. The real credit goes to these people.
To install, unzip the download and place your chosen files in the relevant aircraft model folders within the aircraft folder in your CFS2 Main Directory.
Thanks to
Paul Clawson for the original a/c.
Pepe for his reworking to fill an unusual gap in early WW2.
This is freeware and subject to the usual conditions.
UncleTgt,
JUN 2013
To check it out, rate it or add comments, visit Brazilian Boeing P12 repaints UT.zip
The comments you make there will appear in the posts below.
A new entry has been added to Add-Ons Library, category CFS 2 Skins - Other
Description: AB Boeing P12 revamp by UncleTgt
This is a repaint of Pepe's Brazilian Boeing P12 pack for CFS 2.
I tweaked the model & dp to use Wolfis US pilot, & added a kelti style prop transparency & exhaust effect, as well as new silver & green repaints.
All I've done is to build on the original hard work done by Paul Clawson, Pepe & others. The real credit goes to these people.
To install, unzip the download and place your chosen files in the relevant aircraft model folders within the aircraft folder in your CFS2 Main Directory.
Thanks to
Paul Clawson for the original a/c.
Pepe for his reworking to fill an unusual gap in early WW2.
This is freeware and subject to the usual conditions.
UncleTgt,
JUN 2013
To check it out, rate it or add comments, visit Brazilian Boeing P12 repaints UT.zip
The comments you make there will appear in the posts below.
UncleTgt
SOH-CM-2025
Brazilian Vultee V11GB UT.zip
A new entry has been added to Add-Ons Library, category CFS 2 Skins - Other
Description: FAB Vultee V11GB repaint by UncleTgt
This is a repaint for Bismark 13's Vultee V11GB to represent an aircraft of the Brazilian Air Force in 1941.
I added a kelti style prop transparency & exhaust effect, as well as the striking repaint.
To install, unzip the download and place your chosen files in the relevant aircraft model folders within the aircraft folder in your CFS2 Main Directory.
Thanks to
Bismark 13 for the original a/c.
This is freeware and subject to the usual conditions.
UncleTgt,
JUN 2013
To check it out, rate it or add comments, visit Brazilian Vultee V11GB UT.zip
The comments you make there will appear in the posts below.
A new entry has been added to Add-Ons Library, category CFS 2 Skins - Other
Description: FAB Vultee V11GB repaint by UncleTgt
This is a repaint for Bismark 13's Vultee V11GB to represent an aircraft of the Brazilian Air Force in 1941.
I added a kelti style prop transparency & exhaust effect, as well as the striking repaint.
To install, unzip the download and place your chosen files in the relevant aircraft model folders within the aircraft folder in your CFS2 Main Directory.
Thanks to
Bismark 13 for the original a/c.
This is freeware and subject to the usual conditions.
UncleTgt,
JUN 2013
To check it out, rate it or add comments, visit Brazilian Vultee V11GB UT.zip
The comments you make there will appear in the posts below.
Mario Donadon
Members +
very good I had done the Vultee V-11
Mario Donadon
Members +
I will soon provide him at SHO
gaucho_59
Charter Member
Very nice addition...
It flies very nicely in FS9... however the pilot does not show... Is there any way to make it show? I see a texture for it but
the plane shows unoccupied...
If there is a way (through the aircraft.config or other) please let me know...
A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - Other
Description: AB NA72 Harvard by UncleTgt
This is a reworking of Oldwheat's A27 Harvard for CFS 2. It's meant to represent an NA72(NA44) Harvard advanced trainer of the newly formed Brazilian Air Force in 1941.
It's a combination of Oldwheat's A-27 & Warwick Carter's Harvard model & air files, & I tweaked the model so the untextured parts were the correct shading & added a kelti style prop transparency & exhaust effect, as well as the striking repaint.
All I've done is to build on the original hard work done by Wozza, Oldwheat & others. The real credit goes to these people.
To install, unzip the download and place your chosen files in the relevant aircraft model folders within the aircraft folder in your CFS2 Main Directory.
Thanks to
Warwick Carter for the original a/c
Oldwheat for his reworking to fill an unusual gap in early WW2.
This is freeware and subject to the usual conditions.
UncleTgt,
JUN 2013
To check it out, rate it or add comments, visit Brazilian NA72 Harvard UT.zip
The comments you make there will appear in the posts below.
It flies very nicely in FS9... however the pilot does not show... Is there any way to make it show? I see a texture for it but
the plane shows unoccupied...
If there is a way (through the aircraft.config or other) please let me know...
UncleTgt
SOH-CM-2025
Hi Gaucho,
Sorry for the delay in responding, but here in the UK even I have to sleep sometimes
:
The NA72 was based on Oldwheat's A27 Harvard, itself based on Warwick Carter's T6 Texan for FS2004. As such the model is optimised for CFS 2, &that means the pilot has been removed from the model & replaced by Martin Wright's RAF pilot & rear gunner as payloads in the dp file.
You could get hold of an FS2004 Wozzas T6 Texan a/c, I suspect the textures will fit OK (you may want to save as dxt3 & use the alpha channel for extra shine effects), all you will lose is the tail gunner & gun tubes.
Hope this helps
Sorry for the delay in responding, but here in the UK even I have to sleep sometimes
:The NA72 was based on Oldwheat's A27 Harvard, itself based on Warwick Carter's T6 Texan for FS2004. As such the model is optimised for CFS 2, &that means the pilot has been removed from the model & replaced by Martin Wright's RAF pilot & rear gunner as payloads in the dp file.
You could get hold of an FS2004 Wozzas T6 Texan a/c, I suspect the textures will fit OK (you may want to save as dxt3 & use the alpha channel for extra shine effects), all you will lose is the tail gunner & gun tubes.
Hope this helps
gaucho_59
Charter Member
Thanks a lot for the info...
Pretty soon I am going to be in your time zone... an hour earlier I think... my wife just left day before yesterday and I will follow sometime in July...
(we are going to be.. well she... stationed in Schweinfurt, Germany... and I will use Space-A to MIldenhall often to visit England)
Now, educate me... this means the textures of the pilot and gunner are called by the dp file in CFS2... BUT FS9 does not respond to that... I am assuming...
is there any modification possible to add a pilot and gunner... maybe different ones ? And, those CFS2 models that fly OK in FS9 and keep the pilot... it is
because they are part of the model? I really want to become conversant with all these technicalities... for I am basically an artist with little technical expertise...
Any help and lessons much appreciated..
Hi Gaucho,
Sorry for the delay in responding, but here in the UK even I have to sleep sometimes
The NA72 was based on Oldwheat's A27 Harvard, itself based on Warwick Carter's T6 Texan for FS2004. As such the model is optimised for CFS 2, &that means the pilot has been removed from the model & replaced by Martin Wright's RAF pilot & rear gunner as payloads in the dp file.
You could get hold of an FS2004 Wozzas T6 Texan a/c, I suspect the textures will fit OK (you may want to save as dxt3 & use the alpha channel for extra shine effects), all you will lose is the tail gunner & gun tubes.
Hope this helps
Pretty soon I am going to be in your time zone... an hour earlier I think... my wife just left day before yesterday and I will follow sometime in July...
(we are going to be.. well she... stationed in Schweinfurt, Germany... and I will use Space-A to MIldenhall often to visit England)
Now, educate me... this means the textures of the pilot and gunner are called by the dp file in CFS2... BUT FS9 does not respond to that... I am assuming...
is there any modification possible to add a pilot and gunner... maybe different ones ? And, those CFS2 models that fly OK in FS9 and keep the pilot... it is
because they are part of the model? I really want to become conversant with all these technicalities... for I am basically an artist with little technical expertise...
Any help and lessons much appreciated..
gaucho_59
Charter Member
Another little question...
I cannot understand what happens here...
The textures for both sides are basically the same mirrored textures.... why the one on the starboard side is yellow inside and
the other appears with the internal part colored and textured in the darker color?
Hi Gaucho,
Sorry for the delay in responding, but here in the UK even I have to sleep sometimes
The NA72 was based on Oldwheat's A27 Harvard, itself based on Warwick Carter's T6 Texan for FS2004. As such the model is optimised for CFS 2, &that means the pilot has been removed from the model & replaced by Martin Wright's RAF pilot & rear gunner as payloads in the dp file.
You could get hold of an FS2004 Wozzas T6 Texan a/c, I suspect the textures will fit OK (you may want to save as dxt3 & use the alpha channel for extra shine effects), all you will lose is the tail gunner & gun tubes.
Hope this helps
I cannot understand what happens here...
The textures for both sides are basically the same mirrored textures.... why the one on the starboard side is yellow inside and
the other appears with the internal part colored and textured in the darker color?
