Thank you Allen!

Allen said:
Nope. When the plane is used as ground object the center of the model is used.
Click to expand...

but, I do not understand why the .dp file?. I know that you need shift (move), the model in a gmax or fsds2 program, but the only that I know in .dp is you most change the old positions , so if you shif 0.1 m , you need add the 0.1m to all boxes and effects.

is it possible to fix the Centre with the .dp?:icon_eek:
 
Maxstuka said:
but, I do not understand why the .dp file?. I know that you need shift (move), the model in a gmax or fsds2 program, but the only that I know in .dp is you most change the old positions , so if you shif 0.1 m , you need add the 0.1m to all boxes and effects.

is it possible to fix the Centre with the .dp?:icon_eek:
Click to expand...

To my knowledge, No.

it would have to be done with the Gmax or FSDS. then re-exported. and so on. i'm not sure if moving the CoG in the CFG would help either. probly just mess up the flight dynamics.
 
mav said:
There's another option you can relocate the center point via scasm... this is quick and dirty.


image upload
Click to expand...

Hoooooo, very nice!.:emmersed:

Please can you explain how you do that?. and please attach the new mdl with this fix.
where I can download scasm?.I never use it.

you know how is the line to use a hexaeditor to change easy the values of the center point?
 
Last edited:
mav said:
There's another option you can relocate the center point via scasm... this is quick and dirty.
Click to expand...

Dose it have any effect on the DP and dose it work for when it is placed as ground object?
 
Maxstuka said:
Hoooooo, very nice!.:emmersed:

Please can you explain how you do that?. and please attach the new mdl with this fix.
where I can download scasm?.I never use it.

you know how is the line to use a hexaeditor to change easy the values of the center point?
Click to expand...

You don't have the "MDLC"????
MDLC decompile command below......
MDLC /a Raiden.mdl

This is NOT 1 of those hexeditor moments!

Allen said:
Dose it have any effect on the DP and dose it work for when it is placed as ground object?
Click to expand...

Yeh the CFG & DP files have too be adjusted as well, in this case pushed back to suit.
 
This is NOT 1 of those hexeditor moments!
Click to expand...

Ok, I understand of this speak, that is imposible the way of hexeditor.¿true?

mav said:
You don't have the "MDLC"????
MDLC decompile command below......
MDLC /a Raiden.mdl
Click to expand...

Yeah, I use the MDLC to convert files, I think that my MDLC is limited because can not run the .exe In DOS. Helpme please I need understand.
This is the Windows down when I try to use.

No run.jpg

I try using this file,No!.

not found.jpg

So the only that I can use in Windows 7 is this menú and works ok
mdlc.jpg

Before continue asking, I need that someone can help me get a MDLC that works well, or how to make it work fully in Windows 7 32 bit.

I ask apologies and thank you, but this teaching is vital, so that I can do many things of interest to all of us.

PD: We are very interested in the .mdl file, that you generated with the new location of the raiden, you could attach it in the thread, to download rapid.Please.
 
Last edited:
your not able to use the " MDLC /a".
what version are you using?
I could send what I have. right off hand, I don't remember where I got it.
 
Maxstuka said:
Ok, I understand of this speak, that is imposible the way of hexeditor.¿true?



Yeah, I use the MDLC to convert files, I think that my MDLC is limited because can not run the .exe In DOS. Helpme please I need understand.
This is the Windows down when I try to use.
Click to expand...
Max! tenés que usar la ventana dos. entonces escribes mdlc a/ x.mdl despues de alli se generará un archivo . sca que tendrás que modificar a tus necesidades y por ultimo tendras que compilarlo.


lo más facil es que dentro de la carpeta donde tenés los archivos de MKmdlc pegues el archivo . mdl pero lo renombres como x luego haces doble click en el ejecutable que dice
1~x Mdl to Scasm luego segenerará el archivo .sca que hablamos. para ultimo compilarlo con los otros ejecutables pero siempre con el archivo nombrado como x
 
misson said:
Max! tenés que usar la ventana dos. entonces escribes mdlc a/ x.mdl despues de alli se generará un archivo . sca que tendrás que modificar a tus necesidades y por ultimo tendras que compilarlo.


lo más facil es que dentro de la carpeta donde tenés los archivos de MKmdlc pegues el archivo . mdl pero lo renombres como x luego haces doble click en el ejecutable que dice
1~x Mdl to Scasm luego segenerará el archivo .sca que hablamos. para ultimo compilarlo con los otros ejecutables pero siempre con el archivo nombrado como x
Click to expand...
ahora,,,, ni idea de que modificar para tales efectos en el archivo scasm.
 
misson said:
Max! tenés que usar la ventana dos. entonces escribes mdlc a/ x.mdl despues de alli se generará un archivo . sca que tendrás que modificar a tus necesidades y por ultimo tendras que compilarlo.


lo más facil es que dentro de la carpeta donde tenés los archivos de MKmdlc pegues el archivo . mdl pero lo renombres como x luego haces doble click en el ejecutable que dice
1~x Mdl to Scasm luego segenerará el archivo .sca que hablamos. para ultimo compilarlo con los otros ejecutables pero siempre con el archivo nombrado como x
Click to expand...

Si amigo, eso lo he entendido, pero al parecer el MDLC que tengo falla, esa imagen trasparente en DOS, dura 1 segundo y desaparece, te agradezco la traducción.
Pero para poder experimentar, necesito en primera instancia que alguien me facilite un MDLC que corra en Windows 7.

Blood_Hawk23 posiblemente me envie el que dispone, pero por las dudas, envíame el que tienes a la casilla que te envio por mensaje privado. Si aprendo a hacer esto, puedo hacer unos cuantos trabajos que hasta el momento no pude resolver.
 
Maxstuka said:
Si amigo, eso lo he entendido, pero al parecer el MDLC que tengo falla, esa imagen trasparente en DOS, dura 1 segundo y desaparece, te agradezco la traducci�n.
Pero para poder experimentar, necesito en primera instancia que alguien me facilite un MDLC que corra en Windows 7.

Blood_Hawk23 posiblemente me envie el que dispone, pero por las dudas, env�ame el que tienes a la casilla que te envio por mensaje privado. Si aprendo a hacer esto, puedo hacer unos cuantos trabajos que hasta el momento no pude resolver.
Click to expand...

Ok max! Primerovtu sistema debe ser 32 bit. Debes buscar en tu windows el simbolo de sistema DOS y pegar el ejecutable DOS en la carpeta mk mdlc y es este ejecutable DOS que debes usar con los comandos antes mencionados. No es la ventana dos que se muestra por un segundo. A mi me sucedia lo mismo.
 
Maxstuka said:
Si amigo, eso lo he entendido, pero al parecer el MDLC que tengo falla, esa imagen trasparente en DOS, dura 1 segundo y desaparece, te agradezco la traducción.
Pero para poder experimentar, necesito en primera instancia que alguien me facilite un MDLC que corra en Windows 7.

Blood_Hawk23 posiblemente me envie el que dispone, pero por las dudas, envíame el que tienes a la casilla que te envio por mensaje privado. Si aprendo a hacer esto, puedo hacer unos cuantos trabajos que hasta el momento no pude resolver.
Click to expand...

Max,

I sent what i have. I had to translate the page to read it.

I hope it helps. your have to do the administrative perms thing for it to work in Win7. hopefully it does work.

Question do you have it set so the Dos prompt will stay open. I just thought about that? I forget how to do it so i'll get back to you.

til later,
John
 
Blood_Hawk23 said:
Max,

I sent what i have. I had to translate the page to read it.

I hope it helps. your have to do the administrative perms thing for it to work in Win7. hopefully it does work.

Question do you have it set so the Dos prompt will stay open. I just thought about that? I forget how to do it so i'll get back to you.

til later,
John
Click to expand...

Found it.
>open the mk_mdl folder.
>right click on the mdlc icon.
>select properties.
>there are 8 tabs select program
>there is a check box near the bottom that says "Close on Exit" uncheck the box.

now when you run it it will stay open.

see if that helps.
 
mav said:
... you need to have the scasm.exe in the same directory as the "MDLC", then run in DOS or with .bat file.... does work on win7 32bit with NO issues.

http://www.scasm.de/dat/sca296.zip
Click to expand...

1)Thanks Blood_Hawk23

2)Gracias misson

3) This is the only that I can star but


running 1.jpgrunning 2.jpg

look next

try.jpg


C.Install the MDL Converter
1.Unzip the MDLC_Bxx.zip and Extract to your MDLC folder, example: C:\MDLC folder,
because MDLC support only 8 characters length pathname/ filename,

Ok! I did

please allow the C:\12345678\12345678\12345678.123 pathname/ filename format.

whats?????


2.modify the "MdlcPath=" to your MDLC folder in MDLC.INI file, example: "MdlcPath=C:\MDLC",
it will define the MDLC system files folder then you can run MDLC in any other folder,
the MDLC still could find MDLC system files normally.

Ok but not found!!!!!

3.Copy and Paste the MDLC.EXE, MDLC.INI and RTM.EXE 3 files to C:\WINDOWS\COMMAND folder for WINDOWS 98/ Me,
if you want use MDLC in anywhere.

I do not need mdlc in anywhere! ok
 
Last edited:
Blood_Hawk23 said:
Found it.
>open the mk_mdl folder.
>right click on the mdlc icon.
>select properties.
>there are 8 tabs select program
>there is a check box near the bottom that says "Close on Exit" uncheck the box.

now when you run it it will stay open.

see if that helps.
Click to expand...

Yeah I did it. in first time.

paso 2.jpg
 
You must log in or register to reply here.
Back
Top