P-3 Thread continued...

nPy6M.jpg


lDNKo.jpg


XEw8.jpg
 
Here's a quick run though of the mods I made using MdlMatxx so the P-3C can be used in FSX DX10 or P3dV2
I didn't spend a lot of time on this, it's very much a quick and dirty edit as the model is still in beta thing may well change.
It seems to work fine for me and I haven't found any problems, but there may well be something I've missed.

First and foremost, back up your original files!

Load up Mdlmatxx and load in the first MDL. All the MDLs will need editing, including the VC models.

Go though the list of materials on the left hand side and for each, check the value in the "Reflection Scale" box.

mdlmat1.jpg


If it's a one, change it to zero.

mdlmat2.jpg


then click the "Send modified material back" box

mdlmat3.jpg


When you done all the materials, click "Save Updated MDL"

mdlmat4.jpg


As I said, it's a rough edit. I haven't checked if all the materials need doing, so you may find some parts that need to be shiny or reflective may now not be.

This should work as described, but use at your own risk, I cannot be held responsible if your PC explodes, turns into a micro black hole or becomes self-aware.
 
DaveWG said:
. . . . . . .It seems to work fine for me and I haven't found any problems, but there may well be something I've missed.
First and foremost, back up your original files!
Load up Mdlmatxx and load in the first MDL. All the MDLs will need editing, including the VC models.
Go though the list of materials on the left hand side and for each, check the value in the "Reflection Scale" box.

If it's a one, change it to zero.

then click the "Send modified material back" box

When you done all the materials, click "Save Updated MDL"

As I said, it's a rough edit. I haven't checked if all the materials need doing, so you may find some parts that need to be shiny or reflective may now not be.
Click to expand...
Thanks for that Dave. Just a quick note for P3D_Ver2 users, it appears that the external model is fine, so "all mdls" isn't necessary as far as I can see, however the VC definitely needs these tweaks as aside from the main gauge panel, everything else has the "chrome appearance". That "interior mdl" seems to be all you need to tweak if you are using P3D_Ver2. I also did not touch any LOD1 material that was labeled as a "$gauge" as I assumed that would remove any reflection from the gauges. The rest that had the "1" I changed to "0" and the VC looks great and that one interior model will fix all the VC's as they are all aliased to that mdl file. Thanks again to Dave for making that available.
 
Download not working. If I put a check on both downloads and click on the download button at the top, nothing happens. Same thing if I try one at a time.
 
it wouldnt download for me unless i right clicked on the box with the title in it..workd fine then
 
Older Repaints not compatible with V3 Beta

I tried to add one of the older 2.9 repaints to the new V3 Beta and most of it show except for the zinc Chromate on the landing gear doors (yellow).
Is there any way to fix this? I got this repaint (VP6) from flightsim.

View attachment 4072
 
gray eagle said:
I tried to add one of the older 2.9 repaints to the new V3 Beta and most of it show except for the zinc Chromate on the landing gear doors (yellow).
Is there any way to fix this?
Click to expand...

P-3C_ORION_FSX\Texture.USNAVY_Common\p3_eg01_t.bmp

gear_door.jpg

This part is the texture and part present in FSX version.
 
falcon409 said:
Thanks for that Dave. Just a quick note for P3D_Ver2 users, it appears that the external model is fine, so "all mdls" isn't necessary as far as I can see, however the VC definitely needs these tweaks as aside from the main gauge panel, everything else has the "chrome appearance". That "interior mdl" seems to be all you need to tweak if you are using P3D_Ver2. I also did not touch any LOD1 material that was labeled as a "$gauge" as I assumed that would remove any reflection from the gauges. The rest that had the "1" I changed to "0" and the VC looks great and that one interior model will fix all the VC's as they are all aliased to that mdl file. Thanks again to Dave for making that available.
Click to expand...

Odd. When I tried it in P3dV2 it had the high reflective surfaces same as FSX DX10.
 
gray eagle said:
So, If I understand this, that file you show there would have to be repainted to match the dark blue of the VP6 repaint that was done for the older V2.9 correct?
Click to expand...

You should repaint it so that you enjoy it. There are other some parts and texture that you must revise in the same way.
 
You must log in or register to reply here.
Back
Top