-
Please see the most recent updates in the "Where did the .com name go?" thread. Posts number 16 and 17.
-
Special Server Maintenance
Just when you think you have everything running some what better...
You get a message from the Hosting company. Short story they need to move us to a new server. I have been working with them to plan a good date for all concerned. Here is what we have come up with as a schedule.
- November 4th 17:00 -5UTC shut off the forums and start backup proceedures. During this time there will be no access to the forums or the Resource Section.
- November 5th Continue with Backups and download same until complete.
- November 6th 7:00 turn over server to hosting company to move system to new server
- November 7th - 8th restore backups and upgrade forum software.
If all goes well we should be back online on November 8th.
To keep you updated we will post updates on AVSIM forums.
Thank you for your support.
Attention all DC-3 fans !
- Thread starter Javis
- Start date
TuFun
Riveter
cavaricooper
SOH-CM-2023
Manfred, Jan et al-
Whilst waiting for this piece de resistance I have surrendered to the longing that has long resided within me. I did download the V2 C47 as well as the brilliant American Flagship and Royal Aircraft Establishment repaints (there are so many more that are fantastic and on the list). Then I added TuFun's sounds to them both.
Since doing so I have stepped back into 1950s aviation and flown all around the London Control Zone, flying SIDS and STARs on raw data. Trundling down the glide at 110 while mixing in with the fast movers that usually maintain 160 until 4 has been enlightening and nerve-wracking for all- the controller learning to fit in a new flow, the others in the stack flying in, and for me in the cockpit working props and throttle all the way down to an ultra short turnoff to vacate promptly!
I have rediscovered Trevor Morton's site and am greedily assimilating everything about DC3 operations I can in preparation for the ultimate ride.... Soon I hope
?
Not until I flew out or Orbx's Ketchikan, through the vast vertical spaces of their Southern Alaska and into Orbx Juneau using ASN did I fully realize the new possibilities in Flight Simulation that await me. Some of you may remember my friend Captain Bill Odell's Alaska Journeys we co wrote on AvSim a decade ago? I hope to one day resurrect that series, with the DC3 (not a Beaver this time), writing from a freight drivers cold, cold perspective. I have long been a Boeing driver (it pleases me that in a way the DC3 is now a Boeing product) and my Fat Girl (B747-400) will always have a huge spot in my heart. I shared it with the baby 737 and now a portion must go to your splendid creation gents!
You all- starting with Manfred Jahn, but extending to each artist, sound and paints- and now culminating in Jan's masterpiece- will collectively give the FSX world a present like no other. I am most grateful.
Carl F. Avari-Cooper
Whilst waiting for this piece de resistance I have surrendered to the longing that has long resided within me. I did download the V2 C47 as well as the brilliant American Flagship and Royal Aircraft Establishment repaints (there are so many more that are fantastic and on the list). Then I added TuFun's sounds to them both.
Since doing so I have stepped back into 1950s aviation and flown all around the London Control Zone, flying SIDS and STARs on raw data. Trundling down the glide at 110 while mixing in with the fast movers that usually maintain 160 until 4 has been enlightening and nerve-wracking for all- the controller learning to fit in a new flow, the others in the stack flying in, and for me in the cockpit working props and throttle all the way down to an ultra short turnoff to vacate promptly!
I have rediscovered Trevor Morton's site and am greedily assimilating everything about DC3 operations I can in preparation for the ultimate ride.... Soon I hope
?Not until I flew out or Orbx's Ketchikan, through the vast vertical spaces of their Southern Alaska and into Orbx Juneau using ASN did I fully realize the new possibilities in Flight Simulation that await me. Some of you may remember my friend Captain Bill Odell's Alaska Journeys we co wrote on AvSim a decade ago? I hope to one day resurrect that series, with the DC3 (not a Beaver this time), writing from a freight drivers cold, cold perspective. I have long been a Boeing driver (it pleases me that in a way the DC3 is now a Boeing product) and my Fat Girl (B747-400) will always have a huge spot in my heart. I shared it with the baby 737 and now a portion must go to your splendid creation gents!
You all- starting with Manfred Jahn, but extending to each artist, sound and paints- and now culminating in Jan's masterpiece- will collectively give the FSX world a present like no other. I am most grateful.
Carl F. Avari-Cooper
Last edited:
WHOA!!!!! What a wonderful surprise..........however, as always Jan........EXTREMELY dedicated and beautiful work!!!!!!
You could never be Thanked enough for all your contributions to the Flightsimming Community!!!!!
Many, MANY Thanks!!!!!!!!!!
Cheers,
Steve R.
SgtMajor, USMC (Retired)
You could never be Thanked enough for all your contributions to the Flightsimming Community!!!!!
Many, MANY Thanks!!!!!!!!!!
Cheers,
Steve R.
SgtMajor, USMC (Retired)
I also love the C-47 and was lucky enough to get a few hours flying one back in 1957-58 out of March AFB.
As many have already said: this one is tops. I have tried them all beginning with MAAM (some years back) and none compare to Jan's.
Now I have run across Carl F.'s "I have rediscovered Trevor Morton's site" and am curious enough to ask WHAT it is and WHERE do I find it?
Looking forward to the update.
Regards to all
Neal H (currently snowed in and waiting for the plows)
As many have already said: this one is tops. I have tried them all beginning with MAAM (some years back) and none compare to Jan's.
Now I have run across Carl F.'s "I have rediscovered Trevor Morton's site" and am curious enough to ask WHAT it is and WHERE do I find it?
Looking forward to the update.
Regards to all
Neal H (currently snowed in and waiting for the plows)
cavaricooper
SOH-CM-2023
Neal... Try douglasDC3 dot com
Carl
Carl
Carl,
You might want to look at DC-3 Airways; they're a VA totally devoted to the Three and the DC-4/ C-54. They also have many actual, old school Route Packages to fly.
They also put on the annual DC-3 World Rally, which just finished up a couple of weeks ago.
http://dc3airways.com/
Alan
You might want to look at DC-3 Airways; they're a VA totally devoted to the Three and the DC-4/ C-54. They also have many actual, old school Route Packages to fly.
They also put on the annual DC-3 World Rally, which just finished up a couple of weeks ago.
http://dc3airways.com/
Alan
cavaricooper
SOH-CM-2023
Thanks Alan! I will check them out.... Just not sure a VA is for me.....the old school routes sound interesting though....
Carl
flyinggoldfish
Charter Member
In fairness DCA is more of a virtual DC-3 pilots' club than a VA proper... Part of the reason I joined, VA's aren't for me either!
Alky
Charter Member
They also have a lot of old pharts kicking around that actually flew DC-3's in their time.
Carl,
Simon and Alky are right; DCA feels more like a big 'gathering' of DC-3 aficionados instead of a 'true' VA. They do have requirements, but it's very easy to qualify since the Three is so easy to fly! They also have great Download and Links sections, too.
Which DC-3 are you using? Watch out for Simon; he's a pretty prolific (and awesome) repainter!
(Don't forget my DCA repaints for MJ's FS9 version, Simon!)
Alan
Simon and Alky are right; DCA feels more like a big 'gathering' of DC-3 aficionados instead of a 'true' VA. They do have requirements, but it's very easy to qualify since the Three is so easy to fly! They also have great Download and Links sections, too.
Which DC-3 are you using? Watch out for Simon; he's a pretty prolific (and awesome) repainter!
(Don't forget my DCA repaints for MJ's FS9 version, Simon!)
Alan
cavaricooper
SOH-CM-2023
Thanks, very much appreciated- I will check it out- but we ought to return this thread to its focus- the AWESOME VINTAGE VC THAT JAN IS WORKING ON!
I for one am salivating at the thought the upholsterers may be nearing the end of their arduous task
Carl Avari-Cooper
I for one am salivating at the thought the upholsterers may be nearing the end of their arduous task
Carl Avari-Cooper
Last edited:
tailspin45
Members +
Drudge work for drones?
I have no particular artistic skill but know my way around Photoshop, Wordpress, and other tools. Is there anything I, or like-minded, aficionados can contribute to make this awesome VC development process easier (i.e. quicker)? Repetative drudge work we can handle? I know that adds a layer of administration/management. But many hands ....
I have no particular artistic skill but know my way around Photoshop, Wordpress, and other tools. Is there anything I, or like-minded, aficionados can contribute to make this awesome VC development process easier (i.e. quicker)? Repetative drudge work we can handle? I know that adds a layer of administration/management. But many hands ....
Took a while but they did,Carl, they did. Here are a few screenies at Peculiar POV :
Hydraulic pressure gauges and cowlflaps control valves (WIP):
More stuff to add sticking out of the padding but i did sent the upholsterers home to make room for the painters. Noisy bunch, singing all the time, the're from Volendam....
Manfred sent me a link to a fantastic site where models can be uploaded and viewed and zoomed in and out from all directions. For devs also great to detect flaws in the mesh. Of course i had a go with the current VVC and it looks pretty good but sofar not good enough for public viewing. Untextured stuff looks quite uninteresting in the viewer so i want to do something about that first. As soon as i think it's worth something i'll post a link.
Hope you like the padding, guys.
cheers,
jan
Sounds good to me, tailspin, but let me think about that, Ok ? Anything particular that you have in mind ? There's really not that much repetative texture work at hand, you see...
cheers,
jan
Bill Kestell
Charter Member
Gettin' more itchy and twitchy every day!