Cant Z506 Series of MVG3d

[gaucho_59]

Chau gauchazo....

Acabo the regresar the Alemania... estuve alli desde Junio...
Una pesadilla... un clima de estierco... fuimos a Polonia (Auschwitz) y la Rca. Checa que nunca habia estado...
Cuando regrese'.. encontre que entraron ladrones en casa in me afanaron los dos computers
(con monitores the 27 pulgadas... SUPEREQUIPADOS... como 25,000 USD entre todo lo que
se llevaron... (joyas, cristal, etc.) pero lo peor... los archivos de mis illustraciones...
Menos mal que habia archivado gran parte en un Book storage HD
Que te voy a decir... una suerte de mierda!
estoy trabajando con el Toshiba laptop que me lleve' a Alemania...
Alla mi mujer havia comprado un Apple Mac... (29" screen) de 2,500 mangos... por suerte (pero tendre que
usar Photoshop con ese)... espero mi hijo me mande un Photoshop para installar de garron...
fantastico para trabajar graficas.. pero no es un PC... (yo uso PSP que solo funciona en un PC)
tengo que remplazar los que se llevaron con un PC bien de bute... Espero que el seguro me de sufficiente morlacos...

Un abrazo grande, y felices fiestas a vos y la familia... Posiblemente vayamos a Uruguay y nos veremos en el 2015..

Carlos

 

[beepee]

Pitch control knobs and pointers on the pitch gauges ?

Hi Beepee,
Please, where are the pitch contol knobs and the pointers on the pitch gauges (EP/MP/LP/S/S_LW) ? Without them You cannot control the Prop pitch and the engines RPM......

Hi mvg3d,

The pitch control knobs and the pointers on the pitch gauges do not show on the Z506 VC views I posted, because the VC views where taken in FS2002, and these gauges do not appear in this version of FS (I do not have FS 2004....)
Strangely, the pitch control knobs and the pointers on the pitch gauges appear in the FS2002 VC view of the Cant Z1007!!!!
Z 1007

Z506

Please mvg3d, can you tell me what are the names of those gauges in the Z506 and in the Z1007 panel config files, I will need this info to configure the 2D and VC panels in the CFS2 version of the birds that Misson is working on.
Thanks

Beepee

 

[kelticheart]

Triple WOW!

Another great conversion project!

Thank you very much gents for your combined efforts! Italian Wings are truly taking off in CFS2 lately!

Cheers!
KH

 

[mvg3d]

Hi Beepee,
The knobs are animated in GMax, but they are textured with a 2D gauge :
These are the enters in '506's panel.cfg (NOT in post-war version):

gauge17=Z506B_MVG!pcmeneg_rpm1, 924,284,100,100
gauge18=Z506B_MVG!pcmeneg_rpm2, 924,389,100,100
gauge19=Z506B_MVG!pcmeneg_rpm3, 924,494,100,100

The pointers aren't 2D gauges, but ONLY GMax animations (the same used in '1007's VC)
'1007 hasn't pitch knobs.
Greetings
Manuele

Merry Christmas from Orthodox GREECE !!!

 

[misson]

Gurí!!

Acabo the regresar the Alemania... estuve alli desde Junio...
Una pesadilla... un clima de estierco... fuimos a Polonia (Auschwitz) y la Rca. Checa que nunca habia estado...
Cuando regrese'.. encontre que entraron ladrones en casa in me afanaron los dos computers
(con monitores the 27 pulgadas... SUPEREQUIPADOS... como 25,000 USD entre todo lo que
se llevaron... (joyas, cristal, etc.) pero lo peor... los archivos de mis illustraciones...
Menos mal que habia archivado gran parte en un Book storage HD
Que te voy a decir... una suerte de mierda!
estoy trabajando con el Toshiba laptop que me lleve' a Alemania...
Alla mi mujer havia comprado un Apple Mac... (29" screen) de 2,500 mangos... por suerte (pero tendre que
usar Photoshop con ese)... espero mi hijo me mande un Photoshop para installar de garron...
fantastico para trabajar graficas.. pero no es un PC... (yo uso PSP que solo funciona en un PC)
tengo que remplazar los que se llevaron con un PC bien de bute... Espero que el seguro me de sufficiente morlacos...


Un abrazo grande, y felices fiestas a vos y la familia... Posiblemente vayamos a Uruguay y nos veremos en el 2015..


Carlos

Eso te pasa por tener tantas casas jajaja! ( yo no puedo hablar mucho! vivo en una y estoy construyendo otra!).
Que te voy a decir? Yo no se si te dije que me dedico a la seguridad electrónica, no tenés un sistema de camaras cctv a tu celular y sistema de alarmas?? , acá en tus pagos la cosa está muy violenta, y no es broma!!.
Pero bueno venite y comemos algo en el mercado del puerto! avisame!
Feliz navidad para vos también ! un abrazo gaucho!
Mario

 

[beepee]

Cfs2 z506 panel wip

HI mvg3d
Thank you for the informations they will be very helpful for making the CFS2 panel config file and the CFS2 "mvg3d" style gauges...
Hi Misson
in the FS2004 Z506 models
==>the pitch knobs are animated in GMax and textured with a 2D gauge in the FS2004 model
==>the pitch pointers aren't 2D gauges, but ONLY GMax animations (the same used in '1007's VC)

Misson: Are the pitch knobs and the pitch pointers animated in the VC panel of your CFS2 converted models ?

Mission,
As you asked me in a private message here is the Z506 2D panel I am working on.

The gauges are part of the panel bitmap as I made it from a FS2002 VC view (and most of the mvg3d gauges show in FS2002)
Still a lot of work before the CFS2 Z506 panel is finished, the CFS2 gauges in mvg3d style are going hard to make....

Cheers

and a merry Christmas to all SOH people
Beepee

 

[Shessi]

Beautiful work there BP, really look forward to finished package of ac and panel.

Have a good Christmas!


Cheers

Shessi

 

[dvslats]

I agree Shessi, the Vc looks fantastic.



On the bottom side, (of the plane) the wake fx are finished.

Dv

 

[Shessi]

And looking very nice as well Dave....

Cheers


Shessi

 

[misson]

HI mvg3d
Thank you for the informations they will be very helpful for making the CFS2 panel config file and the CFS2 "mvg3d" style gauges...
Hi Misson
in the FS2004 Z506 models
==>the pitch knobs are animated in GMax and textured with a 2D gauge in the FS2004 model
==>the pitch pointers aren't 2D gauges, but ONLY GMax animations (the same used in '1007's VC)

Misson: Are the pitch knobs and the pitch pointers animated in the VC panel of your CFS2 converted models ?

Mission,
As you asked me in a private message here is the Z506 2D panel I am working on.

The gauges are part of the panel bitmap as I made it from a FS2002 VC view (and most of the mvg3d gauges show in FS2002)
Still a lot of work before the CFS2 Z506 panel is finished, the CFS2 gauges in mvg3d style are going hard to make....

Cheers

and a merry Christmas to all SOH people
Beepee

Beepee !! thank u for the hard work that you are puting in this project.

I knew from the begining that this would be a real chalenge, because MVG planes are in diferent ways not easy to convert. The panel is one of the hard work to do.
All cfs2 users apreciate ur eforts
Cheers
Mario

 

[misson]

I agree Shessi, the Vc looks fantastic.



On the bottom side, (of the plane) the wake fx are finished.

Dv

Dave !!! i Told ya ! u are the man for this work , I lost my patient with ACM , Thank u!

Cheers
Mario

 

[misson]

Gunner turret and bomb bay!

I ve tried before to make work such animations without succes in the begining.
Problem was some animation names that makemdl does not recognice correctly.
Today dvslats gave me some ideas , and correct animations names to test in gmax.

Now this animations are working also.
For extend gunner turrets (shift + g)
For open bomb bays (shift+ b) or spoilers key.
Thank u Dave again!

 

[gaucho_59]

A little more work on the panel... wide screen 2D



(Misson and Manuele *) Great work guri!!! You all are doing a fantastic job with Manuele's creation...
I just got going on a wide screen version of the panel... this one with a little more perspective...

Still a WIP... should be finished shortly...

 

[mvg3d]

(Misson and Manuele *) Great work guri!!! You all are doing a fantastic job with Manuele's creation...
I just got going on a wide screen version of the panel... this one with a little more perspective...

Still a WIP... should be finished shortly...

Hi Gaucho,
This is the panel for C.R.D.A.Cant.Z.1007bis, not for the '506......
Have a Merry Christmas ....

 

[dvslats]

I ve tried before to make work such animations without succes in the begining.
Problem was some animation names that makemdl does not recognice correctly.
Today dvslats gave me some ideas , and correct animations names to test in gmax.

Now this animations are working also.
For extend gunner turrets (shift + g)
For open bomb bays (shift+ b) or spoilers key.
Thank u Dave again!

You got it working Mario! Excellent and good job in gmax.

 

[mvg3d]

(Misson and Manuele *) Great work guri!!! You all are doing a fantastic job with Manuele's creation...
I just got going on a wide screen version of the panel... this one with a little more perspective...

Still a WIP... should be finished shortly...

Hi Carlos,
Both the planes ('1007 & '506) were entirely wooden construction, the ordinates had no holes......

 

[gaucho_59]

It is back to the drawing board... lol

Hi Carlos,
Both the planes ('1007 & '506) were entirely wooden construction, the ordinates had no holes......

Will get that corrected on my revision...
Thanks again Manuele.
Carlos

 

[gaucho_59]

CANT Z 1007bis 2D panel corrected

Hi Carlos,
Both the planes ('1007 & '506) were entirely wooden construction, the ordinates had no holes......

Hope this is more like it... Thanks again for the corrections... add any others you see need fixing
Carlos

 

[mvg3d]

Hi Carlos,
Take a look at the FS2004 section.

 

[gaucho_59]

?????



I don't understand... the FS2004 SECTION... do you mean the forum???
Please explain... and if so... which posting?