Aeroplane Heaven has released the Heinkel 111 P2. Check out the link below.
[url]https://www.aeroplaneheaven.com/product_heinkel.php [/URL]
[url]https://www.aeroplaneheaven.com/product_heinkel.php [/URL]
-
There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.
If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.
Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.
The Staff of SOH
Aeroplane Heaven HE-111 P2 Released
- Thread starter stovall
- Start date
pilto von pilto
Members +
For those of you in the EU PCaviator have got their shop up quicker than the rest so you can buy from there. The others will flow on and will be enabled once they get their shops up!
YoYo
SOH-CM-2023
The plane is beauty done. I havent now to enough time to test all things (He-111 must waits a little, for the next few weeks) but what I noticed and this is my request also 
.
PBR is to big for me (or PBR effects on textures). In some aspects:
- I cant find good antialisting for this model (outside), (I use AA: SSAAx4 as my standard and with this AA looks perfect for all models) but this textures of He-111 cause the model dosent look good (he has a lot of shimmering, not like the others) from distance. Perhaps too many details of PBR effect for me. It looks good only on screenshot, without move. I know, it costs a lot of time but personally Id like to have option (this or less, soft PBR)
- in some angle the textures looks like rusty effects, examples below (dusk, down), full brown. It looks very strange and like issue.
So any chance to have optional textures for P3Dv4.5 with less PBR effects?
.PBR is to big for me (or PBR effects on textures). In some aspects:
- I cant find good antialisting for this model
(outside), (I use AA: SSAAx4 as my standard and with this AA looks perfect for all models) but this textures of He-111 cause the model dosent look good (he has a lot of shimmering, not like the others) from distance. Perhaps too many details of PBR effect for me. It looks good only on screenshot, without move. I know, it costs a lot of time but personally Id like to have option (this or less, soft PBR)- in some angle the textures looks like rusty effects, examples below (dusk, down), full brown. It looks very strange and like issue.
So any chance to have optional textures for P3Dv4.5 with less PBR effects?
bazzar
Charter Member 2018
It all depends on your settings. Remember P3D is not full PBR yet, it is a kind of a workaround. If you are using tweaks and settings for other aircraft, you may need to alter those for this one. Personally, I have never seen the Heinkel look the way you have it. The actual PBR on this one is really quite moderate. It is nearly impossible to set up a texture set to suit all people. I would suggest going through your lighting and any other third party shader tweaks you have and experiment.
YoYo
SOH-CM-2023
Baz, I havent any "special" settings here (with lighting):
Those screenshots was taken at dusk "with the sun" and reflections are brown, rusty.
For me its a problem of channel on outside textures of He-111 with PBR effect.
I dont know, too agressive maybe?
But the biggest problem for me is shimmering on the model with this textures (even high level of AntiAliasing cant solve it) and textures on the outside always shimmer (I think too many details on PBR texture or they are too agressive).
Maybe download option for users of P3Dv4.4-5 with less effect (more like FSX quality)?
I didnt notice this problem on models with PBR in P3Dv4.5: ATS Broussard, default Maule and F-16, Dino's F-35.....
It doesnt look good for me.
Have a nice day!
bazzar
Charter Member 2018
Well, as I say, we are not seeing what you are. Neither are many of our customers. You can always run the non-PBR version in 4.5 and see if you prefer that.
We will be issuing a small patch with the pitot tube restored (it fell off) so we will try a different level of PBR then.
We will be issuing a small patch with the pitot tube restored (it fell off) so we will try a different level of PBR then.
pilto von pilto
Members +
I thought one 'pilto von pilto' had run amok with the weathering (again) ............
This is me toned down. IF I had my way you'd need a tetanus shot just to look at the pictures.
wombat666
Administrator
This is me toned down. IF I had my way you'd need a tetanus shot just to look at the pictures.
Had them recently.
My GP is a sadist!
YoYo
SOH-CM-2023
Well, as I say, we are not seeing what you are. Neither are many of our customers. You can always run the non-PBR version in 4.5 and see if you prefer that.
We will be issuing a small patch with the pitot tube restored (it fell off) so we will try a different level of PBR then.
Thank You Baz and pilto von pilto !
UnknownGuest12
New member
Bought it…
Previously contacted AH Help Desk about the missing pitot (later found a post about that) and got an immediate answer. After a brief flight contacted them once more asking about that flashing/bouncy exaust effect, how to remove or change it since just doesn't look real, imho they must improve this effect. Again an immediate, helpfull answer…
That I call excellent service. Now going to use a lot of ink to print the manual...
Previously contacted AH Help Desk about the missing pitot (later found a post about that) and got an immediate answer. After a brief flight contacted them once more asking about that flashing/bouncy exaust effect, how to remove or change it since just doesn't look real, imho they must improve this effect. Again an immediate, helpfull answer…
That I call excellent service. Now going to use a lot of ink to print the manual...
A quick look so far, a few minor things
im seeing what Yoyo is trying to explain but IMHO its not that bad, im also seeing the bomb animation in reverse when i click bomb drop off, a missing spinner at times and additionally some pbr or spec map inconstancies with the left fuse vs the right side on at least 1 paint thus far
Ive given up on trying to embed the video with the in post view, be F-ed if i can remember how
https://www.youtube.com/watch?v=m4Mh4Bgh5zo&feature=youtu.be
im seeing what Yoyo is trying to explain but IMHO its not that bad, im also seeing the bomb animation in reverse when i click bomb drop off, a missing spinner at times and additionally some pbr or spec map inconstancies with the left fuse vs the right side on at least 1 paint thus far
Ive given up on trying to embed the video with the in post view, be F-ed if i can remember how
https://www.youtube.com/watch?v=m4Mh4Bgh5zo&feature=youtu.be
Last edited:
YoYo
SOH-CM-2023
Good to see that my eyes not bad
.About reversed drop of bomb: https://youtu.be/Ch6oouryEAI?t=18 .
Its ok (with high RPM) but they are too slow for me (it could be x3 times faster).
bazzar
Charter Member 2018
We have now issued a patch to all vendors. Existing customers will need a complete re- install. We have toned down the PBR effects for those that hate them and I found the pitot tube lying under the table alongside the beer crates. No idea how it got there.
The anomaly that affects the right and left fuselage sides we cannot (as yet ) explain. However, it does go away when you switch to another livery and back.
For those wondering about those exhaust effects, they are timed correctly to the firing order for a DB601 V12.
The anomaly that affects the right and left fuselage sides we cannot (as yet ) explain. However, it does go away when you switch to another livery and back.
For those wondering about those exhaust effects, they are timed correctly to the firing order for a DB601 V12.
Attachments
i have no prob with the way they drop, its only when you toggle stop, they go back into the model as seen at 0:43 when i toggled stop releasing
bazzar
Charter Member 2018
The interior is only part PBR at present. There needs to be a lot more improvement in P3D's rendering of PBR before we go full in the VC. So far we are denied the use of other channels which provide far more subtle effects. P3D's rendering is quite brutal. We can only hope that V5 will prove better.
YoYo
SOH-CM-2023
Thank You for new file. I downloaded 1.1 from PCAvaitor however (PBR effect is less now) this rusty effect is present still:
Ok, but I found this file in Texture folder and I'll do this I like for myself :- ))).
Btw.
What about the view? Does it looks right? I feel like something is wrong with scale:
Horisontal flight. See Yoke position here and in IL-2 BoX. If I 'll go up the 2/3 view to front will be covered by front panel and I dont see horizontal line.
Ok, but I found this file in Texture folder and I'll do this I like for myself :- ))).
Btw.
What about the view? Does it looks right? I feel like something is wrong with scale:
Horisontal flight. See Yoke position here and in IL-2 BoX. If I 'll go up the 2/3 view to front will be covered by front panel and I dont see horizontal line.