Ant's T-28B & C Released

May I ask how one gets the 10% discount? I bought my "D" at FS Pilotshop but trying to get the B/C, there is no option for "D" owners.

I did download the updated "D". Thanks Ant!
 
Dimus said:
Thanks VCN-1! You're right! I went there and got it. Downloading now.
Click to expand...

Another example of comparision shopping for the best value. Way to go my friend :victorious:. I was one of the beta testers for these airplanes and may I strongly suggest that all users thoroughly read the manuals :02.47-tranquillity:.

RD
 
Well if FSS are not going to update the install I may have to purchase elsewhere.
 
Last edited:
Update on the retailers situation.

PC Aviator USA, Just Flight, Simmarket and FS Pilot Shop all have the T-28B/C available and the update for the T-28D to version 2.

There was a bit of a SNAFU with the user codes with PC Aviator USA but that should be sorted by now.

I've sent a support ticket reminding Flightsimstore about the T-28B/C last night and haven't heard anything back from them.

And I've heard nothing from PC Aviator Australia either.

If I haven't heard anything from Flightsimstore by tomorrow I will look at creating an updater for the T-28D and putting that on my website so that people who bought the original T-28D from FSS or PC Aviator Australia can at least update their copies to version 2 (the updater will require a valid copy of the T-28D be already installed and the original user code for the T-28D).
 
Thanks Ant! Great service. I just purchased the B/C from PC Aviator US with no issues. Looking forward to updating the D model. Shame that FSS isn't updating their inventory. The D model is not the only purchase I've made via FSS that I've not been able to update.

Mike
 
FSS has finally updated the "D" model(where I got the original). It's showing at 160.35mb. Don't know about the "B" & "C" versions as I bought them from Just Flight.

edit: Oops!! Spoke too soon. The 160mb is showing for a new version but the download area still has ver 1.10 in the bin.
 
Last edited:
I just checked the FSS website where I bought the T28D. It does show the new version can be bought.
I checked my account for the update and while it shows the 1.10 version as racartron mentioned, I downloaded it anyway to see what happened. It still downloads the old version.
Lucky I still have 97 downloads left.

Maybe they will get it straightened out by the weekend.
 
Well, I'm having the same bad experience with FSS as everyone else.

They are now selling the B/C model and the updated D model, but for those of us who purchased version 1.10 of the D model there is no update.

I can also attest that they have no responded to my e-mail. I have just sent another one, but I'm not holding my breath.

Sorry about the problems, Anthony. I just love the Trojan, but any update or future purchase will just have to wait.
 
Last edited:
Oh what fun being a developer is.

Thanks so much to everyone for being so patient. It is wonderful that not one person has sent me a rude email throughout this whole ordeal.

I will get onto making that patch for the D model and upload it in a few hours time to my website.

Hopefully, FSS will read the support tickets and fix things up with the correct link to V2 for existing T-28D customers.

As mentioned before the old T-28D version 1 and 1.1 were around 112MB in size while version 2 is around 165MB (which seems to be the most reliable way to tell the difference between versions, even though I number versions some retailers change the filenames).

It seems that the D Version 2 and B/C are available at fss now but there seems to be a problem for those who already bought the T-28D and they can't download the new V2.

Still no word from PC Aviator Australia.
 
Patch for T-28D version 1.0 and 1.1 to upgrade to version 2.0 is now available from my website:

www.antsairplanes.com/downloads/AntsT28DV200patch.zip

You must have a valid T-28D version 1.0 or 1.1 already installed (the installer will check this) and you need your user code for the original T-28D.

Only those people who are having problems downloading the T-28D version 2 from their retailers account should use this patch (ie FSS or PC Aviator Australia customers). The installer from the retailers is a standalone installer, while this patch require the T-28D version 1.0 or 1.1 already be installed.

If you have installed the T-28D into P3D you should be able to point the installer to the P3D directory. Otherwise, run the T-28D 1.0 or 1.1 installer into a dummy FSX folder, then run the patch and point it into the dummy FSX folder. From there you can copy across the necessary files to P3D.
 
anthony31 said:
Patch for T-28D version 1.0 and 1.1 to upgrade to version 2.0 is now available from my website:

www.antsairplanes.com/downloads/AntsT28DV200patch.zip

You must have a valid T-28D version 1.0 or 1.1 already installed (the installer will check this) and you need your user code for the original T-28D.

Only those people who are having problems downloading the T-28D version 2 from their retailers account should use this patch (ie FSS or PC Aviator Australia customers). The installer from the retailers is a standalone installer, while this patch require the T-28D version 1.0 or 1.1 already be installed.

If you have installed the T-28D into P3D you should be able to point the installer to the P3D directory. Otherwise, run the T-28D 1.0 or 1.1 installer into a dummy FSX folder, then run the patch and point it into the dummy FSX folder. From there you can copy across the necessary files to P3D.
Click to expand...

Many thanks, Anthony !
 
The C is the best fun. I had a ball last evening making traps on the "Shangri La" that came with John's Navy Mustang package.

I tried installing it in P3D v2.0. It installed fine but it causes CTDs after a few minutes. This happens with many other complicated addons though and I understand that it was not developed for v2.0.

It runs great in FSX with DX10 though.
 
D version is fantastic
B and C is just Brilliant

Thank you Ant's for both the updated vers 2 of the D
and for doing the B&C models Love Them

A must have Purchase for 2013
 
anthony31 said:
Patch for T-28D version 1.0 and 1.1 to upgrade to version 2.0 is now available from my website:

www.antsairplanes.com/downloads/AntsT28DV200patch.zip

You must have a valid T-28D version 1.0 or 1.1 already installed (the installer will check this) and you need your user code for the original T-28D.

Only those people who are having problems downloading the T-28D version 2 from their retailers account should use this patch (ie FSS or PC Aviator Australia customers). The installer from the retailers is a standalone installer, while this patch require the T-28D version 1.0 or 1.1 already be installed.

If you have installed the T-28D into P3D you should be able to point the installer to the P3D directory. Otherwise, run the T-28D 1.0 or 1.1 installer into a dummy FSX folder, then run the patch and point it into the dummy FSX folder. From there you can copy across the necessary files to P3D.
Click to expand...
Thank you, Anthony.
 
Anthony

Thank you for the patch. FSS update for the D is still not available.

EDIT: Installed the patch from Anthony and had no difficulties at all
Again Thanks!


VCN-1
 
Last edited:
Thank you Anthony!
V 2 upgrade worked perfectly....

Many thanks and Seasons Greetings :santahat:
Rick
 
You must log in or register to reply here.
Back
Top