Converts fine, except wheel position, that can be fixed easily through a slight modification in the "contact points" section of cfg file:
[contact_points]
max_number_of_points = 9
point.0 = 1, -16.91, 0, -3.30, 1500, 0, 0.5, 60, 0.4, 21.5, 0.60, 3, 4.5, 0, 241.48, 271.67
point.1 = 1, 2.23, -4.34, -6.10, 1500, 1, 1.1, 0, 0.5, 41.05, 0.55, 6, 6.0, 2, 241.48, 271.67
point.2 = 1, 2.23, 4.34, -6.10, 1500, 2, 1.1, 0, 0.5, 41.05, 0.55, 7, 8.5, 3, 241.48, 271.67
point.3 = 2, 7.6, 0, -1.489, 1800, 0, 0, 0, 0, 0, 0, 0, 0, 0
point.4 = 2, -18.168, 0.003, -1.188, 1800, 0, 0, 0, 0, 0, 0, 0, 0, 0
point.5 = 2, -18.421, 0, 5.283, 1800, 0, 0, 0, 0, 0, 0, 0, 0, 0
point.6 = 2, -0.732, 0, -2.023, 1800, 0, 0, 0, 0, 0, 0, 0, 0, 0
point.7 = 2, -1.482, -18.789, 0.035, 1800, 0, 0, 0, 0, 0, 0, 0, 0, 0
point.8 = 2, -1.473, 18.762, 0.009, 1800, 0, 0, 0, 0, 0, 0, 0, 0, 0
static_pitch= 8.50
static_cg_height= 5.30
gear_system_type = 1
tailwheel_lock = 1
Other points needing improvement, but far over my weak capacities, are the cockpit position ( rear cockpit is open when front one is closed) and position in the rear cockpit of rear fire-wall, appearing ahead of co-pilot in the Trainer version.
Comes with many different textures ( at least 7 or 8 German, an Hungarian, two Czeck and a French textures )
DP file needed after conversion, Pepe.....
Bom dia.
