• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

AW Spitfire

Maxstuka said:
hi acwai,
I just wanted to tell you that the new models that you made have a gray 2d object on the cockpit panel
when viewed in the aircraft selection menu. I did a fix to the ki-84, but with the other models the
material editor could not read this object and I could not correct it, so it happened with the fw190A,
if you can eliminate this object before finalizing the plane it would be great

View attachment 82338

thanks
Click to expand...

Allen had answered this same question. It is a CFS2 bug. If you go to fly the aircraft once, then the gray areas are gone when you select the aircraft again.

There are two ways to fix this problem. The clear panel where the gauges are mapped on has to be rectangular. You can use an oversized clear panel to map it all the way outside the VC cockpit, this way, you can use the entire VC cockpit.

2nd method: use a smaller clear panel, then it won't be outside the fuselage. All the VC cockpit panels are elliptical, so you won't be able to place the gauges to 100% of the VC cockpit panel. You can do it if you use lots of smaller clear panels.

I prefer to use method 1, which allows me to use all the VC cockpit panel. If you pay attention to the writings on top of the oxygen gauges, it is quite readable and extends all the way to the edge of the VC cockpit. If I use the 2nd method, you can not display the writings all the way to the edge of the VC cockpit.
 
The aircraft has been uploaded.

Rami and Kurt: Please delete the first AW SPITFIRE zip file. I have uploaded a new one.

Special thanks to Frederic and DJ Diggs for beta testing the aircraft.

Thanks for your interest in this aircraft.

 
Aw spitfire

225716192753561798.jpg

A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - British

Description: VERSION 3.0 April 2021

New features:

new model with new texture files.
new 2D cockpit with 1600 x 1200 bmp file
higher resolution VC gauges with 2X in size
glass effect (optional topper.bmp, remove this file if you like the semi opaque glass)

Visual model : acwai

Textures: modified by me by using texture files from a CFS3 Spitfire painted by Nigel Dickinson. I used some of the original art work by Alessandro Biagi, and Phanis. I have included
some textures files from the Seafire_MKIII (A.F.Scrub, email: af_scrubbypc@hotmail.com).

Damage profiles: acwai, weapons by DJ Tiggs

Airfile by: acwai, it was tuned to fight against the stock CFS2 Zero aircraft in the multi-player mode. You can use any Spitfire airfiles.

2D panel: screen captured from the VC

Gauges: I modified some of the gauges, I don't know the original designers of some of those gauges. They are mostly from Alphasim.

Sound files: Frédéric BOURMAUT

DISCLAIMER

Use this program at you own risks, the author is not responsible for any damages done to your computer.

This is a copyrighted freeware program. FREE DISTRIBUTION ONLY. You may upload or post this unmodified aircraft to any web sites. This program can not be posted where a fee of any kind is required or even nagged for. This includes disk distribution or any other kind of fees. It can not be included in a commercial package.

Have fun!

Andrew

To check it out, rate it or add comments, visit AW SPITFIRE
The comments you make there will appear in the posts below.
 
Hi All,

The Download Link to Andrew Wai's Spitfire is corrupted !!
You get ERROR 404 all the time.

Regards,
1150
 
When I was uploading the first and second Spitfire AW SPITFIRE and AW SPITFIRE-1), I got an error message. I am not too sure whether it was uploaded correctly.
 
Hi Andrew,

Yes, it looks like the files are corrupted. Can you upload the package again?

Thanks,
Kevin
 
Buona fortuna !!!.
I am very interested to see your model .

[FONT=Verdana, sans-serif]Cheers.[/FONT]
 
Aw spitfire-1

886616193639124104.jpg

A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - British

Description: VERSION 3.0 April 2021

New features:

new model with new texture files.
new 2D cockpit with 1600 x 1200 bmp file
higher resolution VC gauges with 2X in size
glass effect (optional topper.bmp, remove this file if you like the semi opaque glass)

Visual model : acwai

Textures: modified by me by using texture files from a CFS3 Spitfire painted by Nigel Dickinson. I used some of the original art work by Alessandro Biagi, and Phanis. I have included
some textures files from the Seafire_MKIII (A.F.Scrub, email: af_scrubbypc@hotmail.com).

Damage profiles: acwai, weapons by DJ Tiggs

Airfile by: acwai, it was tuned to fight against the stock CFS2 Zero aircraft in the multi-player mode. You can use any Spitfire airfiles.

2D panel: screen captured from the VC

Gauges: I modified some of the gauges, I don't know the original designers of some of those gauges. They are mostly from Alphasim.

Sound files: Frédéric BOURMAUT

DISCLAIMER

Use this program at you own risks, the author is not responsible for any damages done to your computer.

This is a copyrighted freeware program. FREE DISTRIBUTION ONLY. You may upload or post this unmodified aircraft to any web sites. This program can not be posted where a fee of any kind is required or even nagged for. This includes disk distribution or any other kind of fees. It can not be included in a commercial package.

Have fun!

Andrew

To check it out, rate it or add comments, visit AW SPITFIRE-1
The comments you make there will appear in the posts below.
 
Reply...

Andrew,

Looks like a fantastic model; looking forward to flying it! :encouragement:
 
What a wonderful Spitfire set! Thank you so much!

Now I do have a question. Why is the boost gauge in the VC different from that in the 2D panel? When I set boost, the reading between the two gauges don't match for me.
 
Browncoat said:
What a wonderful Spitfire set! Thank you so much!

Now I do have a question. Why is the boost gauge in the VC different from that in the 2D panel? When I set boost, the reading between the two gauges don't match for me.
Click to expand...

Thanks everyone for the nice comments.

I had uploaded the first Spitfire and had to replace the Panel.cfg file. I uploaded the 2nd AW SPITFIRE and asked Rami to delete the first one. He had accidentally deleted both AW SPITFIRE. I had just uploaded AW SPITFIRE again.


Browncoat,

I have checked, the Panel.cfg file uses the same gauge in 2D and VC cockpit. The Spitfire Version 3 uses a new AW SPIT_BOOST gauge. You need to delete all the old gauges named AW SPIT_BOOST_0001.gau. It seems like CFS2 always generate a new gauge named ****_0001, ****_0002, and ****_003 gauges when the VC uses the same gauge.

I hope that fixes the problem.

I am goning to upload another Spitfire later on this week.

Andrew
 
Aw spitfire

761816194541152402.jpg

A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - British

Description: VERSION 3.0 April 2021

New features:

new model with new texture files.
new 2D cockpit with 1600 x 1200 bmp file
higher resolution VC gauges with 2X in size
glass effect (optional topper.bmp, remove this file if you like the semi opaque glass)

Visual model : acwai

Textures: modified by me by using texture files from a CFS3 Spitfire painted by Nigel Dickinson. I used some of the original art work by Alessandro Biagi, and Phanis. I have included
some textures files from the Seafire_MKIII (A.F.Scrub, email: af_scrubbypc@hotmail.com).

Damage profiles: acwai, weapons by DJ Tiggs

Airfile by: acwai, it was tuned to fight against the stock CFS2 Zero aircraft in the multi-player mode. You can use any Spitfire airfiles.

2D panel: screen captured from the VC

Gauges: I modified some of the gauges, I don't know the original designers of some of those gauges. They are mostly from Alphasim.

Sound files: Frédéric BOURMAUT

DISCLAIMER

Use this program at you own risks, the author is not responsible for any damages done to your computer.

This is a copyrighted freeware program. FREE DISTRIBUTION ONLY. You may upload or post this unmodified aircraft to any web sites. This program can not be posted where a fee of any kind is required or even nagged for. This includes disk distribution or any other kind of fees. It can not be included in a commercial package.

Have fun!

Andrew

To check it out, rate it or add comments, visit AW SPITFIRE
The comments you make there will appear in the posts below.
 
AcWai said:
Browncoat,

I have checked, the Panel.cfg file uses the same gauge in 2D and VC cockpit. The Spitfire Version 3 uses a new AW SPIT_BOOST gauge. You need to delete all the old gauges named AW SPIT_BOOST_0001.gau. It seems like CFS2 always generate a new gauge named ****_0001, ****_0002, and ****_003 gauges when the VC uses the same gauge.

I hope that fixes the problem.

I am goning to upload another Spitfire later on this week.

Andrew
Click to expand...


That worked like a charm! Thank you!
 
Aw spitfire-2

130516197473878119.jpg

A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - British

Description: VERSION 3.0 April 2021

This zip file has the missing AW SPIT_PRIMING gauge and 3 sets of texture files.

Visual model : acwai

Textures: modified by me by using texture files from a CFS3 Spitfire painted by Nigel Dickinson. I used some of the original art work by Alessandro Biagi, Phanis, and me. I have included some textures files from the Seafire_MKIII (A.F.Scrub, email: af_scrubbypc@hotmail.com).

Damage profiles: acwai, weapons by DJ Tiggs

Airfile by: acwai, it was tuned to fight against the stock CFS2 Zero aircraft in the multi-player mode. You can use any Spitfire airfiles.

2D panel: screen captured from the VC

Sound files: Frédéric BOURMAUT

DISCLAIMER

Use this program at you own risks, the author is not responsible for any damages done to your computer.

This is a copyrighted freeware program. FREE DISTRIBUTION ONLY. You may upload or post this unmodified aircraft to any web sites. This program can not be posted where a fee of any kind is required or even nagged for. This includes disk distribution or any other kind of fees. It can not be included in a commercial package.

Have fun!

Andrew

To check it out, rate it or add comments, visit AW SPITFIRE-2
The comments you make there will appear in the posts below.
 
Aw spitfire-3

220816197475572214.jpg

A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - British

Description: VERSION 3.0 April 2021

This zip file has 3 sets of texture files.

Visual model : acwai

Textures: modified by me by using texture files from a CFS3 Spitfire painted by Nigel Dickinson. I used some of the original art work by Alessandro Biagi, Phanis, and me. I have included some textures files from the Seafire_MKIII (A.F.Scrub, email: af_scrubbypc@hotmail.com).

Damage profiles: acwai, weapons by DJ Tiggs

Airfile by: acwai, it was tuned to fight against the stock CFS2 Zero aircraft in the multi-player mode. You can use any Spitfire airfiles.

2D panel: screen captured from the VC

Sound files: Frédéric BOURMAUT

DISCLAIMER

Use this program at you own risks, the author is not responsible for any damages done to your computer.

This is a copyrighted freeware program. FREE DISTRIBUTION ONLY. You may upload or post this unmodified aircraft to any web sites. This program can not be posted where a fee of any kind is required or even nagged for. This includes disk distribution or any other kind of fees. It can not be included in a commercial package.

Have fun!

Andrew

To check it out, rate it or add comments, visit AW SPITFIRE-3
The comments you make there will appear in the posts below.
 
AW SPITFRE-4.zip

710316204892733000.jpg

A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - British

Description: VERSION 3.0 May 2021

This zip file has 3 sets of texture files.

Visual model: Acwai.

Textures: modified by me by using texture files from a CFS3 Spitfire painted by Nigel Dickinson. I used some of the original art work by Alessandro Biagi, Phanis, and me. I have included some textures files from the Seafire_MKIII (A.F. Scrub, email: af_scrubbypc@hotmail.com).

Damage profiles: Acwai.

Airfile by: Acwai, it was tuned to fight against the stock CFS2 Zero aircraft in the multi-player mode. You can use any Spitfire airfiles.

2D panel: screen captured from the VC

Sound files: Frédéric BOURMAUT

DISCLAIMER: Use this program at you own risks, the author is not responsible for any damages done to your computer.

This is a copyrighted freeware program. FREE DISTRIBUTION ONLY. You may upload or post this unmodified aircraft to any web sites. This program can not be posted where a fee of any kind is required or even nagged for. This includes disk distribution or any other kind of fees. It can not be included in a commercial package.

Have fun!

Andrew

To check it out, rate it or add comments, visit AW SPITFRE-4.zip
The comments you make there will appear in the posts below.
 
You must log in or register to reply here.
Back
Top