-
Please see the most recent updates in the "Where did the .com name go?" thread. Posts number 16 and 17.
Carenado D18 released
- Thread starter Roger
- Start date
tgycgijoes
Members +
After Pulling My Hair Out
Well, after much open FSX close FSX look agains...here is my U.S. Army C45F (Hamilton Standard Propellers) finally. I took a little liberty with my repaint to be I think more authentic markings.
I will upload it to the Library in a little while.
Well, after much open FSX close FSX look agains...here is my U.S. Army C45F (Hamilton Standard Propellers) finally. I took a little liberty with my repaint to be I think more authentic markings.
I will upload it to the Library in a little while.
Attachments
Hi,
the cockpit images above are of a real old one, we won't be able to replicate that, unfortunately. They didn't have panels covering the roof in them. I found a lot of good images from around the sixties that are do-able. I was looking for Air America aircraft, and found that most D18s used by them were ex service C-45s. There were some that had grey interior with a grey instrument panel, and some had a black instrument panel. Doing both is very easy, once the PSD is set up..
Cheers,
Mark
the cockpit images above are of a real old one, we won't be able to replicate that, unfortunately. They didn't have panels covering the roof in them. I found a lot of good images from around the sixties that are do-able. I was looking for Air America aircraft, and found that most D18s used by them were ex service C-45s. There were some that had grey interior with a grey instrument panel, and some had a black instrument panel. Doing both is very easy, once the PSD is set up..
Cheers,
Mark
tgycgijoes
Members +
See
Shows ya how much I KNOW! LOL!!! I am trying to make military pilots instead of the civilian ones. In my Carenado C208B they have a pilot for the Brazilian Air Force and also the UAE pilot in military jackets I am going to try and work with. I have some stuff in the works and will share that with ya all here.
Shows ya how much I KNOW! LOL!!! I am trying to make military pilots instead of the civilian ones. In my Carenado C208B they have a pilot for the Brazilian Air Force and also the UAE pilot in military jackets I am going to try and work with. I have some stuff in the works and will share that with ya all here.
tgycgijoes
Members +
Pilots
With the model the way its been designed, even though there are six files that relate to pilots and if they would have used one of the other ones we could have substituted the pilots from the Cessna Grand Caravan Carenado did or even their T34 Mentor pilots but they created a new file with both pilots in it called PILOTS and if you open it up, to me it looks like a jigsaw puzzle. I send a support request to Carenado but their reply was that they do not assist any modifications to their aircraft to check the forums but there is nothing in the forums because this is a new aircraft and I don't remember ever seeing this PILOTS file and I have quite a number of their aircraft. Disappointing to me but not the end of the world. Unless you zoom in very closely on the cockpit from outside you can't tell what the pilots are wearing.
With the model the way its been designed, even though there are six files that relate to pilots and if they would have used one of the other ones we could have substituted the pilots from the Cessna Grand Caravan Carenado did or even their T34 Mentor pilots but they created a new file with both pilots in it called PILOTS and if you open it up, to me it looks like a jigsaw puzzle. I send a support request to Carenado but their reply was that they do not assist any modifications to their aircraft to check the forums but there is nothing in the forums because this is a new aircraft and I don't remember ever seeing this PILOTS file and I have quite a number of their aircraft. Disappointing to me but not the end of the world. Unless you zoom in very closely on the cockpit from outside you can't tell what the pilots are wearing.
tgycgijoes
Members +
Military Pilots
Just got a reply back from Carenado Support that they will put my suggestion for military pilots in the D18S as a future modification and will send notification (to all those who own it) when it is implemented by them. See, it pays to complain sometimes even though it's a little thing.
Just got a reply back from Carenado Support that they will put my suggestion for military pilots in the D18S as a future modification and will send notification (to all those who own it) when it is implemented by them. See, it pays to complain sometimes even though it's a little thing.
Thanks for your efforts! Great to read this.
Here's a video of a mil cockpit:
Here's a video of a mil cockpit:
tgycgijoes
Members +
ROFL
I just noticed that someone mounted the Yokes upside down, either on the museum version above or the real flying thing in the video. I'd suppose that the real one is the right way.
Cheers,
Mark
I just noticed that someone mounted the Yokes upside down, either on the museum version above or the real flying thing in the video. I'd suppose that the real one is the right way.
Cheers,
Mark
Bushpounder
SOH-CM-2026
I've seen real world Beech 18s with the oval on the top or bottom. I don't remember if it had to do with model or preference. Too long ago.
Don
Don
tgycgijoes
Members +
Check on the Beech Restoration Site I posted above and ask the question. I would almost guarantee that they will have the answer to this which is very interesting.
OK, the day textures are done, also for the cabin in Air America colors. I pretend it's a VIP transport 
Cabin:
Cabin:
Last edited:
henrystreet
Charter Member
OK, the day textures are done for the day textures, also for the cabin in Air America colors. I pretend it's a VIP transport
Wowzer, looking fantastic!
tgycgijoes
Members +
Patient
Patiently waiting thank you so much for all your efforts on it.
Patiently waiting thank you so much for all your efforts on it.
tgycgijoes
Members +
Thread Dead
I had been waiting for the updated interior and kinda forgot this thread. THEN my computer "crashed and burned". After hours of efforts and a factory default reinstall of just Windows 7 and drivers, I was able to diagnose that the HDD has dead sectors. I found a new Hard Disk but have to wait for payday in 3 weeks to get it. In the meantime, I looked high and low for file backups. Sadly all my AAF training fields are gone except for Hawthorne which was in the Dropbox.
I found by the grace of the Good Lord that I DID backup this C45 US Army texture so I am uploading it to the Warbird library as i was supposed to do. If you want a copy check it out later when its approved.
Richard
I had been waiting for the updated interior and kinda forgot this thread. THEN my computer "crashed and burned". After hours of efforts and a factory default reinstall of just Windows 7 and drivers, I was able to diagnose that the HDD has dead sectors. I found a new Hard Disk but have to wait for payday in 3 weeks to get it. In the meantime, I looked high and low for file backups. Sadly all my AAF training fields are gone except for Hawthorne which was in the Dropbox.
I found by the grace of the Good Lord that I DID backup this C45 US Army texture so I am uploading it to the Warbird library as i was supposed to do. If you want a copy check it out later when its approved.
Richard
Repaint Alligator Airways.. here it is if you are looking..f
https://forum.aerosoft.com/index.php?/files/file/4809-carenado-beech-d18s-vh-sau-alligator-airways/
Bob M.
cheers Ralf
https://forum.aerosoft.com/index.php?/files/file/4809-carenado-beech-d18s-vh-sau-alligator-airways/
Bob M.
Can someone do a repaint for A Carendo D18 in Piedmont
I have and I have talked with Milton Shupe regarding the orig D18S he has done and nothing better (well maybe..lol) but the problem I have is the original won't taxi correctly. I am using it as an AI. All of the Piedmont D18S are in the hanger for now because of that. There is a repaint that was done by:GLENN BAKER for the aircraft done by Beech D 18 by Milton Shupe, Scott Thomas and André Folkers
Even the Carendo goes around in a circle at start and then catches on. It could be my afcad....ADE for KINT that I have redone.
The aircraft cfg section is like this: for the repaint. The repaint is here: https://flyawaysimulation.com/downloads/files/16388/fs2004-piedmont-airlines-beech-18/
[fltsim.x]
title=Beech NOVC
sim=D18S
model=novc
panel=novc
sound=
texture=pa
kb_checklists=Beech18_check
kb_reference=Beech18_ref
atc_id=N41V
atc_id_color = 0xffffffff
atc_parking_types = RAMP
atc_parking_code = 1
ui_manufacturer=Beechcraft MSA
ui_type="D18S NOVC"
ui_variation="Piedmont Air"
description="B18 NOVC"
atc_heavy=0
atc_airline=
atc_flight_number=
description=
The paint probably can't be used unless someone who is knowledgeable to redo the bmps or just do one from scratch.
This is it:
https://imgur.com/UJOREL9
Would consider paying someone to do it for the Carendo.... I really don't think I have the skills to do this..lol
If someone knows how or where to find a newer paint..let me know. I wrote Glenn Baker but no response. Don't know if he is even still with us..unless someone knows him.
Thanks,
warmest Regards,
Bob M.
I have and I have talked with Milton Shupe regarding the orig D18S he has done and nothing better (well maybe..lol) but the problem I have is the original won't taxi correctly. I am using it as an AI. All of the Piedmont D18S are in the hanger for now because of that. There is a repaint that was done by:GLENN BAKER for the aircraft done by Beech D 18 by Milton Shupe, Scott Thomas and André Folkers
Even the Carendo goes around in a circle at start and then catches on. It could be my afcad....ADE for KINT that I have redone.
The aircraft cfg section is like this: for the repaint. The repaint is here: https://flyawaysimulation.com/downloads/files/16388/fs2004-piedmont-airlines-beech-18/
[fltsim.x]
title=Beech NOVC
sim=D18S
model=novc
panel=novc
sound=
texture=pa
kb_checklists=Beech18_check
kb_reference=Beech18_ref
atc_id=N41V
atc_id_color = 0xffffffff
atc_parking_types = RAMP
atc_parking_code = 1
ui_manufacturer=Beechcraft MSA
ui_type="D18S NOVC"
ui_variation="Piedmont Air"
description="B18 NOVC"
atc_heavy=0
atc_airline=
atc_flight_number=
description=
The paint probably can't be used unless someone who is knowledgeable to redo the bmps or just do one from scratch.
This is it:
https://imgur.com/UJOREL9
Would consider paying someone to do it for the Carendo.... I really don't think I have the skills to do this..lol
If someone knows how or where to find a newer paint..let me know. I wrote Glenn Baker but no response. Don't know if he is even still with us..unless someone knows him.
Thanks,
warmest Regards,
Bob M.
Hope whoever might paint one for you gets it more accurate to Piedmont's scheme than shown here, there's a nice Piedmont DC-3 paint on the web for the MAAM DC-3, perhaps can be adopted from that ?, however Piedmont never flew this a/c, they flew- DC-3, F-27, M404, FH-227B, YS-11, B721, B732, in this scheme.