CERA - BELL 222 FSX SP2 RELEASED

jeansy said:
deciding what to do with this one

image18f.png
Click to expand...


I love the bare metal, a couple of different registrations and your set to go !! :applause:
 
Incoming very quick and easy one for the Kiwis.
Based off of an AS365 Dauphin that was once part of the New Zealand aviation scene.

24mtgtf.jpg
 
(Cera_Bell222B_FSX_v1.5.exe 155.365 Ko) Hello,

I write this message because I meet a problem with the Bell 222, I possess the version 1.5 (Cera_Bell222B_FSX_v1.5.exe 155.365 Ko) of this addon and when I use the pop-up window (Shift+1) for put in Cold & Dark my Bell 222 all seems OK.
But when I start the motor N°1 and I turn my throttle I can see the arrow of the gauge of the Motor N°1 up to 100%.
But with this same gauge the arrow of the RPM rotor up or move just a little. After have starting my two motors the rotor don't turn normaly and when I watch the arrow of the RPM of the rotor up to 10 or 20%...
Please anybody can inform me if you too you meet the same problem that me ?

For the moment it's the most important problem that I found with this addon...

A great thank's in advance for your help, best regards, Olivier.

PS: I'm very sorry for ly poor English.
 
D-HTIM...

Hello,
I help the repainter if it's possible.
Here i see a Deutch 222, if the work isn't to hard, can you make it please ?

HSD Hubschrauber Sonder Dienst
Bell 222B
Dortmund - Wickede (DTM / EDLW)
Germany, February 24, 2006
D-HTIM
http://www.airliners.net/photo/HSD-...36832/L/&sid=cef87d6255569fa7aa03b96a32d69021
http://www.airliners.net/photo/HSD-...70568/L/&sid=cef87d6255569fa7aa03b96a32d69021
http://www.airliners.net/photo/HSD-...13259/L/&sid=cef87d6255569fa7aa03b96a32d69021

Many Thanks from France. :ernae:

Skulleader,
Avant de lancer la turbine, passes par la vue du collectif, et mets les deux bagues au premier cran ou légerement tournées...
Ensuite, tu reviens en 3D, puis tu peux démarrer.

Good flight at all :wavey:
 
I'll look again later today, but I thought that this livery was already included in the base package provided by Cera....


moune said:
Hello,
I help the repainter if it's possible.
Here i see a Deutch 222, if the work isn't to hard, can you make it please ?

HSD Hubschrauber Sonder Dienst
Bell 222B
Dortmund - Wickede (DTM / EDLW)
Germany, February 24, 2006
D-HTIM
Click to expand...
 
Wow Sorry, yes sir, it's in the base package, i believe it's my age, a little :sleep: !!
I applause your work, a pleasure for the eyes ... :medals:
serge. :salute:
 
moune said:
Wow Sorry, yes sir, it's in the base package, i believe it's my age, a little :sleep: !!
I applause your work, a pleasure for the eyes ... :medals:
serge. :salute:
Click to expand...

Its easy to do. I started to paint one of the base package liveries on the Cera bell 412! Felt really stupid when someone pointed out it was already there!
 
Ha ha ! ...
One should not say that, the brain ages some time more quickly than the body, I have just noted it with my depend :redf: ...

But, with this wonderful hélicop, i've now put the auto-pilot for long flight, also, i've put the update auto-pilot of Dirk Fassbender (the Super Puma) to can make stationnaires... here :
http://www.dirkfassbender.de/autopilot.html

That thing now in the helicop :
http://imageshack.us/f/651/81037964.jpg/

Good flight, serge.
 
In Flight Reset Issue

Just wanted to see if anyone else encountered this. On approach to Niagara Falls for a sightseeing tour (at about 1500 ft and 90 kts), I saved my flight. As I continued, I decided to make an approach and landing at one of the small islands atop the falls. As I approached the intended island to land, I hit an invisible obstruction which cause a crash of the aircraft. When the flight reset to my saved approach point, the helicopter systems and engines were off and rotors not turning. Apparently the reset also reset the aircraft back to a cold pre-starting state. Due to low altitude, and rotors not turning, autoration was out of the question, so I conveniently hit the Y panic key and slewed the aircraft to a higher altitude thinking that I could try restarting the engines. I called up the Shift 1 key and selected Ready to Fly, but the aircraft did not respond. All systems remained off and rotors were still locked. Needless to say, I immediately bailed out! Any one else try this?

Thanks
 
sarwulf said:
Just wanted to see if anyone else encountered this. On approach to Niagara Falls for a sightseeing tour (at about 1500 ft and 90 kts), I saved my flight. As I continued, I decided to make an approach and landing at one of the small islands atop the falls. As I approached the intended island to land, I hit an invisible obstruction which cause a crash of the aircraft. When the flight reset to my saved approach point, the helicopter systems and engines were off and rotors not turning. Apparently the reset also reset the aircraft back to a cold pre-starting state. Due to low altitude, and rotors not turning, autoration was out of the question, so I conveniently hit the Y panic key and slewed the aircraft to a higher altitude thinking that I could try restarting the engines. I called up the Shift 1 key and selected Ready to Fly, but the aircraft did not respond. All systems remained off and rotors were still locked. Needless to say, I immediately bailed out! Any one else try this?

Thanks
Click to expand...

I haven't tried this myself, but I believe that this addon has some special code involved that allows more realistic flight dynamics, namely...autorotations (though I haven't tried that either haha), so I bet that trying to start in mid-air like that is messing the code up and causing the problems. As always, I could be completely and utterly wrong on this too!

In other news, I am completely out of repaint ideas, other than for a tribute livery for a band that I enjoy that has a new album coming out on October 11th. Still trying to figure out how to go about doing that one, but other than that, any ideas on liveries (that aren't extreme)?
 
Mt_Flyer said:
I love the bare metal, a couple of different registrations and your set to go !! :applause:
Click to expand...

Hello,
For me too, i like your barre metal, not real, but charming... :jump:
(The Europeen Netherland Military registration possible ?)...

Fantastic work Mr jeansy :medals:
Good flight at all, serge.
 
You must log in or register to reply here.
Back
Top