• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

Cessna U206G Soloy Mark I Turbine Conversion project

Status
Not open for further replies.
Nice bird.

24980347mm.jpg


Thomas
 
Great news. Got full support of creating 3D stuff in VC of GTN750/650. Anyway, if you purchased F1 GTN 750/650 suite, it will be possible to handle them with 3D knops in vc.

Thomas
 
TiAr said:
Great news. Got full support of creating 3D stuff in VC of GTN750/650. Anyway, if you purchased F1 GTN 750/650 suite, it will be possible to handle them with 3D knops in vc.

Thomas
Click to expand...

I'm sad there isn't realityxp support but the developer being mia I am not surprised. Looks like I have to save up for the GTN after all I've been holding out because I love the RXP 430/530 design better.
 
b747 said:
I'm sad there isn't realityxp support but the developer being mia I am not surprised. Looks like I have to save up for the GTN after all I've been holding out because I love the RXP 430/530 design better.
Click to expand...

If you or somebody else give me the proper code of the 3D switches or knops I am willing to look on it (and ask for permission). As I wrote before, I have no idea how this Suite works. Perhaps it will work with the code I use, maybe not. I have no possibility to test it. And there is another possibility to use RXP if the bottoms and switches are not running - you can control it certainly via 2D. The places for RXP 530 and 430 in VC are there. Very sorry.

Thomas
 
TiAr said:
If you or somebody else give me the proper code of the 3D switches or knops I am willing to look on it (and ask for permission). As I wrote before, I have no idea how this Suite works. Perhaps it will work with the code I use, maybe not. I have no possibility to test it. And there is another possibility to use RXP if the bottoms and switches are not running - you can control it certainly via 2D. The places for RXP 530 and 430 in VC are there. Very sorry.

Thomas
Click to expand...

I know it is not your fault. I have no idea about coding at all. My only guess is some developer that has created the RXP units in their addons such as RealAir, Milviz, A2A, Carenado, probably knows what you are after.
 
TiAr said:
If you or somebody else give me the proper code of the 3D switches or knops I am willing to look on it (and ask for permission). As I wrote before, I have no idea how this Suite works. Perhaps it will work with the code I use, maybe not. I have no possibility to test it. And there is another possibility to use RXP if the bottoms and switches are not running - you can control it certainly via 2D. The places for RXP 530 and 430 in VC are there. Very sorry.

Thomas
Click to expand...

Hello Thomas I emailed a great help for many addons, Bert who I hope can answer some of your questions, or put you in touch with someone who can, to get Reality-XP support. If you are able to do this it would be really great. I know I am not alone in preferring and using RealityXP avionics. I definitely don't want to cause a delay of this so sometime down the road if you are able to work with him and get RXP into your great aircraft that would be great. Thank you for this amazing work.
 
Don´t worry about a delay, I am not in a hurry. I am in contact with Bert. I am quite sure, you will get a further avionics suite with RXP GNS530/430... I am on work about it.

25044085qp.jpg


Anyway, some are asking about pictures of the release candidates. One of it is D-EJNB, a skydiver variation with bigger main wheels, which are FAA certificated. Aircraft is currently in Service.

25043996tx.jpg


Thomas
 
RXP integration working nicely

attachment.php


Just tested a version with dual RXP GNS units in the panel.

Looks great, and works flawlessly!

Bert
 
Last edited:
Bert, thanks for your help in getting the RXP integration.

Thomas, would you be able to show off the virtual cockpit night lighting options? Do we have independent gauge backlighting and dome lighting available?
 
First, RXP is on board. Thank you Bert. I purchased Software today. Great choice!

25102701xg.jpg



B747, question about independent night lighting. No, there is no control available. I tried it out for a long period, but with no success. But I am fair enough to show pictures.

25102702ap.jpg

Back lighting of most of textures are working.

25102703ak.jpg

But if you switch off dome lights, 2D Gauges are grotty.

Thomas
 
Thanks! As long as the dome is a separate switch I can turn off at night because it's too bright when flying in the dark sometimes that is great. Thank you very much. I really love the reality XP avionics even though it is an older program and not supported by the developer it simulates the most popular gps models. And I personally like operating them better than the GTN series plus it has DME readouts the GTN does not! If you are interested I have navigation data from cycle 1601 a couple months ago, and terrain and obstacle data from 2015 you can use. Just private message me and Ill send it through email.

What does that "cargo hauler" button do is that on the panel to switch the loading and textures of the model?
 
Cargo Hauler Botton: Yes you are right. If you start the tundra wheel version, freight is on board. By pushing the cargo hauler sign on main, you will have an empty cabin. See pictures on page 8...

Thomas
 
TiAr said:
Cargo Hauler Botton: Yes you are right. If you start the tundra wheel version, freight is on board. By pushing the cargo hauler sign on main, you will have an empty cabin. See pictures on page 8...

Thomas
Click to expand...

Could that button be part of the popup window where we configure the model, rather than permanently on the panel?
 
No, lol - the skydivers won´t not much amused. It is a feature only for Tundra var. I thought about it, but it is too much work for each variants. Think about different airfiles.

Thomas
 
Sometimes things are going wrong. I am fighting with a fatal PC error of my development pc. No booting secton found. But I have backups and my projects-files are on an external plate. Dont´t worry about Soloy project.

Thomas
 
Status
Not open for further replies.
Back
Top