• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

FCS Lancaster DOWNLOAD

Excellent job, Dan ! Wonderful to have the Lankie back in FSX ! :applause::ernae::applause:

Chiefy : Landinggear- , Flaps- and Boost Indicators are dead as a doornail. Can you have a look at that please ?? Thanks !

I'm also voting for a bit less glass reflection particularly re that yellow moon ( why was that round patch painted yellow anyway ? What was its function ? Any idea somebody ?... )

cheers,
jan
 
Javis said:
Excellent job, Dan ! Wonderful to have the Lankie back in FSX ! :applause::ernae::applause:

Chiefy : Landinggear- , Flaps- and Boost Indicators are dead as a doornail. Can you have a look at that please ?? Thanks !

I'm also voting for a bit less glass reflection particularly re that yellow moon ( why was that round patch painted yellow anyway ? What was its function ? Any idea somebody ?... )

cheers,
jan
Click to expand...

I figured out the landing gear, flaps and boost gauges need to have power switches turned on in the VC. The landing gear light switch is nestled at the top-center of the panel between the lights (a bit hard to see), the flaps gauge switch is way over near the oxygen gauges next to the fire warning switches and the boost coil switch is above the fourth boost gauge. That's the good news. However, the boost gauges don't go below zero when you throttle back even though they should go into the negative numbers (but they will go up to 22). Also, turning on the boost coil switch in the VC doesn't allow the 2D panel boost gauges to work.

Another switch issue I've noticed is the fuel tank switches don't seem to control the tanks they say they do. On the Mk. I (only) the Nav and VC lights don't come on (haven't checked the aircraft.cfg to see if it's missing light entries the others have just in case it's an easy fix). So, I'm compiling my list to forward to FCS support once I've finished exploring. It's a great looking plane that'll be all the nicer once the kinks are worked out.
 
Beautifully designed plane and textures. A great addon.

Was suprised to find internal shadows in the exquisite VC.

Disappointed that I've not found a bombay. I see I light to indicate if bombay is open but no switch to open it, if it exists on the model. The docs seem to accentuate the importance of the Lancs bombing role, so I'd expect at least a bombay and perhaps a view of some bombs within.
 
Try the rearmost silver handle on the port side of the pilot's seat. Very simple if you have trackIR, not so easy (I would imagine) without.
 
bomb bay

jimjones said:
Beautifully designed plane and textures. A great addon.

Was suprised to find internal shadows in the exquisite VC.

Disappointed that I've not found a bombay. I see I light to indicate if bombay is open but no switch to open it, if it exists on the model. The docs seem to accentuate the importance of the Lancs bombing role, so I'd expect at least a bombay and perhaps a view of some bombs within.
Click to expand...

Hi,

On the left top side of the pilot's seat you will find a large level (with tooltip) to open and close the bay doors! And yes a bomb load is present and also the front gunner changes role and is now visible at his blister.


Enjoy,


Paul
 
Thanks delta and ftl818 for the bombay hints. Have trackir but have not been using it on my initial view of this wonderful plane. My brief look thru the docs did not unveil these controls. Perhaps I overlooked that too in what seems mimimal discussion of these special animations. shift-e and shift-e-2 does open a window and a door.
 
LOl - your not the only one! It took me 2 days to find the leaver as it is not documented - great product all the same :jump:
 
gajit said:
LOl - your not the only one! It took me 2 days to find the leaver as it is not documented - great product all the same :jump:
Click to expand...

Yes, great aircraft, but the documentaion is sadly lacking.

Still, means a bit of investagative work on our part:jump:
 
jimjones said:
Perhaps I overlooked that too in what seems mimimal discussion of these special animations. shift-e and shift-e-2 does open a window and a door.
Click to expand...

I'll pass on your comments to those involved in the manual part of things.

Shift-e will open the pilot window (Exterior), shift-e-2 will open the entry door, and water rudder command will put a ladder up.

BR
Dan.
 
Thanks Dan for the Ladder up command.

Nice wheel detail!!

Lanc01.jpg


Yes, there are bombs in there.

Lanc02.jpg


Taking aim.

Lanc03.jpg


View from above.

Lanc04.jpg


Blockbuster.

Lanc05.jpg


Beautiful color, texture and bumps!!

Lanc06.jpg
 
Nice screen shots jimjones! It is a great looking model ~ lots of nice details.

Thanks for the key commands for the animations Dan.

To fix the Nav and cockpit lights on the Mk. Is, remove the extra [lights] header in the aircraft.cfg file. It's just above the second header and all the lights entries. I guess the first header with no entries under it causes the second set to be ignored.

Cheers,
Rick
 
From what I read, it looks that a great model has been a little comprimised by some rather shoddy 'packaging' at the end, not done by Dan.

Still, I am sure it is all fixable:applause:, any news on a paint kit????
 
RCAF_Gunner said:
I figured out the landing gear, flaps and boost gauges need to have power switches turned on in the VC.
Click to expand...

Alright! ( hatsssjooo!! ) :blind: :redf: Thanks, Gunner ! ( funny Avro guys, why would anybody *not* want to keep en eye on their gear and flaps position... ? )

the boost gauges don't go below zero when you throttle back even though they should go into the negative numbers (but they will go up to 22)
Click to expand...
Yes, i see that too..... Also with RPM levers at 100% RPM gauge does not indicate anything over 3000 while throttles are still far from full power...

So, I'm compiling my list to forward to FCS support once I've finished exploring. It's a great looking plane that'll be all the nicer once the kinks are worked out.
Click to expand...
Did you notice the strange brakes behaviour ? Tut says on take-off to hit the toebrakes, gently apply power until full, than release brakes. She will not hold on the brakes though. She will start rolling even before half power is reached. The strange thing is that she *will* hold on the brakes at full power.... :confused:

Hope you can take that along with your list too... ?:rolleyes:

Bummer that only the external cockpit windows can be opened, not the internal..... bet in the summer that greenhouse will be like an oven....

Good fun nontheless ! :mixedsmi: ( checking out three other Lanc soundsuites )

cheers,
Jan
 
Javis said:
Alright! ( hatsssjooo!! ) :blind: :redf: Thanks, Gunner ! ( funny Avro guys, why would anybody *not* want to keep en eye on their gear and flaps position... ? )

Yes, i see that too..... Also with RPM levers at 100% RPM gauge does not indicate anything over 3000 while throttles are still far from full power...

Did you notice the strange brakes behaviour ? Tut says on take-off to hit the toebrakes, gently apply power until full, than release brakes. She will not hold on the brakes though. She will start rolling even before half power is reached. The strange thing is that she *will* hold on the brakes at full power.... :confused:

Hope you can take that along with your list too... ?:rolleyes:

Bummer that only the external cockpit windows can be opened, not the internal..... bet in the summer that greenhouse will be like an oven....

Good fun nontheless ! :mixedsmi: ( checking out three other Lanc soundsuites )

cheers,
Jan
Click to expand...

My pleasure Jan.

I hadn't noticed the brake behavior ... I'll have to do some more testing tonight. :)

I think the props are OK. The Pilot's Notes list them as "Hydromatic" with a governed range of 3000 rpm down to 1800 rpm.

Dan mentioned a patch is in the works so I'm sure these glitches will get ironed out. I sent FCS an email with the issues I've noticed so far. Hopefully others are too.

Sure is nice having a native FSX Lancaster.

Cheers,
Rick
 
Just finished watching a Lancaster special on History channel, very good doco on it.

This offering looks the part
 
Since those reflections are horrendous with the lights on at night, I'd like to play with modifying them. However, ImageTools, DXTBmp and Corel Paint Shop Pro all refuse to open the file LancR0.dds. What software is needed to work on the alpha?
 
RCAF_Gunner said:
I think the props are OK. The Pilot's Notes list them as "Hydromatic" with a governed range of 3000 rpm down to 1800 rpm.
Click to expand...

Great tip, Rick ! Didn't expect to be able to read the Lancaster Pilot Notes just by Google'ing it.... :icon_eek: Jolly good, old chap ! :)

cheers,
Jan
 
jimjones said:
Since those reflections are horrendous with the lights on at night, I'd like to play with modifying them. However, ImageTools, DXTBmp and Corel Paint Shop Pro all refuse to open the file LancR0.dds. What software is needed to work on the alpha?
Click to expand...

Loads up fine in DXTBmp here, Jim. Did you check 'Load DDS image' before selecting it ?..

cheers,
Jan
 
You must log in or register to reply here.
Back
Top