• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

first class simulations lancaster

You're a very lucky man, to have been able to crawl all over her like that Ian:encouragement:

The Lancaster certainly wasn't built with comfort in mind, that's a certainty! One can only marvel at the fortitude and sheer guts those Bomber Crews had; hats off to them indeed:loyal:
ChipShop
 
The Lancaster certainly wasn't built with comfort in mind, that's a certainty
Click to expand...

Apparently the RAF crews of the first Liberators and Flying Fortresses delivered were highly impressed by the arm rests and cigarette lighters.
 
ChipShop said:
You're a very lucky man, to have been able to crawl all over her like that Ian:encouragement:

The Lancaster certainly wasn't built with comfort in mind, that's a certainty! One can only marvel at the fortitude and sheer guts those Bomber Crews had; hats off to them indeed:loyal:
ChipShop
Click to expand...
Caught the chaps on a week day , only wish I had the foresight to really photo it properly ... and had have had a better camera. (1986/7)
 
Nice to see the revival of the FCS Lancaster. If A2A would do one; 4 Merlins accusimmed....!

I too made B1 repaints a long time ago but never uploaded the finished paint. The painted windows (in my case also in the alpha channel and modified bump maps along with the longerons above the bomb bay doors) look realistic. Unfortunately the rest of the aircraft is of a late B1/B3 in terms of the wider paddle props instead of the needle type, wrong aerials and pitot tube.

2016-7-14_12-17-20-145.jpg2016-7-14_12-20-42-188.jpg


Paul
 
I stumbled across the feedback I sent to FCS when this bird first came out. Can anyone tell me if these have all been fixed (apologies for the long list !):

  1. Boost gauges incorrect - register about + 8 too high and never go negative
  2. Turn/Slip Indicator indicates wrong way
  3. A/C moves forward against brakes on half-power but not at full power
  4. A/C will only cruise satisfactorily in nose-up attitude
  5. Silver patches on props
  6. Requesting gear down above 15-kts has no effect, except gear light goes out. Then when speed drops to 150kts the gear comes down by itself.
  7. VC Altimeter needles incorrect (large needle should indicate 100s, small needle should indicate 1000s)
  8. Shadows from wire aerials on outside of a/c unrealistically large
  9. Cockpit reflections, particularly from yellow disc on pilot seat armour plate (pretty sure this was fixed)
  10. Unable to taxi turning with differential power and brakes. Can only turn using rudder.
 
Just installed Patch 1.0 and the readme indicates all is fixed afaict. I thought I had then noticed the dreaded yellow disc in the windshield!!

DaveQ
 
DickB said:
I stumbled across the feedback I sent to FCS when this bird first came out. Can anyone tell me if these have all been fixed (apologies for the long list !):

  1. Boost gauges incorrect - register about + 8 too high and never go negative
  2. Turn/Slip Indicator indicates wrong way
  3. A/C moves forward against brakes on half-power but not at full power
  4. A/C will only cruise satisfactorily in nose-up attitude
  5. Silver patches on props
  6. Requesting gear down above 15-kts has no effect, except gear light goes out. Then when speed drops to 150kts the gear comes down by itself.
  7. VC Altimeter needles incorrect (large needle should indicate 100s, small needle should indicate 1000s)
  8. Shadows from wire aerials on outside of a/c unrealistically large
  9. Cockpit reflections, particularly from yellow disc on pilot seat armour plate (pretty sure this was fixed)
  10. Unable to taxi turning with differential power and brakes. Can only turn using rudder.
Click to expand...

Just had a quick look at some of the things on your list.
1. The boost gauges DO go into negative and also into the red if you firewall it!
2. Forgot to look
3. Still the same
4. Not checked
5. This can be fixed by changing the properties using MDLMat.. otherwise, still present
6. Gear will come down whenever you select it
7. Works ok
8. Common an a great many models if you select aircraft cast shadows on itself (I don't use it)
9. Reflections look ok to me
10. You can turn on the ground using the throttles on the outers (which is how they'd have done it anyway). If you try and turn with all the throttles synchronised (eg, they all move together).. then you turn (as mentioned) with the rudder. If you want to speed the turn up.. use the rudder AND brakes to invoke differential braking.

ATB
DaveB:)
 
Thanks guys. Is the patch (or patches ?) still available anywhere ? As far as I can recall, I had an unofficial fix for the yellow disc but nothing else.
 
The patch is still available at the current seller of FCS products. I just bought it and the patch was there as well.

Very nice pictures of the interior Ian! I guess the US and the Brits had some different views on crew comfort.. Maybe the biggest problem with the Lancaster interior was that it was a lot more difficult to reach the jump exits compared to the two other RAF heavies.
 
big-mike said:
Is version 0.8.2611082255 the patched one?
Mike
Click to expand...

That's what my aircraft.cfg says Mike but it's difficult to tell if that's the patched number or not as the patch runs as an exe and there's no way of knowing exactly what it's done.
ATB
DaveB:)
 
Many Thanks!

WOW,

Thanks to all who have worked on & updated this great old warbird for our flying pleasure! Also, to all the crew members that flew & maintained these birds of freedom during WWII!

papaecho
 
One other issue that wasn't fixed with the patch (at east it still showed up on mine) is the fuel selectors in the acft.cfg.

If you notice a fuel imbalance during cruise or the fuel selectors on the FE panel not working correctly, check the acft.cfg fuel section and make sure that the tank selectors are set for 4 and not 2. It should look like:

number_of_tank_selectors=4

--Dan
 
Hi! My download from FSPilot Shop only has the installer available: FCD-150.zip
My aircraft cfg reads VERSION 0.8.2611082255 too.

Is there a "visible feature" that i can look at the model that was implemented with the patch? That way i can verify if the patch is installed already with the original installer.
Thanks!
 
A few aircraft edits from me:

I found it impossible to take off with the Grand slam and even 60% fuel and started to look into the cfg values.
First of all the weight reduction of removing the two turrets and other internal equipment is not reflected in the empty weight values.
ONLY FOR B.1 SPECIAL

[weight_and_balance]
max_gross_weight = 68000
empty_weight = 28000 (Standard B.1: 32000) 1400lb dorsal turret, 1100 nose turret, 1500lb other equipment.

Also a bit more power to match the Merlin 24 in the B.1 (S)

ONLY FOR B.1 SPECIAL!

[piston_engine]
cylinder_displacement=137.4
compression_ratio=6.5
number_of_cylinders=12
max_rated_rpm=3000
max_rated_hp=1610



I found the roll a bit sluggish so I have done a slight edit:

[airplane_geometry]
vtail_area = 45.0 //Square feet

[flight_tuning]
aileron_effectiveness = 1.5
 
You must log in or register to reply here.
Back
Top