FM-2 Wildcat

Kelti,
I think I know the problem. Let me find my notes on the US_Pilot and I'll get you a fix. Thanks for the props, etc., I'll include them in the upload package.
Bub
 
Pilot Fix

Kelti,

Here's the fix. Start with fresh copies as it will be easier.

Pilot FM-2
Find us_pilot_1.bmp and us_pilot_2.bmp in the CFS2\Texture folder. Take a copy of
both files & paste them into the Texture folder of the Wildcat. Then open the copies
in DXTBmp & change the Alpha Channel to black. (Alpha > Invert Alpha) 'Save As' in
Extended 555-1 format. (CFS2 reads textures in the aircraft Texture folder before
the main Texture directory.)
First add this extra mount under
[HARDPOINTS]
mount.19=-0.03,0.23,-1.01
This is the first payload entry. (He will need adding to each Payload.) Note this is
for Mauro's US Pilot.
[PAYLOAD.0]
; Payload = Guns Only
mount.19=US_pilot, 1, 0
Also, make sure you have unaltered copies in Mauro's US Pilot texture folder.
Don't forget to delete the CDP file before trying it in CFS2. Good Luck!

If you still have problems, let me know.
Bub
 
gaucho_59 said:
Easy enough to do... my commission or omission...
will rectify...
Click to expand...

SPLENDIDO! :applause: :applause: :applause:



bub said:
Pilot Fix
Kelti,

Here's the fix. Start with fresh copies as it will be easier.

Pilot FM-2
Find us_pilot_1.bmp and us_pilot_2.bmp in the CFS2\Texture folder. Take a copy of
both files & paste them into the Texture folder of the Wildcat. Then open the copies
in DXTBmp & change the Alpha Channel to black. (Alpha > Invert Alpha) 'Save As' in
Extended 555-1 format. (CFS2 reads textures in the aircraft Texture folder before
the main Texture directory.)
First add this extra mount under
[HARDPOINTS]
mount.19=-0.03,0.23,-1.01
This is the first payload entry. (He will need adding to each Payload.)
Click to expand...

Gotcha! I did not know stock CFS2 pilot texture had alpha channel textures, I never felt the need to open them. It explains the "ghost pilot" problem perfectly.
But.....how come it shows up even if I did not install US_Pilot in my root \AIRCRAFTS folder? And no error message for a missing payload either. This is a mistery.

This also brings up a suggestion: since I always run my \AIRCRAFTS folder filled to the brim, I personally hate to have to waste a precious airplane folder to accomodate a simple pilot. From previous threads, I know other simmers around here share the same feelings.
I much rather use pilot figures that can be loaded as any other payload, like Martin Wright's RAF pilor, or Wolfi's US pilot or William Dicken's Allied pilot.

In my last upload pack for Mauro Giacomazzi's aircraft production, I replaced all of Mauro's pilots with the above. I strongly suggest to do the same with Gramps' FM-2.

You're welcome to the blurred prop textures and the exh effect, (just a tad overdue....:icon_lol:) do as you please with them.

Since you wrote above that Lindsay's website is gone, do you think it would be kosher re-uploading here my stock OH B-24 repaint based on Lindsay's B-24 desert livery?

Cheers!
KH :ernae:
 
Kelti,
It was explained to me that the game reads the textures in the Wildcat folder first, which makes the existing pilot invisable. Then it reads the ones in Mauro's pilot, which makes it visable. After that it would go to the Main Texture folder.

Thanks again for the props etc., they are perfect for the FM-2.

As far as reloading the Textures from Lindseys site, If they're yours, no problem. I would make sure I gave credit to all who were involved. That should cover the bases, in my opinion.

Again, thank you. I'l try to get the FM-2 packaged up and uploaded as soon as possible.
Bub
 
FM-2 Wildcat "Mah Baby" Uploaded

Hi All,
Just uploaded "Mah Baby". Make sure you read the ReadMe. This aircraft contains lots of good "stuff" from lots of good people.
Have fun,
Bub
 
RM_FM-2_Wildcat.zip

389913822370345014.jpg

A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - American

Description: Hi All,

Here's my rendition of Gramps FM-2 Wildcat. It's in the colors of "Mah Baby" flown by Lt. J.D. McGraw of VC-10 off the USS Gambier Bay, CVE-73. He ended the war with five confirmed air to air victories. It's a complete aircraft. Panel, sounds, etc.

Please read the ReadMe, It has all the information needed to make this work.

As usual, all legalities apply.

Thanks and Have Fun,

Bub

To check it out, rate it or add comments, visit RM_FM-2_Wildcat.zip
The comments you make there will appear in the posts below.
 
Hey Bub!

bub said:
389913822370345014.jpg

A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - American

Description: Hi All,

Here's my rendition of Gramps FM-2 Wildcat. It's in the colors of "Mah Baby" flown by Lt. J.D. McGraw of VC-10 off the USS Gambier Bay, CVE-73. He ended the war with five confirmed air to air victories. It's a complete aircraft. Panel, sounds, etc.

Please read the ReadMe, It has all the information needed to make this work.

As usual, all legalities apply.

Thanks and Have Fun,

Bub

To check it out, rate it or add comments, visit RM_FM-2_Wildcat.zip
The comments you make there will appear in the posts below.
Click to expand...

That Jap pilot is still there! What you got against white folks? :jump::jump:
Seriously... a very useful addition to the Wildcats... :applause::applause::applause:
I'm going to "accurize" the textures and make a template... if you want to produce more...
I'll send it to you when I am done... Just add liveries...
 
Reply...

Bub,

Thanks for your outstanding work, I love the tubby wonder!
 
Reply to Warbirds Forum

Darren,
Thanks, I appreciate it. Glad you like it.

Gaucho,
Its your pilot. I guess it just comes out that way. If you have something better, e-mail it to me. We'll try it out. Nothing ventured, nothing gained.
Bub
 
Here is the Wildcat with "retouched" textures

bub said:
Darren,
Thanks, I appreciate it. Glad you like it.

Gaucho,
Its your pilot. I guess it just comes out that way. If you have something better, e-mail it to me. We'll try it out. Nothing ventured, nothing gained.
Bub
Click to expand...

Available as usual....
 
Gaucho,

In the download you should have an Extra's folder. Inside there's a Weapons folder. Inside that there are two, a Objects_dp and a Scenedb, place the files inside into their respective Main CFS2 folders and they should work.

When can we expect that woderful looking panel of your's? It would offset this FM-2 nicely.

Any More problems, let me know and I'll try to help you out.

Bub
 
Thanks... much appreciated

bub said:
Gaucho,

In the download you should have an Extra's folder. Inside there's a Weapons folder. Inside that there are two, a Objects_dp and a Scenedb, place the files inside into their respective Main CFS2 folders and they should work.

When can we expect that woderful looking panel of your's? It would offset this FM-2 nicely.

Any More problems, let me know and I'll try to help you out.

Bub
Click to expand...

So far I have only developed the artwork bmp... need to work on a decent config. file
 
FM-2 Wildcat Black 9

Hi All,
I've been a little busy these past few days and am falling behind. I'll have the Atlantic Wildcat uploaded in a couple of days. The Depth Charges in the dp file are from Baldy and can be found here at SOH. Somehow I forgot to include that tidbit in the ReadMe.
Thanks,
Bub
 
YEAH!

bub said:
Hi All,
I've been a little busy these past few days and am falling behind. I'll have the Atlantic Wildcat uploaded in a couple of days. The Depth Charges in the dp file are from Baldy and can be found here at SOH. Somehow I forgot to include that tidbit in the ReadMe.
Thanks,
Bub
Click to expand...

Awesome, Bub! :applause: :applause: :applause: :applause:

Thank you!
KH :ernae:
 
Kelti,
My pleasure. I was told to ask you, Are all of your structures on your property, Catastrato? And, How do you like the E.M.U.?
Bub
 
You must log in or register to reply here.
Back
Top