• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

Free SSW F-104G now on Simmarket; 1 day only!!

I keep getting stuck at customer login.

I thought it might be my password (it didn't say it was wrong - it just sat there). So I did a reset, which was an instant email - so part of their fulfilment system works.

But I can't "check out"properly. It their ecommerce system oversubscribed?

Any help would be appreciated - this is a real treat I'd love to have.

thx,

dl
 
OK - tried on my work laptop - came through.

But the orders and the installers don't mention P3D4.5, only FSX, even that's what I picked.

?

I predict this will be a long and frustrating process to enjoy this product ... :biggrin-new:

EDIT - the downloads came through staggered.

I now have the P3D version. 'Hope this isn't too painful .... :)
 
Thanks, OBoy.

Before I install, when I extracted the two installers, I noted 3 folders in the main installation:

$_OUTDIR
$PLUGINSDIR
SimSkunkWorks

And then in the keyless installation, these 3 folders:

_•€
_š€
_Ÿ€

So where does this product and these folders go? By that I mean, in the old days in FSX, I'd dump everything in my main root FSX folder and carry on. Now, though, I put all my addons in C:\Users\****\Documents\Prepar3D v4 Add-ons

Where all those addon files are cross referenced to the main install using the xmls.

So I suspect that dropping everything in that folder won't work, I assume, since the above 6 folders wouldn't be visible by the sim, right? Or do I drop these 6 "SSW-specific folders" into my root P3D install and install the other contents (Simobject, sound, effect, etc.) in my addon folder set?

OS is W7. Yes, flame away - it works fine but be sorting it out soon ... :)

dl
 
Installation went fine, but I got always "System not initialized, initialize manually". Sexy voice, but annoying on a permanent basis :mixed-smiley-027: ...
Is this aircraft or installation concerning?
 
Thanks very much SSW. I already had this bird for P3DV3, and love it, so it is a great pleasure to get the P3DV4 version too. I was just flying the P3DV3 version the other night in VR and it is a lot of fun, and a greatly detailed simulation.
 
OK - got it installed more or less - the installer and keyless installer files didn't come through as .exes, so when I added that extension, they were proper installers and worked correctly.

The order I followed was installer, textures, then keyless installer. My C++ redistributables are up to 2019.

I added everything into my off-core install addon folder, but got an error for sound.ini. I copied that folder over to the root, where the program was looking for it, and that got that sorted. But I still get a WebSimconnect error. Not sure why, as their is indeed both a WebSimconnect folder and a WebSimBrowser folder in the SimSkunkWorks folder of my main addon P3D folder. Any ideas what's the issue?

Finally, (and perhaps connected to that error) - I can't operate the loadout manager very well. I can load bombs, and the Vinten Pod, but not Tip tanks. Or any tanks, for that matter.

Any help on that would be great. I'll worry about how to close the canopy later - I recall a youtube video on startup.

thanks,

dl
 
IIRC, you need to do something unusual to fill the tip tanks... like enabling them in the cockpit. If i get a chance, I'll try it myself. The canopy closure is a bit tricky... certainly easier if you have a headtracker so you can look around.

EDIT: Turn 'External Refuel' on in the cockpit (left console), then you can fill the tip tanks.

Totally confused as to why your installers were butchered. Glad you got it sorted though.
 
Last edited:
odourboy said:
IIRC, you need to do something unusual to fill the tip tanks... like enabling them in the cockpit. If i get a chance, I'll try it myself. The canopy closure is a bit tricky... certainly easier if you have a headtracker so you can look around.

Totally confused as to why your installers were butchered. Glad you got it sorted though.
Click to expand...

Thanks OB.

I may have to reread the manual. I had this bird in FSX but it was a long time ago.

Re the installers, yes, weird. I even redownloaded them and they came through as a (1) file with no extension. That’s why initially I extracted them, which 7-zip was able to do. Once it clicked on my mind that the the link on the Simmarket page referenced a .exe file, then it was all clear. I’ve never had to add the file extension manually like that before.
 
OK, I got the engine started, the cockpit closed and the thing into the air...but how do I get the tiptanks, or any other tank for that matter, to show? Rockets no problem, but no tanks. Any suggestions? And where is the manual?

jk6491

jk6496
 
Manschy said:
Installation went fine, but I got always "System not initialized, initialize manually". Sexy voice, but annoying on a permanent basis :mixed-smiley-027: ...
Is this aircraft or installation concerning?
Click to expand...

I have exactly the same problem. I just can't get the engines to work, they fire up then the rev's drop off, even with the throttle put into the idle position :banghead:
 
IanHenry said:
I have exactly the same problem. I just can't get the engines to work, they fire up then the rev's drop off, even with the throttle put into the idle position :banghead:
Click to expand...

What are you guys using for your P3D default aircraft? I had that problem way back and I think that was the issue. I use the F-22 (still).
 
For the issue with tanks not showing up at all or the "system not initialized" message, try uninstalling the aircraft and running the installer again, making sure you run the installer as administrator and with your AV software disabled. For whatever reason, SSW installers seem to be super finicky about those two things.

To start the engine, here's the procedure I use (assuming you just loaded the airplane into P3d).

First, turn on the external power by clicking the guarded "EPU" switch on the left console. You'll get a 2d popup and hear the generator fire up.

Once that's running, left click one of the two start switches on the left forward console (by the gear handle), and you should see the RPM start to rise. When the RPM hits about 20% or so, it'll stop rising, and at that point bring the throttle out of idle cutoff (just move your throttle forward a bit) and right click on whichever starter switch you previously used to shut the starter off.
 
jankees said:
OK, I got the engine started, the cockpit closed and the thing into the air...but how do I get the tiptanks, or any other tank for that matter, to show? Rockets no problem, but no tanks. Any suggestions? And where is the manual?

jk6491
Click to expand...

How do you get the cockpit closed? Thanks
 
If you look at the bottom right side of the canopy when it's open (so basically straight overhead and a bit to the left), you'll see a yellow lever on the base of the canopy. That lever is the lock release, so click it once, then move the mouse somewhere else on the canopy and hold down the left mouse button. You should see the hand icon close, and the canopy will start coming down.

Once it's down all the way, use the lever on the right cockpit sidewall just under the canopy to seal it down all the way.
 
jankees said:
OK, I got the engine started, the cockpit closed and the thing into the air...but how do I get the tiptanks, or any other tank for that matter, to show? Rockets no problem, but no tanks. Any suggestions? And where is the manual?
Click to expand...

I think the tanks only work on certain models. If you look at the three Dutch paints included only one has the tip tanks in the preview screen.
 
You must log in or register to reply here.
Back
Top