• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

FSD/Milviz YF-23 OUT NOW!

The first path I put up last night to correct the P38/YF 23 compatibility issues was obviously done in too much of a rush and caused some problems. I have corrected those issues and re-uploaded. I have had some PMs telling me everything is working well know If you did not download it I recommend you do so:

http://69.13.144.131/product/files/FSDevelopersYF23sr.exe

If anyone still has any issues about this, or any other YF 23 issue please let me know here.

We should have our new forum software up any day now, and when it is ready, we invite everyone to participate.
 
Maybe some one can help me with this small problem. I tried the YF-23 demo, 2 day thing. But I never get a email for the link. I have tried 2 times and waited for days between each. Any ideas ?

Thanks
 
Tim_FSD said:
The first path I put up last night to correct the P38/YF 23 compatibility issues was obviously done in too much of a rush and caused some problems. I have corrected those issues and re-uploaded. I have had some PMs telling me everything is working well know If you did not download it I recommend you do so:

http://69.13.144.131/product/files/FSDevelopersYF23sr.exe

If anyone still has any issues about this, or any other YF 23 issue please let me know here.

We should have our new forum software up any day now, and when it is ready, we invite everyone to participate.
Click to expand...

Latest patch works Great!
All better now!!!

That YF23-WOW....
 
XLR8 said:
Maybe some one can help me with this small problem. I tried the YF-23 demo, 2 day thing. But I never get a email for the link. I have tried 2 times and waited for days between each. Any ideas ?

Thanks
Click to expand...

You might want to check your spam filter. A lot of filters and mail servers will put any automated email there.

That notwithstanding, if you want to download the YF23 demo you can do so here:

http://69.13.144.131/product/files/FSDevelopersYF23demo.exe

If you want to purchase it you can order it from the YF23 web page:

http://www.fsd-international.com/Hangar/YF23/Index.htm

Let us know if you have any questions.
 
Well I go to load the YF23 and she acts like she is going to load she just never does and it locks me form trying to even shut down fx so I have to shut down thru task manager which states not responding

I reload FX and the P-38 locks down and in task manage just state not responding

and honestly I didn't even want to try the commander but I did and I seems to be working, FPS ok again

Sorry I hate being the last guy with who needs this looked at but its not right on this new computer

I can't even tell ya what the puter doing cause it locks up so it never give me a window with fatal error any more. :kilroy: at least with it, it will list issues files
 
doublecool said:
Well I go to load the YF23 and she acts like she is going to load she just never does and it locks me form trying to even shut down fx so I have to shut down thru task manager which states not responding

I reload FX and the P-38 locks down and in task manage just state not responding

and honestly I didn't even want to try the commander but I did and I seems to be working, FPS ok again

Sorry I hate being the last guy with who needs this looked at but its not right on this new computer

I can't even tell ya what the puter doing cause it locks up so it never give me a window with fatal error any more. :kilroy: at least with it, it will list issues files
Click to expand...

First of all, did you install the patch that corrects YF23 loading problems after you have installed the P38?

http://69.13.144.131/product/files/FSDevelopersYF23sr.exe

While you are at it, you might as well download the new Service Release we just posted for the P38 as well:

http://www.fsd-international.com/Hangar/P38/sr.htm

If you still have problems send up a flare and we will help you out.
 
Tim, you may have already done this but what I would suggest is to put all of these small patches and service packs into the main installer, make a new thread so people see and tell eveyone to reinstall with the new installer. It seems like you have many things floating around and it is very confusing. Please build it all into a new installer and post them.
 
.
Well guys, decided to download & install this latest patch & take another chance here. P-38 seems fine, all gauges there (but no recognition
lights coming on. Only tried the "Factory Fresh" model) & the YF-23 seems intact gauge-wise (though both marker lights are green??)​

YF-23RecognitionLights.jpg

As expressed before, my loading attempts for the Commander are continuing to cause fatal errors after correctly installing this
latest service release, APPCRASH due to faulty FSDX.dll. This plane was flying perfectly before the initial P-38 full install.​


Am not wanting to beta test this stuff. Have relayed enough good info for now. My P-38 factory-fresh seems to operate okay.
.​
 
Mr. Tim "Tim_FSD,"

I still haven't been able to install the DEMO version because of ERROR Code 1076. I've sent at least 3 email to the support and haven't heard anything yet from the last responce.

HERE is an example of the issue... (See Pic. Attached)
Thank you.
 
Tim_FSD said:
The first path I put up last night to correct the P38/YF 23 compatibility issues was obviously done in too much of a rush and caused some problems. I have corrected those issues and re-uploaded. I have had some PMs telling me everything is working well know If you did not download it I recommend you do so:

http://69.13.144.131/product/files/FSDevelopersYF23sr.exe

If anyone still has any issues about this, or any other YF 23 issue please let me know here.

We should have our new forum software up any day now, and when it is ready, we invite everyone to participate.
Click to expand...

Error 21 when I try the patch....this is getting frustrating...
 
Tim_FSD said:
First of all, did you install the patch that corrects YF23 loading problems after you have installed the P38?

http://69.13.144.131/product/files/FSDevelopersYF23sr.exe

While you are at it, you might as well download the new Service Release we just posted for the P38 as well:

http://www.fsd-international.com/Hangar/P38/sr.htm

If you still have problems send up a flare and we will help you out.
Click to expand...


Tim thank you for the reply, and I hope thing are well with your family!

Just some background info
I Purchased all three the Commander, YF-23, and P-38
Both Commander and YF-23 work perfectly before loading P-38 then the problems began...

I've added patches as they came out never uninstalling anything just added patches...

as I stated the Commander seemed to be working alright with latest patch to the YF-23 but both the YF-23 and P-38 locks up when you try and load them.

Now I've add the latest patch you just posted for the P-38 and still both the YF-23 and p-38 lock up trying to load the aircraft. The Commander is working but frame rates are not what they were. Inside or outside the aircraft frame rates were very good and pretty much the same.

I'm done for the evening...testing patches, and three aircraft at a time, with them locking up the old sim, is not really what I want to do to night...

I love FSD, but gentlemen this idea of combining aircraft intel together is not one I'm willing to take on again...I hope FSD reconsiders this in the future.

However if this is the plan and direction for FSD I hope you will inform your customers of this potential issue.

At this point I think I need to uninstall all three products and hope the commander and YF-23 work again like they once did and FSD gets the P-38 running like they planned

Remember working with developers on issues on a single plane is OK and can be fun. It only effects one plane... not the other ones they have purchased and have set up the way they want them. Plus most customers love to help...

I Thank you

Stu
 
After reading the other threads regarding the P-38 and people's frustration, and this thread where the P38 has made the Commander , YF-23 and P-38 unusable... I for one do not want this thread to go cold...I have three products and none work if all are loaded

Some folks here are just sitting and waiting giving you guys time for the real fix and are just wore out by this patch after patch. This is a small reminder to FSD of unanswered questions and issues that still exist, and not just getting your P-38 working. There 3 aircraft involved here

Thank you
 
I have all the instruments in every plane now, but I get a "License could not be validated" message at the top of the screen if I hit Shift-1 to bring up the helmet-mounted HUD.
 
I agree that the interference with the driver should not have happened, and should have been caught in the beta process. We are taking steps to correct that.

FS X crashing, however, is unusual. When FS X crashes it should produce an error message with a link to more information. I need to know what the error says and then I should be able to get to the bottom if the problem.
 
Tim, yes and yes. The latest patch is installed. The hud actually works, just has that message at the top of the screen. And I didn't see that before the patch.
 
Tim,

OK before total removal of all three plane I started from scratch

Down loaded updated P-38 and your latest YF-23 file shown on this thread using Windows internet Explorer...

Ran Yf 23 file first
Then P-38

Shut down Computer then Booted up again, here the short of it

Commander seems to be working OK

YF all gauges there but in window of just HUD states at the top "License could not be validated"

P-38 tested only L model and red Bull Model

L model All gauges there lighting alittle odd inside light switch turns on wing tip light (Nav)

Red Bull Model All gauges Lighting ? and also GPS stops working...

have not tested everthing in these 3 aircraft, but I will

I can at least fly them to check them out,

the only thing I did different from befor was download using Windows Internet Explorer

Thank you and FSD for your commitment.
 
Tim, I have redownloaded the P-38 because it was to my understanding that all the little patches and stuff were put into the newest installer. Is it the same case with the YF-23 and if so, where can I redownload the installer?
 
You must log in or register to reply here.
Back
Top