• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

FSSC 1.2.5

B

bobhegf

Charter Member
I downloaded FSSC 1.2.5 and then found out that I can`t create any flat areas. I can use everything else but the flat area part of the program. What gives with FSSC and WIN7? I have got to be able to create flat areas inorder to do any scenery. When I used it in win98se it worked greate but I couldn`t get my bunner to work inorder to burn CDs with the scenery on it.I got all the other programs to build scenery to work fine.With the old FSSC I had on a cd I was able to install it on this pc. I couldn`t get FSSC to transport the scenery to CFS2 and now with the new download I can`t create flat areas. HELP
 
bobhegf,

I don't know about FSSC 1.2.5 working with WIn7. I am using FSSC 1.5.11 and it seems to work okay.

It is available from Flightsim as fssc15b.zip and an update, fsscu15b.zip.

I am running the program on a drive that I added to my computer instead of the "C" drive.

Hope that this is of some help to you.

voyager
 
fellows I have done everything I can think of to get FSSC any version to work in win7 but it is a no go.I eather don`t have a workable flar are program in FSSC or it will not transfer the completed scenery to CFS2. I have tried to download several different upgraded versions and the links are broken or I have to sign up for all kinds of programs. This is starting to be a real pain in the backside and my temper is starting to get real short. Is anyone using FSSC with win7 and if so can you help me get it to work. i got the DXTBmp and paint program to work but without FSSC doing scenery and being able to transport it to CFS2 is outside my paygrade. Will win7 even support FSSC and CFS2?
 
Hi Bob.

I'll try to lend a hand. Lets start with the basics- just so I will know where to focus.

First of all:
  1. Open FSSC
  2. Click on the "Options" menu
  3. Click on "Preferences"
  4. Click the "Locations" tab
  5. Left click "Export Folder" to hi-lite it
  6. Click the "Browse" button
  7. In the "Selected Folder" window right click on the hi-lited folder address and copy it
  8. Paste it into a reply to this post.

Thanks
MR
 
BTW Bob,

Just to ensure we are both on the same FSSC page, please have a look at the screenshot below.

Is this pretty much what your FSSC work space looks like- aside from the bg color and grid? This is the workspace for FSSC Version 1.2.15. This is the version I have on my rig- along with version 1.5

I don't think there is much difference between 1.2.15 and 1.2.5.

Cheers,
MR
 
MR, mine doesn`t look anything like that at all. Ido have a grid but it is only a 10 by 10 grid. I am putting up a screne shot. On my win98se pc mine looked like the one you have. I don`t think they have an FSSC program that works with win7 that I can find, If so I sure wish I could find it.
 
bobhegf said:
MR, mine doesn`t look anything like that at all. Ido have a grid but it is only a 10 by 10 grid. I am putting up a screne shot.
Click to expand...

Actually Bob- except for the background color and the grid, the two things I mentioned- it looks exactly the same, buddy. The menu across the top is all I am interested in anyway. Do you see the "Options" menu? Click on it and please follow the steps that I posted 2 posts ago. Forget that the flat area is greyed out for the time being and lets start at the beginning.

Thanks,
MR

PS WRT the flattens (I know I said to forget about them for the moment) try opening an older scn file- one that you made pre-windows7- one that includes a flatten and see if it shows.
 
MR you tought me how to do blended scenery and and now how to I hope get this thing to work, I sure do thank you for your help. Now I will get to work and see if i can get this going.
 
One reason that your new scenery isn't being off loaded to CFS2 is because you haven't told FSSC to put it there.

Here is what I want you to do:

FIRST: Check that your FS Folder is correctly specified in FSSC locations preferences:
Click on the "options" menu in FSSC
Click on "Preferences"
Click the "Locations" tab
Right click "FS folder" to hi-lite it
Click the "Browse" button
Starting at "C:\" in the "Folders" window, browse down to the Microsoft Games\Combat Flight Simulator 2 folder
Double click the Combat Flight Simulator 2 folder to hi-lite and change its closed folder icon to an open folder icon
Click "OK"

SECOND: Check that your Scenery Compiler location is correctly specified in FSSC locations preferences:
Click on the "options" menu in FSSC
Click on "Preferences"
Click the "Locations" tab
Right click "Scenery Compiler" to hi-lite it
Click the "Browse" button
Starting at "C:\" in the "Folders" window, browse down to the Program Files\Leung Software\FS Scenery Creator\Scasm folder
Double click the FS Scenery Creator\Scasm folder
Click the "scasm.exe" to hi-lite it.
Click "Open"
Click "OK"


THIRD: Create a scenery folder in CFS2 that is exclusive for exporting newly compiled scenery bgls to.

In your main CFS2 parent folder create a folder and name it "My Terrain"
Inside the My Terrain folder create two additional folders. Name one "scenery" and the other "texture"

The path/location of this folder should be:

C:\Program Files\Microsoft Games\Combat Flight Simulator 2\My Terrain\scenery

After you have created this folder group:

Click on the "options" menu in FSSC
Click on "Preferences"
Click the "Locations" tab
Right click "Export folder" to hi-lite it
Click the "Browse" button
Starting at "C:\" in the "Folders" window, browse down to the Combat Flight Simulator 2\My Terrain\scenery folder
Double click the My Terrain/scenery folder to hi-lite and change its closed folder icon to an open folder icon
Click "OK"

After this try exporting a scenery bgl and check to make sure it is in the My Terrain/scenery folder.

Then open CFS2. Activate the My Terrain folder and see it the scenery shows up.

All for now,
MR
 
I got to the scasm folder and found this. See below.I have stoped there for the present time untill you can get back to me. Thank you for the help.
 
Ok, Thanks, Bob.

I see what happened. See the down arrow next to "open"? Click the arrow and see what other choices are available besides "open". If "select" is there, choose it. If not, try right clicking "scasm.exe" and see if "select" is at the top of the context menu that pops up. If so choose it. Let me know how she goes.

MR

PS also, Bob if I were you, I would go into windows explorer "tools/folder options/view/advanced settings/files and folders" and un-check the box that says "hide extensions for known file types"- this will allow you to see the entire file names.

Also, while you are at it, also in windows explorer, go to "tools/folder options/view/advanced settings/files and folders/hidden files and folders" and put a click on the "show hidden files and folders" button.

The first is a definite to do. The second- up to you.

MR
 
I was able to get to the scasm file and this is what happened.I went to open and it scent me back to the preference folder. see below.
 
I think you are ok. I think it got it. To make sure, go back to the locations list. Hi-lite "Scenery compiler" and see if scasm.exe is the name that shows in the "File name" window. If so then you are good to go with that step.

MR
 
Don't forget to change the locations specified for your "FS Folder", "Export Folder" and also your "Texture Folder"

To set your Texture Folder location:
Click on the "options" menu in FSSC
Click on "Preferences"
Click the "Locations" tab
Right click "Texture folder" to hi-lite it
Click the "Browse" button
Starting at "C:\" in the "Folders" window, browse down to the Program Files\Microsoft Games\Combat Flight Simulator 2\TEXTURE folder
Double click the Combat Flight Simulator 2\TEXTURE folder to hi-lite and change its closed folder icon to an open folder icon
Click "OK"
 
I did it and all looked good. I created the scenery folder you suggested but when I checked it came out to be.I was able to open the new folder per your instructions and that part worked ok.Now this may take awhile . I am going to do some scenery and see what happens
 
Bob, you need to be a little more clear about what you were doing when this screen came up. Were you setting your Export Folder location?

This is the screen that came up when you double clicked the my terrain/scenery folder? Or when you clicked the My Terrain folder?

If the "read only" box being checked is what is bothering you, just un-check it.

MR
 
You must log in or register to reply here.
Back
Top