kilo delta
Charter Member 2015
There's your problem!.........dump Ntune as it's extremely buggy. Overclock through the bios instead.
There's your problem!.........dump Ntune as it's extremely buggy. Overclock through the bios instead.
S
skipastra
Guest
Ok, thought I'd update on what has happened since last post. I ran the ATI HD4870X2 with the fan set at 100% and noticed an immediate improvement in stability but still the occasional hard freeze including at 1st boot into windows.
After contacting Sapphire (card manufacturer) and being advised by them that the card is not fully supported on the n790i board (XFX dispute this) I decided to try an XFX GTX285 Black Edition.
Wow, no CTD's, freezing and better performance - steady 30 fps even with bloom. Will keep testing but I suspect the ATI card will be appearing on an auction site in the not too distant future!
Thanks for all your help and suggestions, it was warmly appreciated.
James
After contacting Sapphire (card manufacturer) and being advised by them that the card is not fully supported on the n790i board (XFX dispute this) I decided to try an XFX GTX285 Black Edition.
Wow, no CTD's, freezing and better performance - steady 30 fps even with bloom. Will keep testing but I suspect the ATI card will be appearing on an auction site in the not too distant future!
Thanks for all your help and suggestions, it was warmly appreciated.
James
H
harleyman
Guest
Thanks for the update.. I knew the 790i boards were having problems but thats a new one to add to the drama..not supported on that board for the 4870X2
Don't forget to keep the fan up on that card still..At least 50% and test temps under load to see..Then you know to go up or down as needed...
Use EVGA Percission for that card ,Your new Nvidia one that is...
Glad you are fixed...
Don't forget to keep the fan up on that card still..At least 50% and test temps under load to see..Then you know to go up or down as needed...
Use EVGA Percission for that card ,Your new Nvidia one that is...
Glad you are fixed...