-
Please see the most recent updates in the "Where did the .com name go?" thread. Posts number 16 and 17.
-
Special Server Maintenance
Just when you think you have everything running some what better...
You get a message from the Hosting company. Short story they need to move us to a new server. I have been working with them to plan a good date for all concerned. Here is what we have come up with as a schedule.
- November 4th 17:00 -5UTC shut off the forums and start backup proceedures. During this time there will be no access to the forums or the Resource Section.
- November 5th Continue with Backups and download same until complete.
- November 6th 7:00 turn over server to hosting company to move system to new server
- November 7th - 8th restore backups and upgrade forum software.
If all goes well we should be back online on November 8th.
To keep you updated we will post updates on AVSIM forums.
Thank you for your support.
Function Shift+E+3.......
- Thread starter alain0568
- Start date
tgycgijoes
Members +
Not Quite Sure
What aircraft are you trying to assign a switch in? What is "MAJ", SHIFT? If so, then you will have to have the proper paid version of FSUIPC for your simulator. Then you can assign any button or key to any function you choose. Some of the buttons of the yoke CAN be assigned through the OPTIONS-KEYS in your simulator but not all of them. You can also use the Door Gauge which is available in AVSIM, Simviation etc. It is coded for all four E (Exit) codes and works much better than trying to use the key combos from the keyboard. it is in xml code so works with all sims except maybe MSFS or X-plane. I hope that this helps.
What aircraft are you trying to assign a switch in? What is "MAJ", SHIFT? If so, then you will have to have the proper paid version of FSUIPC for your simulator. Then you can assign any button or key to any function you choose. Some of the buttons of the yoke CAN be assigned through the OPTIONS-KEYS in your simulator but not all of them. You can also use the Door Gauge which is available in AVSIM, Simviation etc. It is coded for all four E (Exit) codes and works much better than trying to use the key combos from the keyboard. it is in xml code so works with all sims except maybe MSFS or X-plane. I hope that this helps.
Hello tgycgijoes,
-thank for your response!
Yes Maj is Shift!!(sorry)
In fact I would like to order by a switch, the bomb/torpedo hold of the G7_S2F1X of Eagle Rotorcraft Simulations/Soh, as well as the descent of the Radome, respectively controlled by Shift+E+3 and Shift+E+4!
For the door gauge, on Avsim I only find CX Gargo Door and seems to act only on a door! No discovery on Simviation!
Do you have the exact name of this Gauge?
Thanks a lot for your help!
Alain
-
NB:Ok,i found it!
[FONT=verdana, sans-serif]DoorControl Gauge , [/FONT][FONT=verdana, sans-serif][FONT=verdana, sans-serif]Georg Aubele.
It works fine!
Thank you!
[/FONT][/FONT]
Alain
-
-thank for your response!
Yes Maj is Shift!!(sorry)
In fact I would like to order by a switch, the bomb/torpedo hold of the G7_S2F1X of Eagle Rotorcraft Simulations/Soh, as well as the descent of the Radome, respectively controlled by Shift+E+3 and Shift+E+4!
For the door gauge, on Avsim I only find CX Gargo Door and seems to act only on a door! No discovery on Simviation!
Do you have the exact name of this Gauge?
Thanks a lot for your help!
Alain
-
NB:Ok,i found it!
[FONT=verdana, sans-serif]DoorControl Gauge , [/FONT][FONT=verdana, sans-serif][FONT=verdana, sans-serif]Georg Aubele.
It works fine!
Thank you!
[/FONT][/FONT]
Alain
-
Last edited:
tgycgijoes
Members +
Glad To Hear It
Glad that you found it or I was going to look for you in my files. I use it a lot because my keyboard does not like SHIFT+E+4. It defaults to Top Down View. I make a popup of it.Hello tgycgijoes,
-thank for your response!
Yes Maj is Shift!!(sorry)
In fact I would like to order by a switch, the bomb/torpedo hold of the G7_S2F1X of Eagle Rotorcraft Simulations/Soh, as well as the descent of the Radome, respectively controlled by Shift+E+3 and Shift+E+4!
For the door gauge, on Avsim I only find CX Gargo Door and seems to act only on a door! No discovery on Simviation!
Do you have the exact name of this Gauge?
Thanks a lot for your help!
Alain
-
NB:Ok,i found it!
DoorControl Gauge , Georg Aubele.
It works fine!
Thank you!
Alain
-
tgycgijoes
Members +
I Forgot We Did This
If you really want to see something cool...check out this thread here:
http://www.sim-outhouse.com/sohforums/local_links.php?catid=117&linkid=23677
If you really want to see something cool...check out this thread here:
http://www.sim-outhouse.com/sohforums/local_links.php?catid=117&linkid=23677
Good morning tgycgijoes,
Thank you for this idea!
It's a great improvement that I tried, but I don't have the tacpack!
So I'm going to stay with the Gauge control for the moment!
I would have liked to have these orders by a switch, but I will do with it!
Thank you and good day!
Alain
Thank you for this idea!
It's a great improvement that I tried, but I don't have the tacpack!
So I'm going to stay with the Gauge control for the moment!
I would have liked to have these orders by a switch, but I will do with it!
Thank you and good day!
Alain
tgycgijoes
Members +
Help Here
Whoever volunteers to do this for you, needs to know what the light looks like such as a jpg of the real one to create it and I think it can be done. Lights and switches are simple xml code. They use 2 bmp's one ON and the other OFF. Get that together and post it in your thread here. I may even be able to do it for you but I am not an expert xml writer by any stretch of the imagination. There are guys that are and always willing to help. I get all my help at FS Developers.
Whoever volunteers to do this for you, needs to know what the light looks like such as a jpg of the real one to create it and I think it can be done. Lights and switches are simple xml code. They use 2 bmp's one ON and the other OFF. Get that together and post it in your thread here. I may even be able to do it for you but I am not an expert xml writer by any stretch of the imagination. There are guys that are and always willing to help. I get all my help at FS Developers.
Good morning,
To specify my request -I wish a switch, for example in the Gauges of FSX folder, "CPT.Toggles.808.cab",-Switch Battery, which commands the Shift + E + 3 function, and which lights a warmer, for example in the gauge "[St_Tracker]"-Warn Amb! And so the corresponding.xml file!
The switch's BMPs are in the basic, so free FSX Gauges?
However to use the Warn Amber light, I will have to request authorization from Soh, Milton, and?
The use of another lights free of rights is of course possible.
Thank you for your help.
Alain
To specify my request -I wish a switch, for example in the Gauges of FSX folder, "CPT.Toggles.808.cab",-Switch Battery, which commands the Shift + E + 3 function, and which lights a warmer, for example in the gauge "[St_Tracker]"-Warn Amb! And so the corresponding.xml file!
The switch's BMPs are in the basic, so free FSX Gauges?
However to use the Warn Amber light, I will have to request authorization from Soh, Milton, and?
The use of another lights free of rights is of course possible.
Thank you for your help.
Alain
tgycgijoes
Members +
G7 ST-Tracker Team
The ST Tracker and the COD and the E1 Stoof were created by the G7 Team. I don't know who did the gauges or the bmp's whether it was Milton or someone else. You have to PM him and find out. Then get back to me with exactly what you want...switch...light...xml code requirement etc. and I'll see if I can help you.
The ST Tracker and the COD and the E1 Stoof were created by the G7 Team. I don't know who did the gauges or the bmp's whether it was Milton or someone else. You have to PM him and find out. Then get back to me with exactly what you want...switch...light...xml code requirement etc. and I'll see if I can help you.
Hi Alain, et al,
You may use and modify your version of the package any way that you wish without further contacts with me.
These packages were originally created in 2012 so I remember very little about them. All my files were archived years ago.
Good luck and enjoy.
You may use and modify your version of the package any way that you wish without further contacts with me.
These packages were originally created in 2012 so I remember very little about them. All my files were archived years ago.
Good luck and enjoy.
Hello Milton,
-Thank you for your response!
Thank you for the authorization to use and modify your gauges!
So I am looking for someone who could adapt the "Bomb Bay Door" command of the Gauge Rosa26.Cab has the SHIFT +E +3 action, and to associate this action with a Light WARN RED (OFF AND ON) of the gauge St_tracker.cab
Thank you who can help me!
Good day to all!
Alain
-
-Thank you for your response!
Thank you for the authorization to use and modify your gauges!
So I am looking for someone who could adapt the "Bomb Bay Door" command of the Gauge Rosa26.Cab has the SHIFT +E +3 action, and to associate this action with a Light WARN RED (OFF AND ON) of the gauge St_tracker.cab
Thank you who can help me!
Good day to all!
Alain
-
tgycgijoes
Members +
If I Understand
I checked out the model animations in Model Converter X and I don't think that I can do this for you sorry. Maybe someone else will step up.
I checked out the model animations in Model Converter X and I don't think that I can do this for you sorry. Maybe someone else will step up.