-
There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.
If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.
Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.
The Staff of SOH
Fw190A late variants released!
- Thread starter Mathias
- Start date
Steven190
Charter Member 2016
I have a problem with the cockpit view, I have no frame work around the cockpit. It is a new install under Vista. I am doing some repaints, too and did a fresh FSX install on my Vista machine, and just added the CH FW190A late to the install.
All I have is the glass and instrument panels. I can see the outline of the cockpit but it is transparent. It is for all versions of FW
Is there a setting I need to change?
Any ideas?
All I have is the glass and instrument panels. I can see the outline of the cockpit but it is transparent. It is for all versions of FW
Is there a setting I need to change?
Any ideas?
That's always possible, Mathias -- and I haven't seen (heard?) it enough to be sure about anything. But these are the only planes where I have noticed this problem. The crucial question: are other people experiencing this problem? If not, then obviously it's an issue with my system and not the 190 itself -- and that's what I'm trying to determine.
David,
During beta testing I have spend many hours in the cockpit from these FW190s and I have never experienced any problems like you the ones you are describing. But I realise that I have flew only a part of these hours in the current configuration.
I know how the sounds of the Classic Hangar FW190 work and I can't really find a logical cause for the problems you are describing.
Some history about the pilot of "Uschi".
Walter Köhne served with JG52 already in 1940 and participated in the invasion of Russia in 1941. He was badly wounded in June 1941, which took him away from his duties for a long period. Nevertheless he scored 12 victories at the Eastern front before he was transferred to JG1 in the Netherlands in 1943. He survived the war with 30 victories from which 15 on four-engine bombers.
Cheers,
Huub
During beta testing I have spend many hours in the cockpit from these FW190s and I have never experienced any problems like you the ones you are describing. But I realise that I have flew only a part of these hours in the current configuration.
I know how the sounds of the Classic Hangar FW190 work and I can't really find a logical cause for the problems you are describing.
Some history about the pilot of "Uschi".
Walter Köhne served with JG52 already in 1940 and participated in the invasion of Russia in 1941. He was badly wounded in June 1941, which took him away from his duties for a long period. Nevertheless he scored 12 victories at the Eastern front before he was transferred to JG1 in the Netherlands in 1943. He survived the war with 30 victories from which 15 on four-engine bombers.
Cheers,
Huub
First question:
Is your FSX patched to Service Pack 2?
Second:
Is texture_max_load=2048 enabled in the FSX.cfg?
Third:
If you enabled "high resolution" with the cockpit texture manager, return to "default resolution" and see if that cures it (shortcut in the start menu, classics hangar folder).
Steven190
Charter Member 2016
Thanks for the reply
nothing worked Mathias
It is Vista with SP2
Changed the texture_max_load to 2048, it made most of the external textures disappear only a few showed.
I tried lowering the valve to 1024 and the textures showed up, but still have the limited internals.
Then I changed the manager back and forth from High to Default Resolution and it made no difference.
nothing worked Mathias
It is Vista with SP2
Changed the texture_max_load to 2048, it made most of the external textures disappear only a few showed.
I tried lowering the valve to 1024 and the textures showed up, but still have the limited internals.
Then I changed the manager back and forth from High to Default Resolution and it made no difference.
Interesting. That appear to be exactly those textures that are toggled via the manager.
I suppose the answer is no, but did you do any changes to the Fw190 files, renaming folders, moving textures, resaving in a different format or editing aircraft.cfg or texture.cfg?
Also please check the following folders:
FSXroot\SimObjects\Airplanes\Classics_Hangar_Fw190A-5\texture.CHH
FSXroot\SimObjects\Airplanes\Classics_Hangar_Fw190A-5\texture.CHL
Each folder should hold a single file "ClassicsHangar" without an extension.
Also there should be 7 files with extennsion dds in one folder whereas the other folder has 7 files with extension dd_.
Also each of the other texture.x folders in any of the Fw190's should have those folders referenced in the texture.cfg's fallback section like this:
fallback.x=..\..\Classics_Hangar_Fw190A-5\texture.CHH
fallback.x=..\..\Classics_Hangar_Fw190A-5\texture.CHL
Just make a spot check on the texture.cfg.
Please let me know if there's anything wrong with either the CHH or CHL texture folder or the texture.cfg.
Thanks!
I suppose the answer is no, but did you do any changes to the Fw190 files, renaming folders, moving textures, resaving in a different format or editing aircraft.cfg or texture.cfg?
Also please check the following folders:
FSXroot\SimObjects\Airplanes\Classics_Hangar_Fw190A-5\texture.CHH
FSXroot\SimObjects\Airplanes\Classics_Hangar_Fw190A-5\texture.CHL
Each folder should hold a single file "ClassicsHangar" without an extension.
Also there should be 7 files with extennsion dds in one folder whereas the other folder has 7 files with extension dd_.
Also each of the other texture.x folders in any of the Fw190's should have those folders referenced in the texture.cfg's fallback section like this:
fallback.x=..\..\Classics_Hangar_Fw190A-5\texture.CHH
fallback.x=..\..\Classics_Hangar_Fw190A-5\texture.CHL
Just make a spot check on the texture.cfg.
Please let me know if there's anything wrong with either the CHH or CHL texture folder or the texture.cfg.
Thanks!
bmd
Charter Member
Bonjour Huub,
I have downloaded your new repaints. wonderful. A great art work. Bravo
It is a pleasure to fly the CH Fw190A-5. The chalenge for me is to learn how to correctly pilot the Fw190A-5 which does not have a vertical speed indicator. Have you some advice to help me to maintain a level flight in the absence of a vertical speed indicator?
Have a good day
Benoit
I have downloaded your new repaints. wonderful. A great art work. Bravo
It is a pleasure to fly the CH Fw190A-5. The chalenge for me is to learn how to correctly pilot the Fw190A-5 which does not have a vertical speed indicator. Have you some advice to help me to maintain a level flight in the absence of a vertical speed indicator?
Have a good day
Benoit
Thanks benoit!
To stay level without a variometer you have the altitude indicator and as they say over here "fly with your butt". We can't simulate that prickle in the rear in FSX but I think the altimeter does quite good plus situational awareness, watching the horizon, looking over wings etc. A well trimmed plane should help either.
EDIT: I forgot you also have the artificial horizon in the late variants.
To stay level without a variometer you have the altitude indicator and as they say over here "fly with your butt". We can't simulate that prickle in the rear in FSX but I think the altimeter does quite good plus situational awareness, watching the horizon, looking over wings etc. A well trimmed plane should help either.
EDIT: I forgot you also have the artificial horizon in the late variants.
Hi Benoit,
I'm glad you like the repaint, still more to come
Like Mathias already said, use the artficial horizon and altimeter. When you trim pitch use the button in the left-hand side console as it is more accurate then pre-programmed buttons on joysticks in most cases.
When you do this for the first time(s) you can best use Ctrl-Z to display your altitude (and vertical movement). After a few times you most probably won't need this anymore.
Good luck and enjoy,
Huub
I'm glad you like the repaint, still more to come
Like Mathias already said, use the artficial horizon and altimeter. When you trim pitch use the button in the left-hand side console as it is more accurate then pre-programmed buttons on joysticks in most cases.
When you do this for the first time(s) you can best use Ctrl-Z to display your altitude (and vertical movement). After a few times you most probably won't need this anymore.
Good luck and enjoy,
Huub
Steven190
Charter Member 2016
I have not changed any files, except the "texture_max_load=XX" in the App. Data section
All files are there in their correct form.
I think it is probably a Vista thing that it is doing. Like CFS3 I shut it down normally and now it will not play, just CTD after the first screen.
I have noticed that the view window in the main screen, sometimes the plane is invisible except a few parts, then if you change planes to another, it will show up normally, but will have the missing panels in the cockpit mode.
All files are there in their correct form.
I think it is probably a Vista thing that it is doing. Like CFS3 I shut it down normally and now it will not play, just CTD after the first screen.
I have noticed that the view window in the main screen, sometimes the plane is invisible except a few parts, then if you change planes to another, it will show up normally, but will have the missing panels in the cockpit mode.
I suppose your opening screen shows something else than the Fw190?
Please check if the following two actions help:
1. In the graphics card's control panel set Anti Aliasing and Anisotropic Filtering to "application controlled".
2. Delete or rename the FSX.cfg in the user folder so that it gets rebuild as you start FSX the next time.
Next run FSX with the Fw190 once without applying the 2048 edit to the cfg.
There weren't many in FS2004 and as far as I know there aren't any in FSX.
I normally fly from Gütersloh by Jim Dhaenens or one of the East German airfields by Guido Weiss. This scenery does not really reflect Luftwaffe airfields like they looked during WW-II, but the scenery does contain several buildings which were also used during WW-II.
As there are far more "standard" British buildings here are more British airfields avaialble. Hopefully Jim will make some additional "Luftwaffe" buildings so more German airfields can be created (this is a bold hint
).Cheers,
Huub
Lionheart's "Operation Valkyrie" had several of these; you can find my review on AVSIM. The transition to FSX was uneven, but most of the fields worked fine for me. The trick is going to be finding the FSX version, since it's no longer for sale.