-
There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.
If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.
Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.
The Staff of SOH
GA_C46_v2 conversion
- Thread starter braveheart77521
- Start date
dvslats
Charter Member
Conversion Of Libarrdo Guzman's C-46 to CFS2.zip
A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - American
Description: Libarrdo Guzman has graciously allowed me to convert and upload his rendition of the Curtis C-46 Comando.
Thank you Libarrdo!
This model has all animations active for cfs2 plus a beautiful virtual cockpit.
Credits for the original FS2004 aircraft:
Libarrdo Guzman, Tom Gibson, Greg Pepper
Credits for the original CFS2 aircraft:
Dave Slaski, Mack, (aka Braveheart) Kelticheart for his prop texture.
Mack put together a really nice panel with cfs2 compatible gauges in both the 2D and VC cockpit. Included are an explanation of the animation keys in the “Notes” file along with a checklist file. Also a modified air flie and damage profile.
Thank You Mack,
Enjoy, Dvslats
To check it out, rate it or add comments, visit Conversion Of Libarrdo Guzman's C-46 to CFS2.zip
The comments you make there will appear in the posts below.
A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - American
Description: Libarrdo Guzman has graciously allowed me to convert and upload his rendition of the Curtis C-46 Comando.
Thank you Libarrdo!
This model has all animations active for cfs2 plus a beautiful virtual cockpit.
Credits for the original FS2004 aircraft:
Libarrdo Guzman, Tom Gibson, Greg Pepper
Credits for the original CFS2 aircraft:
Dave Slaski, Mack, (aka Braveheart) Kelticheart for his prop texture.
Mack put together a really nice panel with cfs2 compatible gauges in both the 2D and VC cockpit. Included are an explanation of the animation keys in the “Notes” file along with a checklist file. Also a modified air flie and damage profile.
Thank You Mack,
Enjoy, Dvslats
To check it out, rate it or add comments, visit Conversion Of Libarrdo Guzman's C-46 to CFS2.zip
The comments you make there will appear in the posts below.
dvslats
Charter Member
Thanks Worthless.
Hey guys and gals, I received a PM concerning "crash to desktop" with this bird.
Looks like the culprit is the Sperry mkIII auto pilot gauge.
For now, rename it in your gauges folder or move it out completely.
I'll see about getting it fixed in the panel.cfg.
Till Later, Dave
braveheart77521
SOH-CM-2023
sperryIII gauge
Dave
The sperryIII gauge works fine in all my installations of CFS2. However, I suggest that it might help to delete the autopilot section of the aircraft folder. I discovered it would not work in the VC panel of the C-46A, so I substituted other gauges there. The replacement air file and DP seemed to clear up and neutralize the Sperry gauge, and allow the replacement auto pilot to work fine. But I am still trying to figure out what the problem is?
I am working on a version of the panel with a static Sperry autopilot.
Mission and others
If you are interested in additional skins for this plane, go to Simivation. In the search section, type in c-46A, any. Two pages should come up. At the bottom of the first page are three skins:
C-46A China (OD)
C-46A Tinker Bell (OD)
C-46A China Doll (Silver)
These are skins for the GA_C46A.
Its a great plane, Thanks Dave,
Mack (Braveheart)
Dave
The sperryIII gauge works fine in all my installations of CFS2. However, I suggest that it might help to delete the autopilot section of the aircraft folder. I discovered it would not work in the VC panel of the C-46A, so I substituted other gauges there. The replacement air file and DP seemed to clear up and neutralize the Sperry gauge, and allow the replacement auto pilot to work fine. But I am still trying to figure out what the problem is?
I am working on a version of the panel with a static Sperry autopilot.
Mission and others
If you are interested in additional skins for this plane, go to Simivation. In the search section, type in c-46A, any. Two pages should come up. At the bottom of the first page are three skins:
C-46A China (OD)
C-46A Tinker Bell (OD)
C-46A China Doll (Silver)
These are skins for the GA_C46A.
Its a great plane, Thanks Dave,
Mack (Braveheart)
Last edited:
dvslats
Charter Member
I finally had a chance to load the other skins you sent me Mack.
Textures are done by mvg3d, no less. Figured it was time for the OD scheme after seeing the original silver several hundred times during the conversion.
Don't get me wrong, Libardo's original silver is nicely done. Just time for a change. ;-)
Textures are done by mvg3d, no less. Figured it was time for the OD scheme after seeing the original silver several hundred times during the conversion.
Don't get me wrong, Libardo's original silver is nicely done. Just time for a change. ;-)
dvslats
Charter Member
Interim Panel
Thanks for the compliments Rami and mvg3d.
The real work was done by Mr. Guzman and others that did the design work. My hat is off to them.
For the time being I have put together a panel layout with basic CFS2 gauges for those with CTD problems.
It is not as accurate as Mack's, but it will do for a holdover. You'll be in the air at least.
Included in the file is an .mdl with lower reflectivity for olive drab paint schemes.
An airfile fitted to this gauge set-up plus aircraft.cfg, borrowed from one of bearcat241's conversions.
The file is in 7.zip format because it really cuts down the size of the compressed archive.
I hope this will not be a problem.
Link
Dave
PS: If the link is a problem I can email also. dvslats ǻ gmail.com
Just remove the goofy a and spaces.
Thanks for the compliments Rami and mvg3d.
The real work was done by Mr. Guzman and others that did the design work. My hat is off to them.
For the time being I have put together a panel layout with basic CFS2 gauges for those with CTD problems.
It is not as accurate as Mack's, but it will do for a holdover. You'll be in the air at least.
Included in the file is an .mdl with lower reflectivity for olive drab paint schemes.
An airfile fitted to this gauge set-up plus aircraft.cfg, borrowed from one of bearcat241's conversions.
The file is in 7.zip format because it really cuts down the size of the compressed archive.
I hope this will not be a problem.
Link
Dave
PS: If the link is a problem I can email also. dvslats ǻ gmail.com
Just remove the goofy a and spaces.
kelticheart
Charter Member
Splendid bird, Dvslats!
Many thanks to you Dvslats, to the original authors and to all the people involved in the conversion project.
Cheers!
KH
Many thanks to you Dvslats, to the original authors and to all the people involved in the conversion project.
Cheers!
KH
braveheart77521
SOH-CM-2023
Revised panel
Revised Panel
I removed the Sperry III gauge, and replaced it with a static picture in the main panel. I replaced many of the gauges with standard ones (P-38F, etc) for those having trouble. I also cleaned up the quadrant panel. I also added a few new gauges. I included a revised gauge file.
If you are happy with the original panel, just remove the Sperry III gauge and replace the main panel BMP inclosed.
Revised Panel
I removed the Sperry III gauge, and replaced it with a static picture in the main panel. I replaced many of the gauges with standard ones (P-38F, etc) for those having trouble. I also cleaned up the quadrant panel. I also added a few new gauges. I included a revised gauge file.
If you are happy with the original panel, just remove the Sperry III gauge and replace the main panel BMP inclosed.
Last edited:
dvslats
Charter Member
Hey Mack,
Tried it out and it looks and functions perfectly.
Our highly competent librarian swapped the old one with your revision.
It's now in the original D/L.
Till Later,
Dave
