• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

GlobalEnv_AC_Chrome - big problems

C

CBris

Charter Member
... for now.

Does anyone here know the workings of this dds texture in the FSX/texture folder.

I thought I did...

OK, the problem - I have the DirectX SDK and the DirectX TextureTool. I have created a new GlobalEnv_AC_Chrome.dds image and it works on other aircraft. I have got that bit right and I can see the GlobalEnv_AC_Chrome working on other planes, for example the P51 racer. I now have three GlobalEnv_AC_Chrome files - the default, the one that came with the Icarus Pitts and my own New one.

They ALL work on other planes - the P-51 is shown here:



If you look closely at the enlargements, you will see the differences (clue: observe the Mustang nose and the reflection there)

BUT I cannot get the GlobalEnv_AC_Chrome to work at all on the Eagles anymore, irrespective of which one is in the FSX/Texture folder.

No matter what I do, the Eagles all show NO GlobalEnv_AC_Chrome see here:



Does anyone have any idea as to why the IRIS Eagle no longer looks for the global envmap?

This is what that Eagle should look like:

 
Incidentally - for those readers who do know their way around the DirectX Texture Tool: I don't!

But I have compared the original and the Icarus "Globalenv" cubic bitmaps. The default is A8R8G8B8 and the Icarus one is X8R8G8B8 (32 bit save formats folks). I have swapped these, I have used both 64 bit and 32 Bit versions of the DirectX Texture Tool.

I am doing something wrong, but what?
 
Don't get me wrong, Pekka, I was just going to write "Of course I do, what kind of a question is that to ask a painter?"

...and then I checked!

Folks - the IRIS Eagles DON'T have a fallback outside of the aircraft folders...

This is the standard IRIS fallback:

[fltsim]

fallback.1=..\Texture.Common
fallback.2=..\Texture.VC
fallback.3=..\Texture.Bump
fallback.4=..\Texture.Specular


Those who know (I ought to) will see that any default aircraft has the following standard lines:

[fltsim]

fallback.1=..\texture
fallback.2=..\..\..\..\Scenery\Global\texture
fallback.3=..\..\..\..\..\..\Scenery\Global\texture

All three lines are important, but the first line could be the culprit. Hang on...

If this works, then the fallback should/might be:

[fltsim]

fallback.1=..\Texture.Common
fallback.2=..\Texture.VC
fallback.3=..\Texture.Bump
fallback.4=..\Texture.Specular
fallback.5=..\texture
fallback.6=..\..\..\..\Scenery\Global\texture
fallback.7=..\..\..\..\..\..\Scenery\Global\texture

More in a bit, after I check results...

Thinks... that first texture is only one layer up to the repaint folder...

Nope. Sorry Pekka. Even editing the texture fallback to the FSX root directory and forcefully pointing at the "Texture" folder hasn't worked.

So... I did something to upset the IRIS Christen Eagles - all of them, But what? This is intriguing.

Thanks for a good first pointer, Pekka - pity I didn't find the answer there - that would have been great...
 
I know if you mess with the default one and don't use the app in FSX SDK it will mess it up, I did one awhile back ago that I use on all my paints but truthfully, I've already forgot how I did it, LOL but I add it to all my skins now, it really makes a difference. Nice paints! :ernae:
 
Edit:Sorry re-read the above

So even if you replace the default env its still messed up?...
humm cant say ive seen that before even when making my own env's

btw for re-building Cubemaps i found Ati's CUBEMAPGEN to be very handy combining it with a large number of env shots and autostitch got me some real nice env maps

hope you get it sorted

Laters
steve
 
Well...

We all know the Eagles worked before I did something odd.

My amended globalenv textures work on other models.

I can open the mdl files (copied out of FSX and then opened with wordpad...)
 
I think I'll go to bed and have a fresh look in the morning. I have three GlobalEnv_AC_Chrome files that still work on other aircraft (Haven't had time to check all 185 planes and 500+ paints...)

I have bu66ered something up on the Eagle, so I may try a re-install tomorrow.

Tools, Gizmo? I used the DX Texture Tool in the DX SDK - as instructed to do so by the FSX SDK.

I will have a look at the ATI tool...
 
have you checked to see if the egale has a custom reflection in the texture folders??
 
I changed nothing in the texture folders. There were no GlobalEnvs there before nor after... still trying... Maybe Iris will answer in the Iris forums?
 
Did you move the aircraft to a directory outside of the FSX directory?

If so, you can copy your cubic map into the texture.common folder or you can try to change your texture.cfg to:

[fltsim]

fallback.1=..\Texture.Common
fallback.2=..\Texture.VC
fallback.3=..\Texture.Bump
fallback.4=..\Texture.Specular
fallback.5=..\texture
fallback.6=..\..\..\..\Scenery\Global\texture
fallback.7=..\..\..\..\Texture

the last entry points to the main FSX texture folder.
This shouldn't be necessary, if the aircraft is located in the FSX\simobjects\airplanes folder.
 
Hey Chris

Ive used the ATI cubemapgen tool because it has a nice GUI that allows you to pipe in your - + XYZ cube images a check them in realtime a sky box and globe setting,it also takes the guess work out of making sure your exporting in the correct .dds cubemap format

Just had a dig around my bookmarks and found the FSD thread where i first read about it

http://www.fsdeveloper.com/forum/showthread.php?t=7389

laters
Steve
 
Mr. Chris B. "CBris,"
I, too, have used the Icarus Pitts' GlobalEnv_AC_Chrome.dds overthe default one. However, I found that the reflections are NOT correct; it reflects Land when actually over oceans and that didn't seem right to me. (See pic below).



Your's, however, looks like a proper reflection. Would you consider sharing your's (pictured below) as FREEWARE?



Thank you!:ernae:
 
James, the chrome texture is a fixed image, rather than an actual reflection. Chris's plane would look just as out of place over the Grand Canyon as Icarus's looks over Plum Island. It's one of those little annoyances masquerading as a feature in FSX.
 
Hello James,

The first one is indeed the Icarus "global"

The second one is a "global" I created - it is set around Plum Island and as everyone can see, there is even a "Chase Plane" set into the "Z Negative" axis of the "Global" - if you look very closely, you'll even recognise a Christen Eagle...

But until I resolve the issue as to why the Christens are suddenly not "reading" a correctly created GlobalEnv_AC_Chrome, everyone has to wait.

By the way, the odd thing, readers. is that I have replaced the original Icarus Global and still theIris Christen refuses to read any "Global". I may reinstall in the morning
 
Hi Bill, didn't see you there... parallel posting.

It was my intention to see if A. I could put a cubic envmap together and B. maybe start a mini series as I went along. At the moment it is a very simple "PI" cube, but I am getting the drift...
 
Mr. Bill Womack "spotlope,"

spotlope said:
...the chrome texture is a fixed image, rather than an actual reflection. Chris's plane would look just as out of place over the Grand Canyon as Icarus's looks over Plum Island. It's one of those little annoyances masquerading as a feature in FSX.
Click to expand...
I figured as much; thanks for the confirmation! :wavey:


Mr. Chris B. "CBris,"

CBris said:
...The first one is indeed the Icarus "global"

The second one is a "global" I created - ...But until I resolve the issue as to why the Christens are suddenly not "reading" a correctly created GlobalEnv_AC_Chrome, everyone has to wait....
Click to expand...
No Problem; I can wait... Thanks so much! :wavey:
 
I think I have the answer

OK, what I did to diagnose...

I started today with the Icarus cubic maps installed from the original Icarus patch (Plural - more later) and the Eagles worked fine.

Mustang: and Eagle:

Then I checked the format of the Icarus cubes - they are X8R8G8B8 - and I compared this to the original FSX cubes, which are A8R8G8B8. So I edited my GlobalEnv_AC_Chrome to X8R8G8B8 format.

Shut off sim. Moved my GlobalEnv_AC_Chrome to the textures folder. Restarted sim and flew Mustang and Eagles

Mustang: and Eagle:

So if you look closely you can see that my new cubic map works on the Mustang but not on the Eagle. WHY?

Then I remembered the Icarus patch consists of TWO envmaps, the second is called "GlobalEnvTest.dds" so I removed it and... hey presto! Mustang stays with my new cubemap and the Eagle goes non-reflective.



See - all dull and matt.

So... the answer is that the IRIS Christen Eagle calls on a cubic map called "GlobalEnvTest.dds" and not on the "GlobalEnv_AC_Chrome.dds" How come David is calling a reflection map created by Icarus? But anyway - copying my "GlobalEnv_AC_Chrome.dds" and saving it in the Texture folder as "GlobalEnvTest.dds" has SOLVED the problem! Now I can go fix my cubic maps.

Look:

There was nothing wrong with either my cubic maps or with my installation of the Christen Eagle. It is merely that the Eagle calls a different cubic environment map filename.
 
Mr. Chris B.,

You should post this on the IRIS forums; they need their customers help for things like this.
Good Job! :wavey:
 
You must log in or register to reply here.
Back
Top