-
There seems to be an up tick in Political commentary in recent months. Those of us who are long time members of the site we know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religiours commentary out of the fourms.
If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.
Please note any post refering to a politicion will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment amoung members. It is a poison to the community. We apprciate compliance with the rules.
The Staff of SOH
I want to start modelling......
- Thread starter Cag40Navy
- Start date
yes master yoda, im ready to explore the unknown....
Prowler1111
Charter Member 2011
..you´ll finish what you start....do it or don´t, there is no try...
Try these:
Best tutorial available:
http://www.flightsimonline.com/C162/
Best FS-dev forums (with twisted sense of humour
):
http://www.aerodynamika.com/cgi-bin/yabb/YaBB.cgi
Best tutorial available:
http://www.flightsimonline.com/C162/
Best FS-dev forums (with twisted sense of humour
):http://www.aerodynamika.com/cgi-bin/yabb/YaBB.cgi
B
BananaBob
Guest
I'm not good enough looking to model, LOL :ernae:
Always great to have new guys getting interested in modelling so good luck and most of all have fun exploring the world of poligons and vertices.
It's always a good idea to begin with step #1 so I'd suggest to do put the idea of making an aircraft in the background for a bit and do the tutorials first that come with Gmax, one by and in order.
Most struggle because they want too much too fast and just forget to learn the toolbox.
It's always a good idea to begin with step #1 so I'd suggest to do put the idea of making an aircraft in the background for a bit and do the tutorials first that come with Gmax, one by and in order.
Most struggle because they want too much too fast and just forget to learn the toolbox.
Thanks, i will always keep that in mind when i start to model. if i get the ropes, i might make a WIP. but that wont be for a while....Always great to have new guys getting interested in modelling so good luck and most of all have fun exploring the world of poligons and vertices.
It's always a good idea to begin with step #1 so I'd suggest to do put the idea of making an aircraft in the background for a bit and do the tutorials first that come with Gmax, one by and in order.
Most struggle because they want too much too fast and just forget to learn the toolbox.
I agree with Mathias. I am new to the modelling community as well and havent done anything really so far. A little trying on aircraft fuselage shapes here and there, but I want to know the fundamentals of a program like Gmax/Max first. That makes you much more efficient in the end and you know what and why you do it. Therefore I concentrate on making basic and medium complexity stuff, learning the interface etc.
If you are into video training I can make the following suggestion:
http://www.3dbuzz.com/xcart/product.php?productid=38&cat=10&page=1
I friend of mine is doing Maya and used these training courses and gave me a hint. I ordered myself the 3ds Max Fundamentals series for $99.00 and it is absolutely worth the money. Well these $99.00 is really nothing compared to the awesome training you will get. You will start with the interface basics, then move to simple models first, going all the way up. You even do am F-14 Tomcat, so there will be aircraft modelling in this course as well and it is sooo cool. I am almost there, to start on it.
Keep in mind though, that these training videos are based on 3ds Max 9, I think, but you can transfer a lot to Gmax. Most of the things are very similar and you can directly use it in Gmax. 3ds Max might have more complex functionality, but you dont need that really to model a good aircraft from what I have seen. There are also a lot of training videos on animations, texture baking, texturing with Photoshop etc. So very nice content. All in all you get like 105 hours of video training. Have a look at the sample videos, in order to check if you like the teaching style.
I was lucky to get a student license of 3ds Max 2009, so I can directly work on the things presented in the course. I might get lucky and get a commercial version after it, but if not, I will go back to Gmax and I know that the transfer back will be no problem at all.
Its up to you and you learning style, but I just wanted to tell you what I am currently doing in order to learn a complex application like Gmax/Max and these videos are helping me a lot. When you then read awesome tutorials like Milton's C162, it all makes much more sense, if you know the basics and the tools.
Hope I could provide a little help. From newbie to newbie
If you are into video training I can make the following suggestion:
http://www.3dbuzz.com/xcart/product.php?productid=38&cat=10&page=1
I friend of mine is doing Maya and used these training courses and gave me a hint. I ordered myself the 3ds Max Fundamentals series for $99.00 and it is absolutely worth the money. Well these $99.00 is really nothing compared to the awesome training you will get. You will start with the interface basics, then move to simple models first, going all the way up. You even do am F-14 Tomcat, so there will be aircraft modelling in this course as well and it is sooo cool. I am almost there, to start on it.
Keep in mind though, that these training videos are based on 3ds Max 9, I think, but you can transfer a lot to Gmax. Most of the things are very similar and you can directly use it in Gmax. 3ds Max might have more complex functionality, but you dont need that really to model a good aircraft from what I have seen. There are also a lot of training videos on animations, texture baking, texturing with Photoshop etc. So very nice content. All in all you get like 105 hours of video training. Have a look at the sample videos, in order to check if you like the teaching style.
I was lucky to get a student license of 3ds Max 2009, so I can directly work on the things presented in the course. I might get lucky and get a commercial version after it, but if not, I will go back to Gmax and I know that the transfer back will be no problem at all.
Its up to you and you learning style, but I just wanted to tell you what I am currently doing in order to learn a complex application like Gmax/Max and these videos are helping me a lot. When you then read awesome tutorials like Milton's C162, it all makes much more sense, if you know the basics and the tools.
Hope I could provide a little help. From newbie to newbie
krazycolin
Banned
"I'm not afraid!" "eh... you will be... you will be..."
Good stuff! I would suggest that you do the tutorials in GMAX first and foremost. That way you have a good base to start with. After that, you can start working on planes... (Note that this is only a suggestion)...
Good stuff! I would suggest that you do the tutorials in GMAX first and foremost. That way you have a good base to start with. After that, you can start working on planes... (Note that this is only a suggestion)...
My advice is this. Go to a local community college and see if they have a class in 3DS Max. I have seen classes for around $60 and Gmax is a basic stripped version of 3DS Max. You can learn the interface from that. The interface is VERY complex and confusing, so it makes reading tutorials almost pointless without knowing the interface first. Also there are DVD's you can buy that shows you 3DS.
And a tip from a pro. Dont strive for perfection. Flaws make it more realistic, since real aircraft are also not perfect. Also, stay away from Mesh smooth. I see way too many new artist's rely too much on that tool. Ow, and your best friend is Ctrl Z, but your worst nightmare is Ctrl X. Have fun!
And a tip from a pro. Dont strive for perfection. Flaws make it more realistic, since real aircraft are also not perfect. Also, stay away from Mesh smooth. I see way too many new artist's rely too much on that tool. Ow, and your best friend is Ctrl Z, but your worst nightmare is Ctrl X. Have fun!
M
MCDesigns
Guest
LMAO, LOVE the Yoda references!
The key is persistence! When I first started with Gmax it made no sense whatsoever, tried for months, went back to FSDS, tried for months, went back to FSDS, tried for months, gave up! Got a copy of 3DSMax and that made sense for some reason. Came back to FS and Gmax, made sense, go figure, LOL.
Also making an aircraft for FS is more than just modeling (which is why I have never released any of mine, LOL), that's the easy part.
The key is persistence! When I first started with Gmax it made no sense whatsoever, tried for months, went back to FSDS, tried for months, went back to FSDS, tried for months, gave up! Got a copy of 3DSMax and that made sense for some reason. Came back to FS and Gmax, made sense, go figure, LOL.
Also making an aircraft for FS is more than just modeling (which is why I have never released any of mine, LOL), that's the easy part.
If doing the Gmax tutorials (and you really should), do them one at a time, IN ORDER.... Very important. They teach you in steps where the tools are and how they work. Thus if you jump from one to 5, you miss where the tools are through the last steps and cannot finish step 5.
Also, in doing the Gmax tutorials, do not go to the next level until you have memorised EVERYTHING on that step you are on. THEN go to the next step. Burn the tools into your mind, where they are, how they work. That is the most important thing to learn about Gmax....
Alot of guys went to the Gmax tutorial, right to the P-38, and couldnt figure out why the instructions were so vague. All the tools for it are taught in the previous tutorials. (I'm one of them. I didnt do the early ones.. I went straight for the plane.. I quit Gmax perhaps 3 times before finally starting at step 1).
Bill
Also, in doing the Gmax tutorials, do not go to the next level until you have memorised EVERYTHING on that step you are on. THEN go to the next step. Burn the tools into your mind, where they are, how they work. That is the most important thing to learn about Gmax....
Alot of guys went to the Gmax tutorial, right to the P-38, and couldnt figure out why the instructions were so vague. All the tools for it are taught in the previous tutorials. (I'm one of them. I didnt do the early ones.. I went straight for the plane.. I quit Gmax perhaps 3 times before finally starting at step 1).
Bill
Bjoern
worst developer ever
Best FS-dev forums (with twisted sense of humour
http://www.aerodynamika.com/cgi-bin/yabb/YaBB.cgi
Well, Felix is there, so whaddya expect? :d
As for modeling, try starting out with sceneries, say airport buildings or so. They're fairly simple to do and great to get the hang of the tools.
If you really want to challege yourself, learn Blender
. I've done my fair share of different 3d modelling tools including Autocad, 3ds Max and gmax, back when I was studying architecture, but the only real headache I was dealing with was Blender. And I agree with Gibbage, best way to start is if you can participate on some class teaching you the basics. After that it is very easy go by yourself to learn new tricks.
I've now been "3d free" for four years and don't miss it at all. Changing my profession was the best decision I've ever made LOL.
I've now been "3d free" for four years and don't miss it at all. Changing my profession was the best decision I've ever made LOL.