• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

New Breguet Alize (RFN)

For those having issues with that gauge not showing on the panel, here's the version I have which is working:
View attachment 24773

Unzip it and place directly into your FSX/gauge folder

Sylvain, if it's okay with you I'll leave this up long enough to help the couple of users who are having an issue with the gauge not showing.
 
"Fugly" is often in the eye of the beholder, and does not reflect the capabilities of the aircraft. The Grumman A-6 Intruder was no Marilyn Monroe among airplanes and it served in the fleet for over 30 years.
 
StormILM said:
For those having issues with that gauge not showing on the panel, here's the version I have which is working:
View attachment 24773

Unzip it and place directly into your FSX/gauge folder

Sylvain, if it's okay with you I'll leave this up long enough to help the couple of users who are having an issue with the gauge not showing.
Click to expand...
Thanks for trying, but this doesn't do it. It's basically the same gauge from the website.

There seems to be something else missing from the install that is preventing the gauge from showing in the VC. Also, I cannot make any changes to the TACAN or VOR ILS which prevents any meaningful navigation.

The VC, sounds, exterior and flight dynamics are really great. I missed flying the RAZBAM Alize from FS9 and was hoping this would fit the bill, but ... there is no gauge or way to navigate.

Thanks for trying.
 
WarHorse47 said:
Thanks for trying, but this doesn't do it. It's basically the same gauge from the website.

There seems to be something else missing from the install that is preventing the gauge from showing in the VC. Also, I cannot make any changes to the TACAN or VOR ILS which prevents any meaningful navigation.

The VC, sounds, exterior and flight dynamics are really great. I missed flying the RAZBAM Alize from FS9 and was hoping this would fit the bill, but ... there is no gauge or way to navigate.

Thanks for trying.
Click to expand...

HI,
It's hard to find out what is (not) going on just reading posts here... The dll needs to be put in FSX/Gauges folder with its 2 xml files to work. Secondly, it coded in C++ so there are some technical requirements to be run (look at the RFN gauge read me). After that, FSX should detect the new dll when you launch for the 1st time the plane by showing up 2 different validation windows : you have to say "Yes" to both questions.

If, having done this few points, the dll is still not OK (meaning, no Tacan indicator in the VC, no 2D Tacan indicator, no frequency management), then you're facing a very strange and specific issue...
Let me know if you had validated the 1st points and if it still not working?
Regards,
Sylvain
 
sparouty said:
HI,
It's hard to find out what is (not) going on just reading posts here... The dll needs to be put in FSX/Gauges folder with its 2 xml files to work. Secondly, it coded in C++ so there are some technical requirements to be run (look at the RFN gauge read me). After that, FSX should detect the new dll when you launch for the 1st time the plane by showing up 2 different validation windows : you have to say "Yes" to both questions.

If, having done this few points, the dll is still not OK (meaning, no Tacan indicator in the VC, no 2D Tacan indicator, no frequency management), then you're facing a very strange and specific issue...
Let me know if you had validated the 1st points and if it still not working?
Regards,
Sylvain
Click to expand...
I reinstalled all the latest gauges and there is no change. No Tacan or panel gauge showing.

I have the necessary C++ requirements, so that's not it. I've examined the panel.cfg and there's no error there. Not sure what else to look for.

Thanks for trying. I'm not going to pursue this any further, so unless someone else has a similar situation or solution please consider this issue closed.
 
TARPSBird said:
"Fugly" is often in the eye of the beholder, and does not reflect the capabilities of the aircraft. The Grumman A-6 Intruder was no Marilyn Monroe among airplanes and it served in the fleet for over 30 years.
Click to expand...

The A6 looks fine to me lol

This thing is like a beached whale haha!
 
Couldn't resist getting my paint brush out! :jump:

attachment.php
attachment.php
attachment.php


Not Quite ready yet still a few details to work out bit difficult without a paint kit and I'm pretty sure the Indian versions didn't have quite so many Antennas or topside roundels.
IF anybody can notice anything else I've gotten wrong please point it out won't you.
(Aside from the 'W' being a little on the small side and the grey on the tail plane rounding off in the wrong place.) Hopefully have it finished and submitted by the end of the weekend.

Hooky
 

Attachments

  • INSAlize1.jpg
    INSAlize1.jpg
    54.1 KB · Views: 0
  • INSAlize2.jpg
    INSAlize2.jpg
    46.3 KB · Views: 0
  • INSAlize3.jpg
    INSAlize3.jpg
    49.3 KB · Views: 0
I noticed (when I still had it installed) that it was a bit smaller than the models parked up on Foch. I'm sure that's as much to do with the scaling of Foch than anything else;) A nice model and it flies well but I got an odd Windows error so I've removed it for now. Will happily wait for the next beta;)

ATB
DaveB:)
 
Can anybody help me I'm in a bit of a fix. Can anybody tell me where this bit is mapped and to what texture file?
Somewhere there's this slab of grey that covers the top spine but i cant work out what it is.
attachment.php

I maybe asking an unanswerable question :banghead: :biggrin-new:. But any help at all would be appreciated.

Many Thanks

Hooky
 

Attachments

  • help.jpg
    help.jpg
    50.5 KB · Views: 4
Nice to see a Indain Alize! Should be perfect on the INS Vikrant repaint I did for the Majestic-class carrier by Lazarus.

Scrshot1030.jpg~original
 
Hooky, I'm not seeing the grey slab on my Alize, either 56 or 59. I painted Alz_FuseAft_T.dds solid pink just to experiment and the entire aft fuselage was pink, no grey panel as shown on your screen shot. Make a dupe of the same .dds file on your repaint and try the same thing I did and see what happens.
 
JensOle said:
Nice to see a Indian Alize! Should be perfect on the INS Vikrant repaint I did for the Majestic-class carrier by Lazarus.
Click to expand...

JensOle, have you uploaded that Vikrant repaint here or anywhere else? I'd like to have it.
 
Jens also I can't find the 60's deck textures you did for me either would be great if you could post them up for us I've been putting together a Ai carrier fleet for the Vikrant with ins lender class and colony class in attendance will post entries when I'm done
 
As many of my projects, it was regrettably never released. I have attached the paint for you guys to testView attachment 24927. No readme and no support files beside the vikrant textures. Enjoy and please report what you guys think about the paint!

The Vikrant paint represent the first deck layout as used with the Sea Harrier. The Alizes were to my knowledge still used on Vikrant at this time. Both cat and wires are still on the ship, but a high visible centreline marking similar as used on the British Sea Harrier carriers is painted on Vikrant.

View attachment 24927
 
TARPSBird said:
Hooky, I'm not seeing the grey slab on my Alize, either 56 or 59. I painted Alz_FuseAft_T.dds solid pink just to experiment and the entire aft fuselage was pink, no grey panel as shown on your screen shot. Make a dupe of the same .dds file on your repaint and try the same thing I did and see what happens.
Click to expand...

Thanks mate

On closer inspection it looks as if it is mapped funny and the grey area is mirrored from an area further up the fuselage the only way to limit lt is to move the grey further back than it should be in real life. But despite the artistic licence it doesn't look too abnormal hopefully the guys at RFN will address it once it comes out of beta. Will post up tonight and hopefully it will be up tomorrow.

Cheers

Hooky
 
Hooky, your repaint looked fine in the pics except for the odd grey panel. Whatever it is, it must be a part of the aft fuselage .dds file because everything aft of the cockpit was pink when I was experimenting. Thanks for your work, I'll grab it when you upload it. :encouragement:
 
You must log in or register to reply here.
Back
Top