-
There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.
If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.
Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.
The Staff of SOH
New panels and reticles by Stockplane!
- Thread starter stockplane
- Start date
stockplane
Charter Member
Thanks Rami, i hope make best projects in the future, i am an apprentice.
Best regards.
Best regards.
stockplane
Charter Member
Ki-43 panels.zip
A new entry has been added to Add-Ons Library, category CFS 2 Panels Add-Ons
Description: My series of cockpit for Ki-43 series I and II, for stock flyable plane and upgrade by B24Gui.
There are four panel two with reticle and two without.
I hope they will be usefull for someones.
Best regardsd.
To check it out, rate it or add comments, visit Ki-43 panels.zip
The comments you make there will appear in the posts below.
A new entry has been added to Add-Ons Library, category CFS 2 Panels Add-Ons
Description: My series of cockpit for Ki-43 series I and II, for stock flyable plane and upgrade by B24Gui.
There are four panel two with reticle and two without.
I hope they will be usefull for someones.
Best regardsd.
To check it out, rate it or add comments, visit Ki-43 panels.zip
The comments you make there will appear in the posts below.
stockplane
Charter Member
Thanks Rami. I am glad that my simple works like. As i said in the past reply unfortunately is the graphic job that is a bit difficult for me. I hope that someones make the background panel more accuracy.
An information please, if is possible, i have make two generic skins one for the Nieuport 11 and another for the Handriot HD1 for italian side, and a new cocvkpit for the Handriot, i need upload them separately or is possible upload in a unique package, in this case where.
Thank in advanced for a suiggestion about.
I hope next week finish the Ki-45 and Ki-46 cockpits.
Best regards.
An information please, if is possible, i have make two generic skins one for the Nieuport 11 and another for the Handriot HD1 for italian side, and a new cocvkpit for the Handriot, i need upload them separately or is possible upload in a unique package, in this case where.
Thank in advanced for a suiggestion about.
I hope next week finish the Ki-45 and Ki-46 cockpits.
Best regards.
stockplane
Charter Member
Thanks Gius!
My program is try make these panels: Ki-45, Ki-46, Ki-48, Ki-84, Ki-100 a rework of Ki-44 in another version
and then Mc202, Mc205, G55, BR.20 and SM.79
If you or other users have suggestion or ideas for cockpits, please post them here.
Best regards.
My program is try make these panels: Ki-45, Ki-46, Ki-48, Ki-84, Ki-100 a rework of Ki-44 in another version
and then Mc202, Mc205, G55, BR.20 and SM.79
If you or other users have suggestion or ideas for cockpits, please post them here.
Best regards.
stockplane
Charter Member
Hanriot HD-1 panel.zip
A new entry has been added to Add-Ons Library, category CFS 2 Panels Add-Ons
Description: Only a little rework of the cockpit for the beautifull Hanriot that you can find at SOH, plus two texture, one for the Hanriot and another for the Nieuport 11 that is at Aerocrate site, in Italian color.
The two texture are very very generic.
Have a good fun
To check it out, rate it or add comments, visit Hanriot HD-1 panel.zip
The comments you make there will appear in the posts below.
A new entry has been added to Add-Ons Library, category CFS 2 Panels Add-Ons
Description: Only a little rework of the cockpit for the beautifull Hanriot that you can find at SOH, plus two texture, one for the Hanriot and another for the Nieuport 11 that is at Aerocrate site, in Italian color.
The two texture are very very generic.
Have a good fun
To check it out, rate it or add comments, visit Hanriot HD-1 panel.zip
The comments you make there will appear in the posts below.
kelticheart
Charter Member
Lovely Hayabusa panel!
Stockplane:
Thank you!
KH
Stockplane:
Thank you!
KH
stockplane
Charter Member
Thanks Kelticheart!
Next week is possible that i upload the Ki-45, almost finish, and the Ki-46 cockpit for Akemi planes with VC too.
I am looking for documentation for the Ki-46 i am not sure if it has or not the gunsight. I have few datas about.
If someones have informations please post!
Best regards.
Next week is possible that i upload the Ki-45, almost finish, and the Ki-46 cockpit for Akemi planes with VC too.
I am looking for documentation for the Ki-46 i am not sure if it has or not the gunsight. I have few datas about.
If someones have informations please post!
Best regards.
stockplane
Charter Member
Kelticheart, i have miss ask you if you want make a mod for the Ki-45 :
In the VC cockpit the gunsight is opaque i have seen that you have jet solved this bug for the Akemi Zero,
is possible for you mod also it for the Ki-45?
Thaks in advanced.
In the VC cockpit the gunsight is opaque i have seen that you have jet solved this bug for the Akemi Zero,
is possible for you mod also it for the Ki-45?
Thaks in advanced.
kelticheart
Charter Member
Hi stockplane,
Akemi's Zero originally did not have a VC gunsight bug. My prop texture repaint caused it because I had not noticed, at first, the VC gunsight texture was part of it, according to Akemi's standards.
VC textures cannot usually be altered, unless the original author provided specific textures for it. Sometimes they can be found among the model textures.
If you are talking about Akemi's Ki-45 Toryu, the texture file attached below belongs to it. Note that the gunsight reticle texture is on the right lower corner of it. As I said before, it follows Akemi's texture mapping philosophy.
If this texture is missing, the VC gunsight will not show up.
I cannot do anything more than this, I hope this explanation will help.
Cheers!
KH
Attachments
stockplane
Charter Member
All clear Kelticheart, thanks.
Best regards.
Best regards.
stockplane
Charter Member
Ki-46II panel
This is my panel for Akemi Ki-46II recon plane, this plane isn’t armed and has a different cockpit respect the other Ki-46 type IIIb and IIIc.
These cockpits in a next upload.
I have made a new main panel with the engine controls and I have leave the VC cockpit made by B24 Gui in the your upgrade of this plane ( the upgrade you can find at SOH ).
Best regards.
This is my panel for Akemi Ki-46II recon plane, this plane isn’t armed and has a different cockpit respect the other Ki-46 type IIIb and IIIc.
These cockpits in a next upload.
I have made a new main panel with the engine controls and I have leave the VC cockpit made by B24 Gui in the your upgrade of this plane ( the upgrade you can find at SOH ).
Best regards.
stockplane
Charter Member
Ki-45 panel.zip
A new entry has been added to Add-Ons Library, category CFS 2 Panels Add-Ons
Description: This is my panel for Akemi and FDG Ki-45 plane, the cockpit is the same for both models, there is a new VC panel for Akemi, for FDG i have not made the VC cockpit because it is paint with the gauges so for the moment i have notmade an alternate VC cockpit for.
You can install it, in the two version, with or without the reticle gunsight.
Best regards.
To check it out, rate it or add comments, visit Ki-45 panel.zip
The comments you make there will appear in the posts below.
A new entry has been added to Add-Ons Library, category CFS 2 Panels Add-Ons
Description: This is my panel for Akemi and FDG Ki-45 plane, the cockpit is the same for both models, there is a new VC panel for Akemi, for FDG i have not made the VC cockpit because it is paint with the gauges so for the moment i have notmade an alternate VC cockpit for.
You can install it, in the two version, with or without the reticle gunsight.
Best regards.
To check it out, rate it or add comments, visit Ki-45 panel.zip
The comments you make there will appear in the posts below.
Reply...
Stockplane,
Nice job on everything. I hope you don't mind, but I included the update in the original Ki-43 package and moved it to the head of the line. That way, everything is less confusing.
Here is the Ki-43 link: http://www.sim-outhouse.com/sohforums/local_links.php?action=jump&catid=46&id=19753
Stockplane,
Nice job on everything. I hope you don't mind, but I included the update in the original Ki-43 package and moved it to the head of the line. That way, everything is less confusing.
Here is the Ki-43 link: http://www.sim-outhouse.com/sohforums/local_links.php?action=jump&catid=46&id=19753
stockplane
Charter Member
N1K2J new panel.zip
A new entry has been added to Add-Ons Library, category CFS 2 Panels Add-Ons
Description: A rework for the N1K2J panel with new background. (Alphasim freeware with some modifications)
Gunsight view with and without reticle and the type 4 gunsight.
I have also make little mod of VC cockpit.
Best regards.
To check it out, rate it or add comments, visit N1K2J new panel.zip
The comments you make there will appear in the posts below.
A new entry has been added to Add-Ons Library, category CFS 2 Panels Add-Ons
Description: A rework for the N1K2J panel with new background. (Alphasim freeware with some modifications)
Gunsight view with and without reticle and the type 4 gunsight.
I have also make little mod of VC cockpit.
Best regards.
To check it out, rate it or add comments, visit N1K2J new panel.zip
The comments you make there will appear in the posts below.
stockplane
Charter Member
Ki-46III panel.zip
A new entry has been added to Add-Ons Library, category CFS 2 Panels Add-Ons
Description: This is my panel for Akemi Ki-46III with or without B24 Gui upgrade that you can find here at SOH.
I have made a new main panel with the engine controls popup and I have leave the VC cockpit made by B24 Gui in the upgrade of this plane.
In the VC cockpit I have only replace the gauges.
It came with a modification of the gunsight Type 100 late production.
Next my step is try make the BR.20, SM.79 and Ki-61 panel, for me tree quite difficult works, i hope to be able realize them.
Best regards.
To check it out, rate it or add comments, visit Ki-46III panel.zip
The comments you make there will appear in the posts below.
A new entry has been added to Add-Ons Library, category CFS 2 Panels Add-Ons
Description: This is my panel for Akemi Ki-46III with or without B24 Gui upgrade that you can find here at SOH.
I have made a new main panel with the engine controls popup and I have leave the VC cockpit made by B24 Gui in the upgrade of this plane.
In the VC cockpit I have only replace the gauges.
It came with a modification of the gunsight Type 100 late production.
Next my step is try make the BR.20, SM.79 and Ki-61 panel, for me tree quite difficult works, i hope to be able realize them.
Best regards.
To check it out, rate it or add comments, visit Ki-46III panel.zip
The comments you make there will appear in the posts below.
stockplane
Charter Member
Rami thanks a lot for Ki-43 upgrade, i have not read your post before. Thanks again.
Another question, i have post some images for Kelti, in the pos i have seen the thumbnails bat also the image where i could be wrong?
And for the images for the uploads what is the best size for SOH?
Thanks in advanced.
Best regards
Another question, i have post some images for Kelti, in the pos i have seen the thumbnails bat also the image where i could be wrong?
And for the images for the uploads what is the best size for SOH?
Thanks in advanced.
Best regards