-
Please see the most recent updates in the "Where did the .com name go?" thread. Posts number 16 and 17.
OK dumb question time
- Thread starter noddy
- Start date
, not got a clue.
Paul Anderson
Charter Member
Not likely in model folder, changes usually made to aircraft.cfg or the .air file.
Have seen a few with a gauge folder entry and a panel.cfg entry, but rare.
What to do should be documented in the downloaded update file.
As always, backup your particular aircraft's folder first before applying, that way you can revert back if not satisfactory or copy any added repaints to the new aircraft.cfg if that was what was changed.
Have seen a few with a gauge folder entry and a panel.cfg entry, but rare.
What to do should be documented in the downloaded update file.
As always, backup your particular aircraft's folder first before applying, that way you can revert back if not satisfactory or copy any added repaints to the new aircraft.cfg if that was what was changed.
hschuit
SOH-CM-2026
Noddy, the FDE is defined by the *.air and the Aircraft.cfg file. Both need to be put directly in the (addon) aircraft folder (aka container). For the RAZBAM A-7E/D that would be:
Aircraft folder (container) = \SimObjects\Airplanes\RAZBAM A-7 Corsair II
If you look inside this folder, you will see the Aircraft.cfg and the A-7.air file in there.
In the case of the FDE mod, those 2 files need to be replaced with the ones I attached in the Razbam A-7E fde thread.
Aircraft folder (container) = \SimObjects\Airplanes\RAZBAM A-7 Corsair II
If you look inside this folder, you will see the Aircraft.cfg and the A-7.air file in there.
In the case of the FDE mod, those 2 files need to be replaced with the ones I attached in the Razbam A-7E fde thread.