• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

OT:Need some help with a system upgrade.

P

Peter SWE

Charter Member
I needed some more oomph for FSX so i bought a new E8500 duo core to replace my old P4 3,8 singel core.

The problem is that the system won't boot with the new processor. It boot up fine with the P4 but not with the E8500.

I've had the processor tested with another system and it worked with that one so the processor seems ok.

I've tryed with different hard drives and OS, both XP and Vista.

I've also tryed with different cooling fans.

None of this has helped.

I got at Gigabyte G32M-ES2L motherboard and according to the Gigabyte webpage it is compatible with the Intel E8500.

Anyone that has an idea what's wrong?
 
Hmmmm

take some peripherals out and try booting with minimum equipment. Also try with 1 ram stick

Normally a 500w PSU should be fine, but what model is it and how old is it?

I'm pretty stumped as to what this could be.

And you're CERTAIN the motherboard accepts the Core 2 Duo?
 
I think you need to put the old P4 back in and flash the mobo for the newer chip..

Once thats done switch chips and you are golden
 
ryanbatc said:
Hmmmm

take some peripherals out and try booting with minimum equipment. Also try with 1 ram stick

Normally a 500w PSU should be fine, but what model is it and how old is it?

I'm pretty stumped as to what this could be.

And you're CERTAIN the motherboard accepts the Core 2 Duo?
Click to expand...


Good morning.

I am never certain of anything:wiggle: The box that the mobo came in states that the e8500 is compatible.

I did try with a skelleton setup, using onboard grafics and 1gb ram, still grounded with that.
 
Peter..

Browse your motherboards disk that you have... In the software section you will see a tool called * @BIOS *

Thats what you want..

You will have to go to Gigabyte site and get the latest flash for that chip and download it to your desktop..

Once its there you run the @BIOS tool and select .Ummm,Not looking at it now...But browse it to your one on the desktop...NOT from the Gigabyte server, as it will choose the one for the P4....


Now ..When flashing..make SURE AntiVirus is OFF..If it will not turn off..UNINSTALL it completely...


The flash takes about 30 seconds..touch NOTHING...No keyboard or mouse..Stand back and let it go...


Thats it....You will be prompted to reboot and you are done...




Your MoBo will run that chip...But it only has the flash to see the P4 now and run it ...
 
This is starting to get frustrating.

I now got the latest bios and all the latest drivers.

The Gigabyte web clearly states that my G31M-ES2L motherboard takes the Intel E8500 core 2 duo. The box that the mobo came in also states this. The salesperson that sold me the mobo sayes that it will take any intel socket 775 processor.

The result of the moboflash was that now XP boots but freeze completely after 5-6seconds. Vista still does'ent boot.


What have i missed here?
 
Odd I build systems very week with the gigabyte G31 Mobo.


You have a different issue than that I feel.....

Its a easy to set up motherboard....


Perhaps if you are using the same HDD with the same OS on it that might be your problem...Not all motherboards will just run a HDD with an OS already installed.


I suggest you put an old HDD in and reload windows and see..Then if it boots you need to save everything from the other HDD and reformat and partition it and reinstall again



nevermind...its a new chip...Not mobo right...



What bios flash are you using? F something?
 
Thanks for trying to help me, i really appreciate it!

I'm running Bios F10.

Gonna format a HD and make a fresh install with the new processor when i get back home from work later today.
 
I must have been born with bad luck...

I finaly snapped with the gigabyte mobo and mailed it to the military to use for targetpractise.
I went out and got a Asus P5Q deluxe, installed everything, hit the switch and.... Nothing. This mobo is dead, completely. No post,no bios, no screen, no nothing. I also had to get a new cabinet to house this bigger mobo.

After looking around on the net a couple of hours it seems that there is a lot of people having the same issue with this card. New cards dead on delivery. Lots of threads with descriptions of problems but no solutions.

Think i'm gonna cry myself to sleep now.
 
Nothing at all???

You should at least get fans up and running...Check your 24 pin and 8 pin (maybe 4 pin) and see if they are tight...


Could your PSU have died?????
 
I finaly figured it out.

After reading an old review of the asus p5q from its introduction indicating that it has an severe incompabilityproblem with certain memory modules. I started trying with different memorysticks and suddenly found one that worked. It started bios so i could flash it with the latest version and after that it booted up.

Strange. With the wrong memorystick the motherboard is completely dead, the fans are turning but nothing else. There are a lot of threads on techforums where people have problems with the P5Q so asus must have missed something when they wrote the BIOS the first time.

But again, what do i know? My knowlege in computerhardware is very limited.

Now i got windows but still no sound. Again, from reading at techforums, there are a lot of threads on this problem but no solutions.

Strangely enough i cant find any drivers for the onboard soundmax avalible for download anywhere.


Again, thanks harleyman for all your input!
 
You must log in or register to reply here.
Back
Top