Piglets OS2U-3 Kingfisher

Sure

I don't have the location for the Kingfisher............but you can make your own from the Martin Mariners or Consolidated Coronado's we did a couple of years ago.......maybe that's what got you interested???

You need to go to www.simvation.com or www.flightsim.com and search for the above..........there is a wake effect mod also.........

Main ingredients........

1. Dap "GreenGhost" Gauge goes in Gauges folder (See Martin or Consolidated Panel.cfg for the exact name)

2. fx_bowsprayPBM or PB2y...........goes in effects. Edit this with Notepad or Wordpad to locate wakes per the plane ...........will take some trial and error.

3. Textures from Fs2002 for wakes.........go in the CFS2 textures folder.

4. Need to add to lights in aircraft.cfg .........(see config for Martin or Consolidated)..........the line fx_bowsprayPBM or PB2Y or Kingfisher .....whatever

5. Edit Panel.cfg to add a line for the DAP "GreenGhost" Gauge........(again see panel config for Martin or Consolidated).

6. Scrape Points...........forgot ...........aircraft.cfg has to have belly landing scrape points. Copy from Martin or Consolidated and edit to fit the kingfisher.......if it doesnt already land in water.
 
Thanks for all of the good stuff Rockster! :applause:
Very informative. Now I have something to save into my notes for future ref.
Thanks a Heap, Dave
 
Editing The fx

Hey Rockster, Do you remember the section in the .fx file that needs to be changed? It seems to be emitter.1 emmiter.2 emmiter.3 ....would this be correct?

//RightAux fx_Spray
[Emitter.3]
Lifetime=0.00, 0.00
Delay=0.00, 0.00
Bounce=0.00
No Interpolate=1
Rate=160.00, 160.00
X Emitter Velocity=0.00, 0.00
Y Emitter Velocity=0.00, 0.00
Z Emitter Velocity=0.00, 0.00
Drag=0.00, 0.00
X Particle Velocity=0.00, 0.00
Y Particle Velocity=0.00, 0.00
Z Particle Velocity=0.00, 0.00
X Rotation=0.00, 0.00
Y Rotation=0.00, 0.00
Z Rotation=0.00, 0.00
X Offset=10.94, 10.94
Y Offset=-0.3658, -0.3658
Z Offset=2.692, 2.692
Pitch=0.00, 0.00
Bank=0.00, 0.00
Heading=0.00, 0.00

Everything is above the water at the moment. Figured to fix this first. So the fix for this above water should first be corrected in the aircraft.cfg?
[lights]
panel=0, 0.28, -0.2, fx_bowspPBM

Thanks Mang, Dave
 
I think so........

I think you manipulate the locations x,y,x individually with the effects as you have highlighted.....

you can locate the entire effect with the lights x,y,z .......but gives you no control over the pontoon in relationship to the plane main wake.. etc.
 
Little Time Saver

Dvslats and Everyone,

You are welcome to give this fx a try, or use the emitter x,y,z values for the file you already have. Cheers. :kilroy:
 
I was just horse'in around with the effects.......

Thanks..............I was trying to fix the PBM effects.......with some problems...........

shot shown is yours........Oglivie

I was also playing around with the catapult off a VN North Carolina....also

(Ya.......the regulars have been thru this many times........I know..........revist is still fun for a spin)
 
Nice shots, Rockster. The cat launches are fun. It's been awhile since I catapulted the Kingfisher, I have to give er spin again. Cheers.
 
Another nice wake effect, Oglivie!

Rockster, can you explain how to do the catapult takeoff?

Cheers,

skylane
 
Ships to Carriers.........Catapult Lauches

For a CFS2 addict .......like myself...........this is second nature.........but........explanation .........means I have to think about it......

Lets see............hmmmmm...........

1. Download Piglets KingFisher ...........

2. Download Olgivies effects...........

3. Download Virtual Navy North Carolina.........

4. Download GC Swordfish Floatplane and british Weapons Pack by Groundcrew Design Group w/HMS Rodney.......

5. Download Abacus Flight Dynamic Editor............

Should I stop now ........cause its some work.............

6. Install VN North Carolina per usual ship add on procedures....

a. Edit Ship dp N. Carolina and allow CFS2 recognize as a carrier.......

[MISC_DATA]
unit_family=7
category=13
allegiance=1
min_speed=0
cruise_speed=40
max_speed=40
entered_service=12/1/41

[LANDING AIDS]
LSO.0=-91.287,18.3,-13.4012,0,0,0
cable.0=-91.287,18.3,-13.4012,-91.287,18.3,11.7988
cable.1=-88.3827,18.3,-13.4012,-88.3827,18.3,11.7988
cable.2=-85.2827,18.3,-13.4012,-85.2827,18.3,11.7988
cable.3=-82.2827,18.3,-13.4012,-82.2827,18.3,11.7988
meatball.0=-85.2827,18.3,11.7988

b. Edit ship.cfg to give N. Carolina a Virtual Deck...........as needed........here is my quick,down, and dirty platform from screen shots............you need to refine......because you could land back on if you get the deck right.........I didn't finish. Plus, you could make it narrow..er to get it to start of the middle better....alot of room for improvment.

[flight_deck_section]

; this section defines the control points the
; AI (and LSO) use to steer towards the flight deck
width=20
length=241
takeoff_start=.25,13,35
takeoff_stop=.25,13,100
landing_start=.25,500,-5000
landing_touch_down=0.1920005,12,-81.536003
landing_stop=0.1920005,12,0

[platform.0]
vertex.0=10.880001,11.5,-117.376007
vertex.1=-12.416,11.5,-117.632004
vertex.2=-12.672001,11.5,-106.624008
vertex.3=-13.824001,11.5,-81.408005
vertex.4=-13.952001,11.5,-49.152004
vertex.5=-16.256001,11.5,-7.296
vertex.6=-16.256001,11.5,49.280003
vertex.7=-12.800001,11.5,76.800003
vertex.8=-12.800001,10.5,99.200005
vertex.9=-11.52,10.5,119.040009
vertex.10=12.800001,10.5,119.040009
vertex.11=14.336,10.5,100.224007
vertex.12=14.336,10.5,75.008003
vertex.13=14.336,10.5,48.256004
vertex.14=17.920002,10.5,-14.336
vertex.15=15.360001,10.5,-18.944
vertex.16=13.952001,10.5,-35.712002
vertex.17=14.080001,10.5,-81.536003
vertex.18=11.392001,10.5,-106.368004

[LANDING AIDS]
cable.0=13.312001,11.5,-81.536003,-12.928,16.896,-81.536003
cable.1=13.312001,11.5,-78.592003,-12.928,16.896,-78.592003
cable.2=13.312001,11.5,-75.520004,-12.928,16.896,-75.520004
cable.3=13.312001,11.5,-72.320007,-12.928,16.896,-72.320007

[Dynamics]
pitch_wave_moment_scale = 1
bank_wave_moment_scale = 1
pitch_damp_moment_scale = 1
bank_damp_moment_scale = 1

7. Open GC Swordfish air file with dynamic editor and rename and save as Piglets Kingfisher airfile.............edit dynamics per your taste..............I did a quick down and dirty swap for a quick spin.......

8. Follow my instructions above on how to add wake effect using Olgivies fx_bowspray

9. Use Mission Builder to add VN North Carolina with a Kingfisher take off

10. Use The "W" key for catapult shot..............

11. If this doen't work........then I left out a step............but don't know which one.......

12. Observe all copywritten material............conversion restrictions........and obey the laws of the pack..........
 
Hi All
Very nice wake effect ,thanks Rockster for the list I 'll copy the post and I will do a try ,that will make some nice flight starting point :gameon::bump:

JP
 
Kingfisher

HELPPPPP!!!

I look for the kingfisher for FSX.
I do not find to download, for the link in top no longer walks!

If you have a solution, Thank you for advances.
(Sorry for the translation electronique)

José Dragon65 -LFBT-
 
Rats...

dragon65 said:
... "Not Found

The requested URL /hijinx/****-off.gif/ was not found on this server." Glupps !!!...
Click to expand...

I keep forgetting that you have to log in to Sim Network,and then search for the actual aircratf BEFORE it can be downloaded !

Give it another try, Dragon
SC
 
You must log in or register to reply here.
Back
Top