Plane Design Spitfire XVI Working in FSX

SpaceWeevil

SpaceWeevil

SOH-CM-2024
Apologies if this is already well known, but I came across a patch for the Plane Design Spitfire XVI that seems to make the VC gauges fully functional in FSX. There are three patches - one for the full-span model, one for the clipped and one that modifies a gauge background, available at Flightsim.com - http://www.flightsim.com/vbfs/fslib.php?do=copyright&fid=173170

The patch works by modifying the .mdl files, and there's nothing in the ReadMe to suggest the author Alain L'Homme approached Ed Waters for his consent. My usual attitude to licence conditions is pretty rigid but in this case my moral compass nudges towards 'OK' - the PD Spit doesn't seem to be under active development for FSX, unless anyone knows different.

Other caveats are that it only patches the military (non-IFR) models, and there are the usual FS9 to FSX prop & canopy issues (easily improved by darkening the alpha channels on the two prop and two transparency textures). If you already own the PD Spitfire for FS9 and can live with all that, and don't mind that it's much trickier to handle than either the RealAir or A2A Spitfires, you may be able to enjoy once again the best Spitfire never made for FSX.
 
I doubt very much that Ed gave his permission as the model is still on sale. It's been a while since I've spoken to him but I know his wife was ill and this is probably the main reason he's slipped off radar.

ATB
DaveB:)
 
DaveB said:
I doubt very much that Ed gave his permission as the model is still on sale. It's been a while since I've spoken to him but I know his wife was ill and this is probably the main reason he's slipped off radar.

ATB
DaveB:)
Click to expand...

Do you really think it is necessary for devs to agree to the release of patchers to make a model work in another sim without supplying the models themselves? I own the PD Spit, love it, and am glad that someone provided a patcher to make it work once again in a more modern sim.

There is no breach of copyright here. No one provided the original models, just a proggie to make original buyers enjoy their purchases in another sim. I ported over several of my FS9 models to FSX and P3D. Does that make me a pirate? I don't think so. Neither do I think it necessary to go on a wich hunt here. Lord knows that SOH is one site that doesn't allow nor approve piracy.

IMHO original and legit buyers can do whatever they want to the things they bought, as long as they don't "share" it. if I want to fly the PD Spitfire in FSX or P3D in a "Pope Mobile" guise, I can and no one can stop me. Because I own it.

Dumonceau
 
I take it you're having a bad day!!

The original comment said there appeared to be no mention of any permission given by Ed Walters and I followed it by saying I doubt any had been given as the model is still on sale. That's all.

Was there really any need for that tirade?? No.. I don't think so.

ATB
DaveB:)
 
DaveB said:
I take it you're having a bad day!!

The original comment said there appeared to be no mention of any permission given by Ed Walters and I followed it by saying I doubt any had been given as the model is still on sale. That's all.

Was there really any need for that tirade?? No.. I don't think so.

ATB
DaveB:)
Click to expand...

Hi Dave,

I wish you would contact Ed. I have several times since he released this superb version. He has other unreleased versions and textures. I have never been able to get him interested in any further work on his Spitfires.

Regards, Bill
 
I might give this conversion a try.

I was wondering, however, if someone could post the other texture files needed: propdisc.bmp, propslow.bmp, vcglass.bmp and vcperspex.bmp.

The instruction say "You must find then on the web or used by another airplanes", but since there are four files I would hope that someone already has done this?

Just thought I'd ask... :adoration:
 
Wings of Gold said:
Hi Dave,

I wish you would contact Ed. I have several times since he released this superb version. He has other unreleased versions and textures. I have never been able to get him interested in any further work on his Spitfires.

Regards, Bill
Click to expand...

Hi Bill:wavey:

Yup.. it was a shame he was pulled away though I understand his reasons for stepping back. I still have a beta of his Avro York and kept all the betas of the Spit and Lancaster. Don't have the heart to throw them away.. just in case;) Many have said how they'd love to have the Lancaster and Lancastrian re-done to FSX format and I can't argue with that;)

ATB
DaveB:)
 
Dumonceau said:
IMHO original and legit buyers can do whatever they want to the things they bought, as long as they don't "share" it. if I want to fly the PD Spitfire in FSX or P3D in a "Pope Mobile" guise, I can and no one can stop me. Because I own it.

Dumonceau
Click to expand...

Actually, that's not entirely correct.
Example...Microsoft's EULA refers to 'reverse engineering' something done by many but in fact 'illegal' as it contravenes the MS copyright agreement.

Copyright restrictions depend on the specific product and need not be universal or generic.\

I can, for example release an 'artwork' under the specific 'rule' that it can only be used/viewed once, however it's kinda hard to 'police'...;)
 
How about....you can 'purchase' or earn money but it is a criminal offence to destroy it ie. burn ...;)
 
Hi Dave,

Ed's wife is doing fine now, thankfully. But between his family and work he has been very busy. There has been some talk of making some new products for FSX, but it's just a matter of finding the time. Thanks for your support.

Regards,

Ken
 
It's okay, guys. I think I can handle it from here.

2015-2-9_19-30-50-823_zpsvjux6kyu.jpg


2015-2-9_19-39-1-977_zps7oabpyzb.jpg


2015-2-9_19-47-25-859_zpsw58xldtj.jpg
 
Anyone tried to port this over to P3DV2? I've tried but I get an error message and P3D closes down.
Mike
 
Sundog said:
Hi Dave,

Ed's wife is doing fine now, thankfully. But between his family and work he has been very busy. There has been some talk of making some new products for FSX, but it's just a matter of finding the time. Thanks for your support.

Regards,

Ken
Click to expand...

Ah.. thanks for that Ken.. great news;)

CavOk
I'm sure I've seen shots of it in P3D but I honestly can't remember if it was v2.
ATB
DaveB:)
 
Just love having this back and flying in FSX.

Was wondering if anyone knows of a solution to the flickering VC gauge needles. Seems that the needles flicker on/off for the brakes, oil temp, Radiator temp, slip & turn Indicator and vsi. Other gauges are fine. Problem seems to come and go if I shift the view in the VC. I had read something about needles missing for some users, but don't recall this problem for FS9.
 
I'll take a look mate. From what I remember.. the gauges are all modelled (eg, they're 3D not 2D bitmaps). I don't have the update you're using though so I may see something completely different:biggrin-new:

EDIT: No.. the only 'issue' I have is the one I've always had and that's the bars on the AH go jaggy at anything but horizontal. I get the same with a few other models so it's probably an issue with my screenres and/or AA coupled with the thickness (or thinness) of the bars;)

ATB
DaveB:)
 
Last edited:
Wings of Gold said:
Hi Dave,

I wish you would contact Ed. I have several times since he released this superb version. He has other unreleased versions and textures. I have never been able to get him interested in any further work on his Spitfires.

Regards, Bill
Click to expand...

He gave me the other models he was working on and I will tell you they are awesome, they were for FS9 also but I have been flying with known issues mainly because I love the darn things that much. Sadly the texture mapping is not very good as they were never changed from the other variants. I mainly fly them in a gray paint with civil buno for my own enjoyment as he asked me not to share. I too have asked him to consider continuing his work but to no avail., real life has it importance in life also.


I'd love to see someone like M2M or Milviz buy them off him to finish his work for FSX.
 
DaveB said:
I'll take a look mate. From what I remember.. the gauges are all modelled (eg, they're 3D not 2D bitmaps). I don't have the update you're using though so I may see something completely different:biggrin-new:

EDIT: No.. the only 'issue' I have is the one I've always had and that's the bars on the AH go jaggy at anything but horizontal. I get the same with a few other models so it's probably an issue with my screenres and/or AA coupled with the thickness (or thinness) of the bars;)

ATB
DaveB:)
Click to expand...
Okay. Thanks for looking. Wish I knew more about how individual textures behave in FSX.
 
Hmm.. well the gauge textures are in individual files (in the PD Spit Texture folder) covering the panel, gauges and needles. To the best of my knowledge, Ed was the first outside Real Air to master 3D gauges and they've since been taken up by many.. some given exotic names. They still remain a mystery to me though. I was much happier with 2D:biggrin-new: Hopefully.. one of the experts here will be of some use;)

ATB
DaveB:)
 
You must log in or register to reply here.
Back
Top